[Fri Jun 14 12:40:41 2013] Detection parameters:
  Position = (1139.7, 960.0) = 13 11 56.70 -34 30 45.1
  Extent = 0.5" x 0.5", rotation angle = 26 degrees
  Source counts = 10.9 +/- 3.3
  Background counts = 0.1
  Rate = 0.001 +/- 0.0003

[Fri Jun 14 12:40:42 2013] Off-axis axis estimate = 2.16'
[Fri Jun 14 12:42:48 2013] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 12:42:48 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Jun 14 12:42:48 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.756
[Fri Jun 14 12:42:48 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.45"
[Fri Jun 14 12:49:53 2013] fullrun_ccd0_acisf13285_pi14-548_cl_pass0_src2.ximg exists
[Fri Jun 14 12:49:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13285_pi14-548_cl_pass0_src2.csv
[Fri Jun 14 12:49:53 2013] fullrun_ccd0_acisf13285_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Jun 14 12:49:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13285_pi14-548_cl_pass0_src2.csv
[Fri Jun 14 12:49:53 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13285_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13285_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 12:49:53 2013] fullrun_ccd0_acisf13285_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 14 12:49:53 2013] fullrun_ccd0_acisf13285_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 14 12:49:53 2013] Fit fullrun_ccd0_acisf13285_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun 14 13:27:05 2013] Spatial fit model total counts = 9.687820, observed total counts = 11.000000
[Fri Jun 14 13:27:05 2013] Offset between fit and detection position for source 2 = 0.843891 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.843891 pixels
  Position = (1140.3, 960.5) = 13 11 56.70 -34 30 45.0
  Extent = 0.8 (0.4-1.0)" x 0.4 (0.3-0.7)", rotation angle = 346 (326-0) degrees
  Source counts = 9.7 +/- 3.1
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri Jun 14 13:27:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 13:27:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 13:27:05 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 13:27:05 2013] Source does appear to be extended
[Fri Jun 14 13:27:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.65
[Fri Jun 14 13:27:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 13:27:19 2013] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Jun 14 13:27:19 2013] Spatial fitting skipped for pass 1: source                                 has 9.7 net counts, is at off-axis angle 2.2'
[Fri Jun 14 14:14:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:14:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:14:05 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:14:05 2013] Source does appear to be extended
[Fri Jun 14 14:14:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.65
[Fri Jun 14 14:14:24 2013] Writing source region out to fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2_src.reg
[Fri Jun 14 14:14:24 2013] Extracting stamp from image fullrun_ccd0_acisf13285_pi14-548_cl_sm2.00.img.gz, (1105, 926) - (1175, 995)
[Fri Jun 14 14:14:24 2013] Writing fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2.gif
[Fri Jun 14 14:15:06 2013] Size of ../../acisf13285/products/events/fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2_src.evt.gz[events] = 11 counts
[Fri Jun 14 14:15:06 2013] Mean chipx,y = (956.36, 846.45)
[Fri Jun 14 14:15:06 2013] Mean tdetx,y = (3907.45, 4175.64)
[Fri Jun 14 14:15:06 2013] chipx,y range = (944.00-976.00, 827.00-858.00)
[Fri Jun 14 14:15:06 2013] Size of ../../acisf13285/products/events/fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 4 counts
[Fri Jun 14 14:15:07 2013] Not generating rmf since there are only 9 counts
[Fri Jun 14 14:15:07 2013] arf not found, will run specextract
[Fri Jun 14 14:15:33 2013] ../../acisf13285/products/spectra/fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2.warf not found
[Fri Jun 14 14:15:33 2013] ../../acisf13285/products/spectra/fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2.wrmf not found
[Fri Jun 14 14:15:33 2013] Removal of ../../acisf13285/products/spectra/fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2.soff failed
[Fri Jun 14 14:20:17 2013] Spectrum 2 has only 10 counts, deleting rmf
[Fri Jun 14 14:20:17 2013] 187.209
[Fri Jun 14 14:28:38 2013] Updating aperture counts using extracted products
[Fri Jun 14 14:28:38 2013] Total counts from fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2_src.pi.gz = 11.00
[Fri Jun 14 14:28:38 2013] Total counts from fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2_bgd.pi.gz = 4.00
[Fri Jun 14 14:28:38 2013] Got source and background scale factors 0.000001, 0.000021
[Fri Jun 14 14:28:38 2013] User source parameters:
  Position = (1140.3, 960.5) = 13 11 56.70 -34 30 45.0
  Extent = 0.8 (0.4-1.0)" x 0.4 (0.3-0.7)", rotation angle = 346 (326-0) degrees
  Source aperture counts = 10.8 +/- 4.4
  Background aperture counts = 0.2
  Rate = 0.001 +/- 0.0004

[Fri Jun 14 14:28:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 14:28:39 2013] Using photon index=1.80, rate=0.000984, arf fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2.arf
[Fri Jun 14 14:28:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun 14 14:28:39 2013] Updating source flux to 1.2e-14
[Fri Jun 14 14:28:44 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 14:28:45 2013] acisf13285/analysis//spectral/fullrun_ccd0_acisf13285_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete