[Mon Jun 10 22:42:50 2013] Detection parameters:
  Position = (345.1, 260.5) = 13 25 33.44 -43 0 20.5
  Extent = 0.8" x 0.5", rotation angle = 31 degrees
  Source counts = 12.8 +/- 3.9
  Background counts = 2.2
  Rate = 0.002 +/- 0.0007

[Mon Jun 10 22:42:50 2013] Off-axis axis estimate = 2.89'
[Mon Jun 10 23:01:51 2013] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 23:01:51 2013] Initial guess for spatial extent in simple fitting = 0.56"
[Mon Jun 10 23:01:51 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.124
[Mon Jun 10 23:01:51 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 0.56"
[Mon Jun 10 23:54:37 2013] fullrun_ccd3_acisf13303_pi14-548_cl_pass0_src31.ximg exists
[Mon Jun 10 23:54:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13303_pi14-548_cl_pass0_src31.csv
[Mon Jun 10 23:54:37 2013] fullrun_ccd3_acisf13303_pi14-548_cl_pass0_src31_1.ximg exists
[Mon Jun 10 23:54:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13303_pi14-548_cl_pass0_src31.csv
[Mon Jun 10 23:54:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13303_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13303_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:54:38 2013] fullrun_ccd3_acisf13303_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Mon Jun 10 23:54:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13303_pi14-548_cl_pass0_tfrozen_src31.csv
[Mon Jun 10 23:54:38 2013] fullrun_ccd3_acisf13303_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Jun 10 23:54:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13303_pi14-548_cl_pass0_tfrozen_src31.csv
[Mon Jun 10 23:54:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13303_pi14-548_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13303_pi14-548_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 23:54:47 2013] Spatial fit model total counts = 21.090500, observed total counts = 24.000000
[Mon Jun 10 23:54:47 2013] Offset between fit and detection position for source 38 = 0.560442 pixels
[Mon Jun 10 23:54:47 2013] 20.982950 total counts/ 6.994850 bgd. counts: snr = 5.288951
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.560442 pixels
  Position = (345.6, 260.7) = 13 25 33.44 -43 0 20.6
  Extent = 0.9 (0.7-1.5)" x 0.4 (0.3-0.6)", rotation angle = 342 (324-359) degrees
  Source counts = 14.0 +/- 4.6
  Background counts = 7.0
  Rate = 0.003 +/- 0.0008
[Mon Jun 10 23:54:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 23:54:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 23:54:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 23:54:47 2013] Source does appear to be extended
[Mon Jun 10 23:54:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Mon Jun 10 23:54:47 2013] Deleting source due to low Poisson probability 0.9