Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report srcpi bgdpi arf 1 X053031.45-043304.8 chandra ccd7 536.39 346.204 17.5807 4.25518 0.00644199 0.0015592 4.2772 0.999923 0.826914 0.181089 22.1761 3.48424 10.9629 0.981451 -0.835663 0.502493 A F 1.53e+21 5.23137e-14 1 dsx
Report srcpi bgdpi arf rmf 2 X053042.63-043501.7 chandra ccd7 196.67 108.65 555.912 24.2729 0.2037 0.00889421 135.247 1 0.404258 0.328568 26.5886 0.176742 455.587 79.7247 -0.702137 0.055177 F F 1.55e+21 1.17727e-12 1 dsxf

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 7.99 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), T = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest