[Thu Jul 18 21:39:25 2013] Detection parameters:
  Position = (820.3, 970.3) = 17 26 20.27 -34 38 20.4
  Extent = 0.5" x 0.5", rotation angle = 175 degrees
  Source counts = 10.8 +/- 3.5
  Background counts = 1.2
  Rate = 0.0002 +/- 6e-05

[Thu Jul 18 21:39:25 2013] Off-axis axis estimate = 5.41'
[Thu Jul 18 21:44:14 2013] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Thu Jul 18 21:44:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 18 21:44:14 2013] Initial guess for spatial extent in simple fitting = 1.35"
[Thu Jul 18 21:44:14 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.992
[Thu Jul 18 21:44:14 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 1.35"
[Thu Jul 18 21:52:12 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src4.ximg exists
[Thu Jul 18 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src4.csv
[Thu Jul 18 21:52:12 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Jul 18 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src4.csv
[Thu Jul 18 21:52:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 21:52:12 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Jul 18 21:52:12 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jul 18 21:52:12 2013] Fit fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Jul 18 23:10:42 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.824767 pixels away
[Thu Jul 18 23:10:42 2013] Vigneting correction estimate = 1.000000
[Thu Jul 18 23:10:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 18 23:10:42 2013] Assessing source extent using major
[Thu Jul 18 23:10:42 2013] Source does appear to be extended
[Thu Jul 18 23:10:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 18 23:11:13 2013] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Thu Jul 18 23:11:13 2013] Initial guess for spatial extent in simple fitting = 1.35"
[Thu Jul 18 23:11:13 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.992
[Thu Jul 18 23:11:13 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 1.35"
[Thu Jul 18 23:20:27 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src4.ximg exists
[Thu Jul 18 23:20:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src4.csv
[Thu Jul 18 23:20:27 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Jul 18 23:20:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src4.csv
[Thu Jul 18 23:20:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 23:20:27 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul 18 23:20:27 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul 18 23:20:27 2013] Fit fullrun_ccd0_acisf13267_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jul 19 00:26:44 2013] Spatial fit model total counts = 15.728000, observed total counts = 18.000000
[Fri Jul 19 00:26:44 2013] Offset between fit and detection position for source 4 = 1.076894 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.076894 pixels
  Position = (821.1, 971.1) = 17 26 20.26 -34 38 20.2
  Extent = 1.5 (1.1-2.2)" x 0.6 (0.4-0.9)", rotation angle = 17 (1-33) degrees
  Source counts = 16.2 +/- 4.0
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Fri Jul 19 00:26:44 2013] Vigneting correction estimate = 1.000000
[Fri Jul 19 00:26:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 19 00:26:44 2013] Assessing source extent using major axis lower bound
[Fri Jul 19 00:26:44 2013] Source does appear to be extended
[Fri Jul 19 00:26:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Fri Jul 19 00:27:11 2013] Writing source region out to fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4_src.reg
[Fri Jul 19 00:27:11 2013] Extracting stamp from image fullrun_ccd0_acisf13267_pi14-548_cl_sm2.00.img.gz, (755, 905) - (888, 1038)
[Fri Jul 19 00:27:11 2013] Writing fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4.gif
[Fri Jul 19 00:28:36 2013] Size of ../../acisf13267/products/events/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4_src.evt.gz[events] = 16 counts
[Fri Jul 19 00:28:36 2013] Mean chipx,y = (479.75, 857.31)
[Fri Jul 19 00:28:36 2013] Mean tdetx,y = (3918.31, 4652.25)
[Fri Jul 19 00:28:36 2013] chipx,y range = (465.00-502.00, 839.00-871.00)
[Fri Jul 19 00:28:36 2013] Size of ../../acisf13267/products/events/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 60 counts
[Fri Jul 19 00:28:38 2013] Not generating rmf since there are only 16 counts
[Fri Jul 19 00:28:38 2013] arf not found, will run specextract
[Fri Jul 19 00:29:06 2013] ../../acisf13267/products/spectra/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4.warf not found
[Fri Jul 19 00:29:06 2013] ../../acisf13267/products/spectra/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4.wrmf not found
[Fri Jul 19 00:29:06 2013] Removal of ../../acisf13267/products/spectra/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4.soff failed
[Fri Jul 19 00:32:57 2013] Spectrum 4 has only 16 counts, deleting rmf
[Fri Jul 19 00:32:57 2013] 180.883
[Fri Jul 19 01:23:19 2013] Updating aperture counts using extracted products
[Fri Jul 19 01:23:19 2013] Total counts from fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4_src.pi.gz = 16.00
[Fri Jul 19 01:23:19 2013] Total counts from fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4_bgd.pi.gz = 60.00
[Fri Jul 19 01:23:19 2013] Got source and background scale factors 0.000003, 0.000070
[Fri Jul 19 01:23:19 2013] User source parameters:
  Position = (821.1, 971.1) = 17 26 20.26 -34 38 20.2
  Extent = 1.5 (1.1-2.2)" x 0.6 (0.4-0.9)", rotation angle = 17 (1-33) degrees
  Source aperture counts = 13.7 +/- 5.1
  Background aperture counts = 2.3
  Rate = 0.0002 +/- 9e-05

[Fri Jul 19 01:23:20 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 19 01:23:20 2013] Using photon index=1.80, rate=0.000286, arf fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4.arf
[Fri Jul 19 01:23:20 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 19 01:23:20 2013] Updating source flux to 4.9e-15
[Fri Jul 19 01:23:38 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 19 01:23:39 2013] acisf13267/analysis//spectral/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete