[Thu Jul 18 21:39:25 2013] Detection parameters:
  Position = (802.3, 968.5) = 17 26 20.99 -34 38 21.3
  Extent = 1.1" x 0.5", rotation angle = 132 degrees
  Source counts = 15.5 +/- 4.1
  Background counts = 1.5
  Rate = 0.0003 +/- 7e-05

[Thu Jul 18 21:39:25 2013] Off-axis axis estimate = 5.31'
[Thu Jul 18 21:44:14 2013] Using EEF radius (= 1.31 ")to estimate initial spatial extent for simple fitting
[Thu Jul 18 21:44:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 18 21:44:14 2013] Initial guess for spatial extent in simple fitting = 1.31"
[Thu Jul 18 21:44:14 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.049
[Thu Jul 18 21:44:14 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.31"
[Thu Jul 18 21:52:12 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src1.ximg exists
[Thu Jul 18 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src1.csv
[Thu Jul 18 21:52:12 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jul 18 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src1.csv
[Thu Jul 18 21:52:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13267_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 21:52:12 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 18 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src1.csv
[Thu Jul 18 21:52:12 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 18 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src1.csv
[Thu Jul 18 21:52:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13267_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 23:10:42 2013] Spatial fit model total counts = 23.017100, observed total counts = 27.000000
[Thu Jul 18 23:10:42 2013] Offset between fit and detection position for source 1 = 0.439174 pixels
[Thu Jul 18 23:10:42 2013] 24.159480 total counts/ 1.202380 bgd. counts: snr = 20.936118
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.439174 pixels
  Position = (802.1, 968.1) = 17 26 21.02 -34 38 21.7
  Extent = 1.6 (1.3-1.9)", rotation angle = 0
  Source counts = 23.0 +/- 4.9
  Background counts = 1.2
  Rate = 0.0004 +/- 9e-05
[Thu Jul 18 23:10:42 2013] Vigneting correction estimate = 1.000000
[Thu Jul 18 23:10:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 18 23:10:42 2013] Assessing source extent using major axis lower bound
[Thu Jul 18 23:10:42 2013] Source does appear to be extended
[Thu Jul 18 23:10:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 18 23:11:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 18 23:11:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 18 23:11:13 2013] Initial guess for spatial extent in simple fitting = 1.57"
[Thu Jul 18 23:11:13 2013] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.173
[Thu Jul 18 23:11:13 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.57"
[Thu Jul 18 23:20:27 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src1.ximg exists
[Thu Jul 18 23:20:27 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Jul 18 23:20:27 2013] Fit fullrun_ccd0_acisf13267_pi14-548_cl_pass1_src1 appears to have run properly
[Thu Jul 18 23:20:27 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 18 23:20:27 2013] fullrun_ccd0_acisf13267_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 18 23:20:27 2013] Fit fullrun_ccd0_acisf13267_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 19 00:26:44 2013] Spatial fit model total counts = 28.658100, observed total counts = 28.000000
[Fri Jul 19 00:26:44 2013] Offset between fit and detection position for source 1 = 0.475657 pixels
[Fri Jul 19 00:26:44 2013] 29.160100 total counts/ 8.688500 bgd. counts: snr = 6.945114
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.475657 pixels
  Position = (802.5, 968.0) = 17 26 21.00 -34 38 21.8
  Extent = 1.5 (1.2-1.8)", rotation angle = 0
  Source counts = 20.5 +/- 5.4
  Background counts = 8.7
  Rate = 0.0004 +/- 0.0001
[Fri Jul 19 00:26:44 2013] Vigneting correction estimate = 1.000000
[Fri Jul 19 00:26:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 19 00:26:44 2013] Assessing source extent using major axis lower bound
[Fri Jul 19 00:26:44 2013] Source does appear to be extended
[Fri Jul 19 00:26:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 19 00:27:11 2013] Writing source region out to fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1_src.reg
[Fri Jul 19 00:27:11 2013] Extracting stamp from image fullrun_ccd0_acisf13267_pi14-548_cl_sm2.00.img.gz, (734, 899) - (871, 1037)
[Fri Jul 19 00:27:11 2013] Writing fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1.gif
[Fri Jul 19 00:27:12 2013] Size of ../../acisf13267/products/events/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1_src.evt.gz[events] = 26 counts
[Fri Jul 19 00:27:12 2013] Mean chipx,y = (500.19, 842.00)
[Fri Jul 19 00:27:12 2013] Mean tdetx,y = (3903.00, 4631.81)
[Fri Jul 19 00:27:12 2013] chipx,y range = (479.00-519.00, 824.00-860.00)
[Fri Jul 19 00:27:12 2013] Size of ../../acisf13267/products/events/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 65 counts
[Fri Jul 19 00:27:14 2013] Not generating rmf since there are only 20 counts
[Fri Jul 19 00:27:14 2013] arf not found, will run specextract
[Fri Jul 19 00:27:42 2013] ../../acisf13267/products/spectra/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1.warf not found
[Fri Jul 19 00:27:42 2013] ../../acisf13267/products/spectra/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1.wrmf not found
[Fri Jul 19 00:27:42 2013] Removal of ../../acisf13267/products/spectra/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1.soff failed
[Fri Jul 19 00:32:57 2013] Spectrum 1 has only 20 counts, deleting rmf
[Fri Jul 19 00:32:57 2013] 152.306
[Fri Jul 19 01:23:18 2013] Updating aperture counts using extracted products
[Fri Jul 19 01:23:19 2013] Total counts from fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1_src.pi.gz = 26.00
[Fri Jul 19 01:23:19 2013] Total counts from fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1_bgd.pi.gz = 65.00
[Fri Jul 19 01:23:19 2013] Got source and background scale factors 0.000007, 0.000081
[Fri Jul 19 01:23:19 2013] User source parameters:
  Position = (802.5, 968.0) = 17 26 21.00 -34 38 21.8
  Extent = 1.5 (1.2-1.8)", rotation angle = 0
  Source aperture counts = 20.3 +/- 6.2
  Background aperture counts = 5.7
  Rate = 0.0004 +/- 0.0001

[Fri Jul 19 01:23:20 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jul 19 01:23:20 2013] Using photon index=1.80, rate=0.000362, arf fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1.arf
[Fri Jul 19 01:23:20 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jul 19 01:23:20 2013] Updating source flux to 7.4e-15
[Fri Jul 19 01:23:38 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 19 01:23:39 2013] acisf13267/analysis//spectral/fullrun_ccd0_acisf13267_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete