[Thu Aug 15 21:25:09 2013] Detection parameters:
  Position = (978.1, 683.8) = 0 43 2.89 41 15 22.4
  Extent = 0.5" x 0.5", rotation angle = 23 degrees
  Source counts = 50.5 +/- 7.1
  Background counts = 0.5
  Rate = 0.01 +/- 0.002

[Thu Aug 15 21:25:09 2013] Off-axis axis estimate = 3.99'
[Thu Aug 15 21:42:13 2013] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Thu Aug 15 21:42:13 2013] Initial guess for spatial extent in simple fitting = 0.83"
[Thu Aug 15 21:42:13 2013] source mask rpix=1.7, npix_max = 18, mask sum = 10, frac = 0.527
[Thu Aug 15 21:42:13 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.83"
[Thu Aug 15 22:07:04 2013] fullrun_ccd1_acisf13300_pi14-548_cl_pass0_src9.ximg exists
[Thu Aug 15 22:07:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13300_pi14-548_cl_pass0_src9.csv
[Thu Aug 15 22:07:04 2013] fullrun_ccd1_acisf13300_pi14-548_cl_pass0_src9_1.ximg exists
[Thu Aug 15 22:07:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13300_pi14-548_cl_pass0_src9.csv
[Thu Aug 15 22:07:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13300_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13300_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 15 22:07:04 2013] fullrun_ccd1_acisf13300_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Thu Aug 15 22:07:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13300_pi14-548_cl_pass0_tfrozen_src9.csv
[Thu Aug 15 22:07:04 2013] fullrun_ccd1_acisf13300_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Aug 15 22:07:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13300_pi14-548_cl_pass0_tfrozen_src9.csv
[Thu Aug 15 22:07:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13300_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13300_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 15 23:08:25 2013] Spatial fit model total counts = 82.002000, observed total counts = 74.000000
[Thu Aug 15 23:08:25 2013] Offset between fit and detection position for source 1 = 0.896782 pixels
[Thu Aug 15 23:08:25 2013] 80.549500 total counts/ 16.033700 bgd. counts: snr = 16.111991
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.896782 pixels
  Position = (978.4, 684.6) = 0 43 2.90 41 15 22.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 64.5 +/- 9.0
  Background counts = 16.0
  Rate = 0.02 +/- 0.002
[Thu Aug 15 23:08:25 2013] Vigneting correction estimate = 1.000000
[Thu Aug 15 23:08:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 15 23:08:25 2013] Assessing source extent using major axis lower bound
[Thu Aug 15 23:08:25 2013] Source does appear to be extended
[Thu Aug 15 23:08:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 15 23:20:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 15 23:20:47 2013] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Aug 15 23:20:47 2013] source mask rpix=1.2, npix_max = 11, mask sum = 7, frac = 0.620
[Thu Aug 15 23:20:47 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.58"
[Thu Aug 15 23:46:02 2013] fullrun_ccd1_acisf13300_pi14-548_cl_pass1_src9.ximg exists
[Thu Aug 15 23:46:02 2013] fullrun_ccd1_acisf13300_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Aug 15 23:46:02 2013] Fit fullrun_ccd1_acisf13300_pi14-548_cl_pass1_src9 appears to have run properly
[Thu Aug 15 23:46:02 2013] fullrun_ccd1_acisf13300_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Aug 15 23:46:02 2013] fullrun_ccd1_acisf13300_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Aug 15 23:46:02 2013] Fit fullrun_ccd1_acisf13300_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Aug 16 00:45:36 2013] Spatial fit model total counts = 86.776600, observed total counts = 80.000000
[Fri Aug 16 00:45:36 2013] Offset between fit and detection position for source 1 = 0.154965 pixels
[Fri Aug 16 00:45:36 2013] 87.927500 total counts/ 21.461900 bgd. counts: snr = 14.347058
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.154965 pixels
  Position = (978.4, 684.5) = 0 43 2.90 41 15 22.5
  Extent = 0.7 (0.6-0.9)" x 0.5 (0.4-0.6)", rotation angle = 6 (335-29) degrees
  Source counts = 66.5 +/- 9.4
  Background counts = 21.5
  Rate = 0.02 +/- 0.002
[Fri Aug 16 00:45:36 2013] Vigneting correction estimate = 1.000000
[Fri Aug 16 00:45:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 16 00:45:36 2013] Assessing source extent using major axis lower bound
[Fri Aug 16 00:45:36 2013] Source does appear to be extended
[Fri Aug 16 00:45:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Fri Aug 16 00:52:10 2013] Writing source region out to fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1_src.reg
[Fri Aug 16 00:52:10 2013] Extracting stamp from image fullrun_ccd1_acisf13300_pi14-548_cl_sm2.00.img.gz, (946, 652) - (1011, 717)
[Fri Aug 16 00:52:10 2013] Writing fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1.gif
[Fri Aug 16 00:56:53 2013] Size of ../../acisf13300/products/events/fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1_src.evt.gz[events] = 65 counts
[Fri Aug 16 00:56:53 2013] Mean chipx,y = (254.74, 682.05)
[Fri Aug 16 00:56:53 2013] Mean tdetx,y = (4449.95, 4361.74)
[Fri Aug 16 00:56:53 2013] chipx,y range = (237.00-273.00, 662.00-698.00)
[Fri Aug 16 00:56:53 2013] Size of ../../acisf13300/products/events/fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 9 counts
[Fri Aug 16 00:56:54 2013] Not generating rmf since there are only 66 counts
[Fri Aug 16 00:56:54 2013] arf not found, will run specextract
[Fri Aug 16 00:57:23 2013] ../../acisf13300/products/spectra/fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1.warf not found
[Fri Aug 16 00:57:23 2013] ../../acisf13300/products/spectra/fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1.wrmf not found
[Fri Aug 16 00:57:23 2013] Removal of ../../acisf13300/products/spectra/fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1.soff failed
[Fri Aug 16 01:02:42 2013] Spectrum 1 has only 66 counts, deleting rmf
[Fri Aug 16 01:02:42 2013] 188.081
[Fri Aug 16 01:39:19 2013] Updating aperture counts using extracted products
[Fri Aug 16 01:39:19 2013] Total counts from fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1_src.pi.gz = 65.00
[Fri Aug 16 01:39:19 2013] Total counts from fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1_bgd.pi.gz = 9.00
[Fri Aug 16 01:39:19 2013] Got source and background scale factors 0.000001, 0.000017
[Fri Aug 16 01:39:19 2013] User source parameters:
  Position = (978.4, 684.5) = 0 43 2.90 41 15 22.5
  Extent = 0.7 (0.6-0.9)" x 0.5 (0.4-0.6)", rotation angle = 6 (335-29) degrees
  Source aperture counts = 64.4 +/- 9.1
  Background aperture counts = 0.6
  Rate = 0.02 +/- 0.002

[Fri Aug 16 01:39:20 2013] Calculating source flux in energy range 0.30-8.00
[Fri Aug 16 01:39:20 2013] Using photon index=1.80, rate=0.017, arf fullrun_ccd1_acisf13300_pi14-548_pass1_cl_src1.arf
[Fri Aug 16 01:39:20 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 16 01:39:20 2013] Updating source flux to 2e-13
[Fri Aug 16 01:39:44 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting