[Tue Jul 2 07:05:57 2013] Detection parameters: Position = (316.6, 457.1) = 16 27 15.91 -49 9 24.4 Extent = 0.6" x 0.5", rotation angle = 9 degrees Source counts = 15.6 +/- 4.0 Background counts = 0.4 Rate = 0.002 +/- 0.0004 [Tue Jul 2 07:05:57 2013] Off-axis axis estimate = 3.66' [Tue Jul 2 08:46:49 2013] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting [Tue Jul 2 08:46:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Jul 2 08:46:49 2013] Initial guess for spatial extent in simple fitting = 0.73" [Tue Jul 2 08:46:49 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010 [Tue Jul 2 08:46:49 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.73" [Tue Jul 2 08:52:17 2013] fullrun_ccd3_acisf13287_pi14-548_cl_pass0_src5.ximg exists [Tue Jul 2 08:52:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13287_pi14-548_cl_pass0_src5.csv [Tue Jul 2 08:52:17 2013] fullrun_ccd3_acisf13287_pi14-548_cl_pass0_src5_1.ximg exists [Tue Jul 2 08:52:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13287_pi14-548_cl_pass0_src5.csv [Tue Jul 2 08:52:17 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf13287_pi14-548_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf13287_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 2 08:52:17 2013] fullrun_ccd3_acisf13287_pi14-548_cl_pass0_tfrozen_src5.ximg exists [Tue Jul 2 08:52:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13287_pi14-548_cl_pass0_tfrozen_src5.csv [Tue Jul 2 08:52:17 2013] fullrun_ccd3_acisf13287_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists [Tue Jul 2 08:52:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13287_pi14-548_cl_pass0_tfrozen_src5.csv [Tue Jul 2 08:52:17 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf13287_pi14-548_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf13287_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 2 08:52:25 2013] Spatial fit model total counts = 14.611100, observed total counts = 16.000000 [Tue Jul 2 08:52:25 2013] Offset between fit and detection position for source 5 = 0.598844 pixels Spatial fit parameters: Offset between fit and detection position for source 5 = 0.598844 pixels Position = (317.0, 457.5) = 16 27 15.91 -49 9 24.5 Extent = 0.8 (0.5-0.9)" x 0.5 (0.4-0.7)", rotation angle = 355 (316-29) degrees Source counts = 14.6 +/- 3.8 Background counts = 0.0 Rate = 0.001 +/- 0.0004 [Tue Jul 2 08:52:25 2013] Vigneting correction estimate = 1.000000 [Tue Jul 2 08:52:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jul 2 08:52:25 2013] Assessing source extent using major axis lower bound [Tue Jul 2 08:52:25 2013] Source does appear to be extended [Tue Jul 2 08:52:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.80 [Tue Jul 2 10:07:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Jul 2 10:07:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Jul 2 10:07:48 2013] Initial guess for spatial extent in simple fitting = 0.66" [Tue Jul 2 10:07:48 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.878 [Tue Jul 2 10:07:48 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.66" [Tue Jul 2 10:13:23 2013] fullrun_ccd3_acisf13287_pi14-548_cl_pass1_src5.ximg exists [Tue Jul 2 10:13:23 2013] fullrun_ccd3_acisf13287_pi14-548_cl_pass1_src5_1.ximg exists [Tue Jul 2 10:13:23 2013] Fit fullrun_ccd3_acisf13287_pi14-548_cl_pass1_src5 appears to have run properly [Tue Jul 2 10:13:23 2013] fullrun_ccd3_acisf13287_pi14-548_cl_pass1_tfrozen_src5.ximg exists [Tue Jul 2 10:13:23 2013] fullrun_ccd3_acisf13287_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists [Tue Jul 2 10:13:23 2013] Fit fullrun_ccd3_acisf13287_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly [Tue Jul 2 10:13:30 2013] Spatial fit model total counts = 15.865500, observed total counts = 16.000000 [Tue Jul 2 10:13:30 2013] Offset between fit and detection position for source 5 = 0.152112 pixels Spatial fit parameters: Offset between fit and detection position for source 5 = 0.152112 pixels Position = (317.0, 457.6) = 16 27 15.91 -49 9 24.4 Extent = 0.8 (0.6-1.1)" x 0.4 (0.3-0.5)", rotation angle = 353 (330-13) degrees Source counts = 15.9 +/- 4.0 Background counts = 0.0 Rate = 0.002 +/- 0.0004 [Tue Jul 2 10:13:30 2013] Vigneting correction estimate = 1.000000 [Tue Jul 2 10:13:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jul 2 10:13:30 2013] Assessing source extent using major axis lower bound [Tue Jul 2 10:13:30 2013] Source does appear to be extended [Tue Jul 2 10:13:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09 [Tue Jul 2 10:36:23 2013] Writing source region out to fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5_src.reg [Tue Jul 2 10:36:23 2013] Extracting stamp from image fullrun_ccd3_acisf13287_pi14-548_cl_sm2.00.img.gz, (280, 420) - (355, 495) [Tue Jul 2 10:36:23 2013] Writing fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5.gif [Tue Jul 2 10:38:52 2013] Size of ../../acisf13287/products/events/fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5_src.evt.gz[events] = 16 counts [Tue Jul 2 10:38:52 2013] Mean chipx,y = (512.69, 977.44) [Tue Jul 2 10:38:52 2013] Mean tdetx,y = (4154.56, 3573.69) [Tue Jul 2 10:38:52 2013] chipx,y range = (495.00-525.00, 960.00-990.00) [Tue Jul 2 10:38:52 2013] Size of ../../acisf13287/products/events/fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 16 counts [Tue Jul 2 10:38:53 2013] Not generating rmf since there are only 15 counts [Tue Jul 2 10:38:53 2013] arf not found, will run specextract [Tue Jul 2 10:39:21 2013] ../../acisf13287/products/spectra/fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5.warf not found [Tue Jul 2 10:39:21 2013] ../../acisf13287/products/spectra/fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5.wrmf not found [Tue Jul 2 10:39:21 2013] Removal of ../../acisf13287/products/spectra/fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5.soff failed [Tue Jul 2 10:42:48 2013] Spectrum 5 has only 16 counts, deleting rmf [Tue Jul 2 10:42:48 2013] 165.124 [Tue Jul 2 10:42:59 2013] Updating aperture counts using extracted products [Tue Jul 2 10:42:59 2013] Total counts from fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5_src.pi.gz = 16.00 [Tue Jul 2 10:42:59 2013] Total counts from fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5_bgd.pi.gz = 16.00 [Tue Jul 2 10:42:59 2013] Got source and background scale factors 0.000001, 0.000025 [Tue Jul 2 10:42:59 2013] User source parameters: Position = (317.0, 457.6) = 16 27 15.91 -49 9 24.4 Extent = 0.8 (0.6-1.1)" x 0.4 (0.3-0.5)", rotation angle = 353 (330-13) degrees Source aperture counts = 15.3 +/- 5.1 Background aperture counts = 0.7 Rate = 0.002 +/- 0.0005 [Tue Jul 2 10:43:00 2013] Calculating source flux in energy range 0.30-8.00 [Tue Jul 2 10:43:00 2013] Using photon index=1.80, rate=0.00158, arf fullrun_ccd3_acisf13287_pi14-548_pass1_cl_src5.arf [Tue Jul 2 10:43:00 2013] Assuming count rate is from the 0.20-8.00 bandpass [Tue Jul 2 10:43:00 2013] Updating source flux to 3.3e-14 [Tue Jul 2 10:43:13 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting