[Fri Aug 14 00:13:25 2015] Detection parameters:
  Position = (995.9, 1081.5) = 0 42 39.53 41 14 28.2
  Extent = 0.5" x 0.5", rotation angle = 152 degrees
  Source counts = 15.8 +/- 4.0
  Background counts = 0.2
  Rate = 0.004 +/- 0.001

[Fri Aug 14 00:13:26 2015] Off-axis axis estimate = 1.80'
[Fri Aug 14 00:14:03 2015] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 00:14:03 2015] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Aug 14 00:14:03 2015] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.838
[Fri Aug 14 00:14:03 2015] Giving source the simple spatial ID 27 for pass 0, mean size = 0.41"
[Fri Aug 14 00:14:03 2015] fullrun_ccd3_acisf13302_pi14-548_cl_pass0_src27.ximg exists
[Fri Aug 14 00:14:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13302_pi14-548_cl_pass0_src27.csv
[Fri Aug 14 00:14:03 2015] fullrun_ccd3_acisf13302_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Aug 14 00:14:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13302_pi14-548_cl_pass0_src27.csv
[Fri Aug 14 00:14:03 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13302_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13302_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:14:04 2015] fullrun_ccd3_acisf13302_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Aug 14 00:14:04 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13302_pi14-548_cl_pass0_tfrozen_src27.csv
[Fri Aug 14 00:14:04 2015] fullrun_ccd3_acisf13302_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Aug 14 00:14:04 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13302_pi14-548_cl_pass0_tfrozen_src27.csv
[Fri Aug 14 00:14:04 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13302_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13302_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:14:15 2015] Spatial fit model total counts = 15.321800, observed total counts = 17.000000
[Fri Aug 14 00:14:15 2015] Offset between fit and detection position for source 11 = 0.711194 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.711194 pixels
  Position = (996.4, 1082.0) = 0 42 39.53 41 14 28.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 15.3 +/- 3.9
  Background counts = 0.0
  Rate = 0.004 +/- 0.001
[Fri Aug 14 00:14:15 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 00:14:15 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 00:14:15 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 00:14:15 2015] Source does appear to be extended
[Fri Aug 14 00:14:15 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 14 00:14:32 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 00:14:32 2015] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Aug 14 00:14:32 2015] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.843
[Fri Aug 14 00:14:32 2015] Giving source the simple spatial ID 27 for pass 1, mean size = 0.41"
[Fri Aug 14 00:14:32 2015] fullrun_ccd3_acisf13302_pi14-548_cl_pass1_src27.ximg exists
[Fri Aug 14 00:14:32 2015] fullrun_ccd3_acisf13302_pi14-548_cl_pass1_src27_1.ximg exists
[Fri Aug 14 00:14:32 2015] Fit fullrun_ccd3_acisf13302_pi14-548_cl_pass1_src27 appears to have run properly
[Fri Aug 14 00:14:33 2015] fullrun_ccd3_acisf13302_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Fri Aug 14 00:14:33 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13302_pi14-548_cl_pass1_tfrozen_src27.csv
[Fri Aug 14 00:14:33 2015] fullrun_ccd3_acisf13302_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Aug 14 00:14:33 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13302_pi14-548_cl_pass1_tfrozen_src27.csv
[Fri Aug 14 00:14:33 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13302_pi14-548_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13302_pi14-548_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:14:45 2015] Spatial fit model total counts = 14.909800, observed total counts = 17.000000
[Fri Aug 14 00:14:45 2015] Offset between fit and detection position for source 11 = 0.009603 pixels
[Fri Aug 14 00:14:45 2015] 14.866400 total counts/ 0.000000 bgd. counts: snr = 122033374555131.812500
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.009603 pixels
  Position = (996.4, 1082.0) = 0 42 39.53 41 14 28.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.004 +/- 0.001
[Fri Aug 14 00:14:45 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 00:14:45 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 00:14:45 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 00:14:45 2015] Source does appear to be extended
[Fri Aug 14 00:14:45 2015] Computing asymmetry using major and minor axis, asym = 1.00