[Fri Jun 14 12:40:43 2013] Detection parameters:
  Position = (885.2, 410.6) = 13 11 12.26 -34 30 21.3
  Extent = 1.6" x 1.2", rotation angle = 164 degrees
  Source counts = 13.4 +/- 3.9
  Background counts = 1.6
  Rate = 0.001 +/- 0.0004

[Fri Jun 14 12:40:44 2013] Off-axis axis estimate = 7.06'
[Fri Jun 14 12:59:10 2013] Using EEF radius (= 2.22 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 12:59:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 12:59:10 2013] Initial guess for spatial extent in simple fitting = 2.22"
[Fri Jun 14 12:59:10 2013] source mask rpix=4.5, npix_max = 100, mask sum = 100, frac = 0.997
[Fri Jun 14 12:59:10 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 2.22"
[Fri Jun 14 13:02:44 2013] fullrun_ccd3_acisf13285_pi14-548_cl_pass0_src3.ximg exists
[Fri Jun 14 13:02:44 2013] fullrun_ccd3_acisf13285_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Jun 14 13:02:44 2013] Fit fullrun_ccd3_acisf13285_pi14-548_cl_pass0_src3 appears to have run properly
[Fri Jun 14 13:02:44 2013] fullrun_ccd3_acisf13285_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 14 13:02:44 2013] fullrun_ccd3_acisf13285_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 14 13:02:44 2013] Fit fullrun_ccd3_acisf13285_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 14 13:27:07 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 24.416986 pixels away
[Fri Jun 14 13:27:07 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 13:27:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 13:27:07 2013] Assessing source extent using major
[Fri Jun 14 13:27:07 2013] Source does appear to be extended
[Fri Jun 14 13:27:07 2013] Computing asymmetry using major and minor axis, asym = 1.30
[Fri Jun 14 13:42:31 2013] Using EEF radius (= 2.22 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 13:42:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 13:42:31 2013] Initial guess for spatial extent in simple fitting = 2.22"
[Fri Jun 14 13:42:31 2013] source mask rpix=4.5, npix_max = 100, mask sum = 100, frac = 0.997
[Fri Jun 14 13:42:31 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 2.22"
[Fri Jun 14 13:46:24 2013] fullrun_ccd3_acisf13285_pi14-548_cl_pass1_src3.ximg exists
[Fri Jun 14 13:46:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13285_pi14-548_cl_pass1_src3.csv
[Fri Jun 14 13:46:24 2013] fullrun_ccd3_acisf13285_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Jun 14 13:46:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13285_pi14-548_cl_pass1_src3.csv
[Fri Jun 14 13:46:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13285_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13285_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 13:46:24 2013] fullrun_ccd3_acisf13285_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 14 13:46:24 2013] fullrun_ccd3_acisf13285_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 14 13:46:24 2013] Fit fullrun_ccd3_acisf13285_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 14 14:14:07 2013] Spatial fit model total counts = 15.004800, observed total counts = 15.000000
[Fri Jun 14 14:14:07 2013] Offset between fit and detection position for source 4 = 1.293532 pixels
[Fri Jun 14 14:14:07 2013] 15.282320 total counts/ 5.014020 bgd. counts: snr = 4.585699
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.293532 pixels
  Position = (886.2, 409.8) = 13 11 12.24 -34 30 22.0
  Extent = 1.1 (0.6-1.5)", rotation angle = 0
  Source counts = 10.3 +/- 3.9
  Background counts = 5.0
  Rate = 0.001 +/- 0.0004
[Fri Jun 14 14:14:07 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:14:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:14:07 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:14:07 2013] Source does appear to be extended
[Fri Jun 14 14:14:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:24:21 2013] Writing source region out to fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4_src.reg
[Fri Jun 14 14:24:21 2013] Extracting stamp from image fullrun_ccd3_acisf13285_pi14-548_cl_sm2.00.img.gz, (836, 359) - (937, 460)
[Fri Jun 14 14:24:21 2013] Writing fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4.gif
[Fri Jun 14 14:24:57 2013] Size of ../../acisf13285/products/events/fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4_src.evt.gz[events] = 12 counts
[Fri Jun 14 14:24:57 2013] Mean chipx,y = (652.25, 209.42)
[Fri Jun 14 14:24:57 2013] Mean tdetx,y = (4922.58, 3713.25)
[Fri Jun 14 14:24:57 2013] chipx,y range = (637.00-672.00, 190.00-228.00)
[Fri Jun 14 14:24:57 2013] Size of ../../acisf13285/products/events/fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 10 counts
[Fri Jun 14 14:24:58 2013] Not generating rmf since there are only 10 counts
[Fri Jun 14 14:24:58 2013] arf not found, will run specextract
[Fri Jun 14 14:25:19 2013] ../../acisf13285/products/spectra/fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4.warf not found
[Fri Jun 14 14:25:19 2013] ../../acisf13285/products/spectra/fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4.wrmf not found
[Fri Jun 14 14:25:19 2013] Removal of ../../acisf13285/products/spectra/fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4.soff failed
[Fri Jun 14 14:28:02 2013] Spectrum 4 has only 10 counts, deleting rmf
[Fri Jun 14 14:28:02 2013] 175.742
[Fri Jun 14 14:28:41 2013] Updating aperture counts using extracted products
[Fri Jun 14 14:28:41 2013] Total counts from fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4_src.pi.gz = 12.00
[Fri Jun 14 14:28:41 2013] Total counts from fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4_bgd.pi.gz = 10.00
[Fri Jun 14 14:28:41 2013] Got source and background scale factors 0.000004, 0.000044
[Fri Jun 14 14:28:41 2013] User source parameters:
  Position = (886.2, 409.8) = 13 11 12.24 -34 30 22.0
  Extent = 1.1 (0.6-1.5)", rotation angle = 0
  Source aperture counts = 11.2 +/- 4.6
  Background aperture counts = 0.8
  Rate = 0.001 +/- 0.0005

[Fri Jun 14 14:28:41 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 14:28:41 2013] Using photon index=1.80, rate=0.00104, arf fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4.arf
[Fri Jun 14 14:28:41 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun 14 14:28:41 2013] Updating source flux to 1.4e-14
[Fri Jun 14 14:28:50 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 14:28:51 2013] acisf13285/analysis//spectral/fullrun_ccd3_acisf13285_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete