[Fri Aug 14 00:06:25 2015] Detection parameters:
  Position = (815.5, 1004.5) = 8 24 5.52 -42 55 3.5
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 46.6 +/- 14.2
  Background counts = 154.4
  Rate = 0.003 +/- 0.001

[Fri Aug 14 00:06:42 2015] Off-axis axis estimate = 1.79'
[Fri Aug 14 00:12:04 2015] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 00:12:04 2015] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Aug 14 00:12:04 2015] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.262
[Fri Aug 14 00:12:04 2015] Giving source the simple spatial ID 70 for pass 0, mean size = 0.41"
[Fri Aug 14 00:12:05 2015] fullrun_ccd7_acisf13293_pi14-548_cl_pass0_src70.ximg exists
[Fri Aug 14 00:12:05 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13293_pi14-548_cl_pass0_src70.csv
[Fri Aug 14 00:12:05 2015] fullrun_ccd7_acisf13293_pi14-548_cl_pass0_src70_1.ximg exists
[Fri Aug 14 00:12:05 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13293_pi14-548_cl_pass0_src70.csv
[Fri Aug 14 00:12:05 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13293_pi14-548_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13293_pi14-548_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:12:06 2015] fullrun_ccd7_acisf13293_pi14-548_cl_pass0_tfrozen_src70.ximg exists
[Fri Aug 14 00:12:06 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13293_pi14-548_cl_pass0_tfrozen_src70.csv
[Fri Aug 14 00:12:06 2015] fullrun_ccd7_acisf13293_pi14-548_cl_pass0_tfrozen_src70_1.ximg exists
[Fri Aug 14 00:12:06 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13293_pi14-548_cl_pass0_tfrozen_src70.csv
[Fri Aug 14 00:12:06 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13293_pi14-548_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13293_pi14-548_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:12:24 2015] Spatial fit model total counts = 934.637000, observed total counts = 1084.000000
[Fri Aug 14 00:12:24 2015] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 14 00:12:25 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 00:12:25 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 00:12:25 2015] Assessing source extent using major
[Fri Aug 14 00:12:25 2015] Source does appear to be extended
[Fri Aug 14 00:12:25 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 14 00:12:25 2015] Deleting source due to low Poisson probability 0.9