[Fri Jun 14 12:40:43 2013] Detection parameters:
  Position = (1072.7, 693.2) = 13 11 43.89 -34 25 0.5
  Extent = 1.0" x 0.5", rotation angle = 151 degrees
  Source counts = 23.4 +/- 4.9
  Background counts = 0.6
  Rate = 0.002 +/- 0.0005

[Fri Jun 14 12:40:43 2013] Off-axis axis estimate = 5.25'
[Fri Jun 14 12:53:35 2013] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 12:53:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 12:53:35 2013] Initial guess for spatial extent in simple fitting = 1.28"
[Fri Jun 14 12:53:35 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Fri Jun 14 12:53:35 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.28"
[Fri Jun 14 12:59:10 2013] fullrun_ccd2_acisf13285_pi14-548_cl_pass0_src1.ximg exists
[Fri Jun 14 12:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13285_pi14-548_cl_pass0_src1.csv
[Fri Jun 14 12:59:10 2013] fullrun_ccd2_acisf13285_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Jun 14 12:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13285_pi14-548_cl_pass0_src1.csv
[Fri Jun 14 12:59:10 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13285_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13285_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 12:59:10 2013] fullrun_ccd2_acisf13285_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 12:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13285_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Jun 14 12:59:10 2013] fullrun_ccd2_acisf13285_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 12:59:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13285_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Jun 14 12:59:10 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13285_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13285_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 13:27:06 2013] Spatial fit model total counts = 27.962400, observed total counts = 31.000000
[Fri Jun 14 13:27:06 2013] Offset between fit and detection position for source 2 = 0.901503 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.901503 pixels
  Position = (1072.1, 693.9) = 13 11 43.93 -34 25 0.5
  Extent = 1.7 (1.3-2.6)" x 0.8 (0.6-1.0)", rotation angle = 20 (7-35) degrees
  Source counts = 28.8 +/- 5.4
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Fri Jun 14 13:27:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 13:27:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 13:27:06 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 13:27:06 2013] Source does appear to be extended
[Fri Jun 14 13:27:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Fri Jun 14 13:36:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 13:36:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 13:36:43 2013] Initial guess for spatial extent in simple fitting = 1.25"
[Fri Jun 14 13:36:43 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.973
[Fri Jun 14 13:36:43 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.25"
[Fri Jun 14 13:42:31 2013] fullrun_ccd2_acisf13285_pi14-548_cl_pass1_src1.ximg exists
[Fri Jun 14 13:42:31 2013] fullrun_ccd2_acisf13285_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Jun 14 13:42:31 2013] Fit fullrun_ccd2_acisf13285_pi14-548_cl_pass1_src1 appears to have run properly
[Fri Jun 14 13:42:31 2013] fullrun_ccd2_acisf13285_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 14 13:42:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13285_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Jun 14 13:42:31 2013] fullrun_ccd2_acisf13285_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 14 13:42:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13285_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Jun 14 13:42:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13285_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13285_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:14:06 2013] Spatial fit model total counts = 28.092500, observed total counts = 31.000000
[Fri Jun 14 14:14:06 2013] Offset between fit and detection position for source 2 = 0.037985 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.037985 pixels
  Position = (1072.1, 694.0) = 13 11 43.93 -34 25 0.4
  Extent = 1.7 (1.3-2.5)" x 0.8 (0.6-1.0)", rotation angle = 22 (7-35) degrees
  Source counts = 28.8 +/- 5.4
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Fri Jun 14 14:14:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:14:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:14:06 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:14:06 2013] Source does appear to be extended
[Fri Jun 14 14:14:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.33
[Fri Jun 14 14:21:58 2013] Writing source region out to fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2_src.reg
[Fri Jun 14 14:21:58 2013] Extracting stamp from image fullrun_ccd2_acisf13285_pi14-548_cl_sm2.00.img.gz, (993, 614) - (1152, 774)
[Fri Jun 14 14:21:58 2013] Writing fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2.gif
[Fri Jun 14 14:22:00 2013] Size of ../../acisf13285/products/events/fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2_src.evt.gz[events] = 28 counts
[Fri Jun 14 14:22:00 2013] Mean chipx,y = (684.25, 880.32)
[Fri Jun 14 14:22:00 2013] Mean tdetx,y = (3941.32, 3401.75)
[Fri Jun 14 14:22:00 2013] chipx,y range = (666.00-704.00, 860.00-900.00)
[Fri Jun 14 14:22:00 2013] Size of ../../acisf13285/products/events/fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 27 counts
[Fri Jun 14 14:22:01 2013] Not generating rmf since there are only 28 counts
[Fri Jun 14 14:22:01 2013] arf not found, will run specextract
[Fri Jun 14 14:22:30 2013] ../../acisf13285/products/spectra/fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2.warf not found
[Fri Jun 14 14:22:30 2013] ../../acisf13285/products/spectra/fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2.wrmf not found
[Fri Jun 14 14:22:30 2013] Removal of ../../acisf13285/products/spectra/fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2.soff failed
[Fri Jun 14 14:24:20 2013] Spectrum 2 has only 29 counts, deleting rmf
[Fri Jun 14 14:24:20 2013] 157.925
[Fri Jun 14 14:28:40 2013] Updating aperture counts using extracted products
[Fri Jun 14 14:28:40 2013] Total counts from fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2_src.pi.gz = 28.00
[Fri Jun 14 14:28:40 2013] Total counts from fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2_bgd.pi.gz = 27.00
[Fri Jun 14 14:28:40 2013] Got source and background scale factors 0.000004, 0.000111
[Fri Jun 14 14:28:40 2013] User source parameters:
  Position = (1072.1, 694.0) = 13 11 43.93 -34 25 0.4
  Extent = 1.7 (1.3-2.5)" x 0.8 (0.6-1.0)", rotation angle = 22 (7-35) degrees
  Source aperture counts = 27.0 +/- 6.4
  Background aperture counts = 1.0
  Rate = 0.003 +/- 0.0006

[Fri Jun 14 14:28:40 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 14:28:40 2013] Using photon index=1.80, rate=0.00293, arf fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2.arf
[Fri Jun 14 14:28:40 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun 14 14:28:40 2013] Updating source flux to 4.3e-14
[Fri Jun 14 14:28:49 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 14:28:50 2013] acisf13285/analysis//spectral/fullrun_ccd2_acisf13285_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete