[Wed Jun 19 23:35:33 2013] Detection parameters:
  Position = (136.6, 847.8) = 0 42 41.42 41 15 23.7
  Extent = 0.5" x 0.5", rotation angle = 169 degrees
  Source counts = 19.5 +/- 4.5
  Background counts = 0.5
  Rate = 0.005 +/- 0.001

[Wed Jun 19 23:35:33 2013] Off-axis axis estimate = 1.31'
[Thu Jun 20 00:27:41 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:27:41 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Jun 20 00:27:41 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.912
[Thu Jun 20 00:27:41 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 0.38"
[Thu Jun 20 01:10:20 2013] fullrun_ccd3_acisf13298_pi14-548_cl_pass0_src29.ximg exists
[Thu Jun 20 01:10:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13298_pi14-548_cl_pass0_src29.csv
[Thu Jun 20 01:10:20 2013] fullrun_ccd3_acisf13298_pi14-548_cl_pass0_src29_1.ximg exists
[Thu Jun 20 01:10:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13298_pi14-548_cl_pass0_src29.csv
[Thu Jun 20 01:10:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13298_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13298_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 01:10:20 2013] fullrun_ccd3_acisf13298_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 20 01:10:20 2013] fullrun_ccd3_acisf13298_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 20 01:10:20 2013] Fit fullrun_ccd3_acisf13298_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Jun 20 01:21:41 2013] Spatial fit model total counts = 19.108600, observed total counts = 21.000000
[Thu Jun 20 01:21:41 2013] Offset between fit and detection position for source 20 = 0.669017 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.669017 pixels
  Position = (137.0, 848.4) = 0 42 41.42 41 15 23.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 18.9 +/- 4.4
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Thu Jun 20 01:21:41 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 01:21:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 01:21:41 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 01:21:41 2013] Source does appear to be extended
[Thu Jun 20 01:21:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 02:09:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 02:09:42 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Jun 20 02:09:42 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.930
[Thu Jun 20 02:09:42 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 0.38"
[Thu Jun 20 02:48:04 2013] fullrun_ccd3_acisf13298_pi14-548_cl_pass1_src29.ximg exists
[Thu Jun 20 02:48:04 2013] fullrun_ccd3_acisf13298_pi14-548_cl_pass1_src29_1.ximg exists
[Thu Jun 20 02:48:04 2013] Fit fullrun_ccd3_acisf13298_pi14-548_cl_pass1_src29 appears to have run properly
[Thu Jun 20 02:48:05 2013] fullrun_ccd3_acisf13298_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Thu Jun 20 02:48:05 2013] fullrun_ccd3_acisf13298_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Jun 20 02:48:05 2013] Fit fullrun_ccd3_acisf13298_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Thu Jun 20 02:58:10 2013] Spatial fit model total counts = 20.064800, observed total counts = 21.000000
[Thu Jun 20 02:58:10 2013] Offset between fit and detection position for source 20 = 0.004214 pixels
[Thu Jun 20 02:58:10 2013] 19.928860 total counts/ 1.156260 bgd. counts: snr = 17.458088
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.004214 pixels
  Position = (137.0, 848.4) = 0 42 41.42 41 15 23.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 18.8 +/- 4.5
  Background counts = 1.2
  Rate = 0.005 +/- 0.001
[Thu Jun 20 02:58:10 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 02:58:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 02:58:10 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 02:58:10 2013] Source does appear to be extended
[Thu Jun 20 02:58:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 03:26:11 2013] Writing source region out to fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20_src.reg
[Thu Jun 20 03:26:11 2013] Extracting stamp from image fullrun_ccd3_acisf13298_pi14-548_cl_sm2.00.img.gz, (120, 831) - (154, 866)
[Thu Jun 20 03:26:11 2013] Writing fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20.gif
[Thu Jun 20 03:43:36 2013] Size of ../../acisf13298/products/events/fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20_src.evt.gz[events] = 19 counts
[Thu Jun 20 03:43:36 2013] Mean chipx,y = (916.37, 861.84)
[Thu Jun 20 03:43:36 2013] Mean tdetx,y = (4270.16, 3977.37)
[Thu Jun 20 03:43:36 2013] chipx,y range = (898.00-933.00, 848.00-881.00)
[Thu Jun 20 03:43:36 2013] Size of ../../acisf13298/products/events/fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 3 counts
[Thu Jun 20 03:43:37 2013] Not generating rmf since there are only 18 counts
[Thu Jun 20 03:43:37 2013] arf not found, will run specextract
[Thu Jun 20 03:44:05 2013] ../../acisf13298/products/spectra/fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20.warf not found
[Thu Jun 20 03:44:05 2013] ../../acisf13298/products/spectra/fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20.wrmf not found
[Thu Jun 20 03:44:05 2013] Removal of ../../acisf13298/products/spectra/fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20.soff failed
[Thu Jun 20 03:52:04 2013] Spectrum 20 has only 19 counts, deleting rmf
[Thu Jun 20 03:52:04 2013] 201.187
[Thu Jun 20 03:52:34 2013] Updating aperture counts using extracted products
[Thu Jun 20 03:52:34 2013] Total counts from fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20_src.pi.gz = 19.00
[Thu Jun 20 03:52:34 2013] Total counts from fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20_bgd.pi.gz = 3.00
[Thu Jun 20 03:52:34 2013] Got source and background scale factors 0.000000, 0.000005
[Thu Jun 20 03:52:34 2013] User source parameters:
  Position = (137.0, 848.4) = 0 42 41.42 41 15 23.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source aperture counts = 18.7 +/- 5.4
  Background aperture counts = 0.3
  Rate = 0.005 +/- 0.001

[Thu Jun 20 03:52:36 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 03:52:36 2013] Using photon index=1.80, rate=0.00482, arf fullrun_ccd3_acisf13298_pi14-548_pass1_cl_src20.arf
[Thu Jun 20 03:52:36 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jun 20 03:52:36 2013] Updating source flux to 5.4e-14
[Thu Jun 20 03:53:08 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting