[Wed Apr 18 11:13:11 2012] Detection parameters:
  Position = (231.7, 192.9) = 15 1 23.00 1 38 43.3
  Extent = 2.1" x 1.0", rotation angle = 176 degrees
  Source counts = 17.7 +/- 5.3
  Background counts = 10.3
  Rate = 0.0004 +/- 0.0001

[Wed Apr 18 11:13:11 2012] Off-axis axis estimate = 7.10'
[Wed Apr 18 12:45:02 2012] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Wed Apr 18 12:45:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 18 12:45:02 2012] Initial guess for spatial extent in simple fitting = 2.24"
[Wed Apr 18 12:45:02 2012] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.980
[Wed Apr 18 12:45:02 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 2.24"
[Wed Apr 18 13:30:02 2012] fullrun_ccd7_acisf13255_pi14-548_cl_pass0_src33.ximg exists
[Wed Apr 18 13:30:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13255_pi14-548_cl_pass0_src33.csv
[Wed Apr 18 13:30:02 2012] fullrun_ccd7_acisf13255_pi14-548_cl_pass0_src33_1.ximg exists
[Wed Apr 18 13:30:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13255_pi14-548_cl_pass0_src33.csv
[Wed Apr 18 13:30:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13255_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13255_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 18 13:30:02 2012] fullrun_ccd7_acisf13255_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Wed Apr 18 13:30:02 2012] fullrun_ccd7_acisf13255_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Apr 18 13:30:02 2012] Fit fullrun_ccd7_acisf13255_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Apr 18 13:30:16 2012] Spatial fit model total counts = 35.127900, observed total counts = 35.000000
[Wed Apr 18 13:30:16 2012] Offset between fit and detection position for source 35 = 2.744277 pixels
[Wed Apr 18 13:30:16 2012] 35.366700 total counts/ 21.307400 bgd. counts: snr = 3.045780
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 2.744277 pixels
  Position = (234.5, 192.9) = 15 1 22.93 1 38 43.1
  Extent = 1.1 (0.7-1.7)", rotation angle = 0
  Source counts = 14.1 +/- 5.9
  Background counts = 21.3
  Rate = 0.0003 +/- 0.0001
[Wed Apr 18 13:30:16 2012] Vigneting correction estimate = 1.000000
[Wed Apr 18 13:30:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 18 13:30:16 2012] Assessing source extent using major axis lower bound
[Wed Apr 18 13:30:16 2012] Source does appear to be extended
[Wed Apr 18 13:30:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 18 13:30:16 2012] Deleting source due to low Poisson probability 1.0