[Wed Apr 18 11:11:38 2012] Detection parameters:
  Position = (801.6, 737.3) = 15 1 48.86 1 44 4.3
  Extent = 3.1" x 2.6", rotation angle = 159 degrees
  Source counts = 236.3 +/- 16.9
  Background counts = 50.7
  Rate = 0.005 +/- 0.0004

[Wed Apr 18 11:11:38 2012] Off-axis axis estimate = 10.26'
[Wed Apr 18 11:37:32 2012] Using EEF radius (= 4.67 ")to estimate initial spatial extent for simple fitting
[Wed Apr 18 11:37:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 18 11:37:32 2012] Initial guess for spatial extent in simple fitting = 4.67"
[Wed Apr 18 11:37:32 2012] source mask rpix=9.5, npix_max = 398, mask sum = 400, frac = 1.003
[Wed Apr 18 11:37:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 4.67"
[Wed Apr 18 12:18:02 2012] fullrun_ccd3_acisf13255_pi14-548_cl_pass0_src1.ximg exists
[Wed Apr 18 12:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13255_pi14-548_cl_pass0_src1.csv
[Wed Apr 18 12:18:02 2012] fullrun_ccd3_acisf13255_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Apr 18 12:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13255_pi14-548_cl_pass0_src1.csv
[Wed Apr 18 12:18:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13255_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13255_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 18 12:18:03 2012] fullrun_ccd3_acisf13255_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Apr 18 12:18:03 2012] fullrun_ccd3_acisf13255_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Apr 18 12:18:03 2012] Fit fullrun_ccd3_acisf13255_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Apr 18 13:30:08 2012] Spatial fit model total counts = 313.999000, observed total counts = 314.000000
[Wed Apr 18 13:30:08 2012] Offset between fit and detection position for source 13 = 0.603623 pixels
[Wed Apr 18 13:30:08 2012] 313.622100 total counts/ 62.438100 bgd. counts: snr = 31.788288
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.603623 pixels
  Position = (801.9, 737.8) = 15 1 48.87 1 44 4.3
  Extent = 4.4 (4.0-4.8)", rotation angle = 0
  Source counts = 251.2 +/- 17.7
  Background counts = 62.4
  Rate = 0.006 +/- 0.0004
[Wed Apr 18 13:30:08 2012] Vigneting correction estimate = 1.000000
[Wed Apr 18 13:30:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 18 13:30:08 2012] Assessing source extent using major axis lower bound
[Wed Apr 18 13:30:08 2012] Source does appear to be extended
[Wed Apr 18 13:30:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 18 13:47:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 18 13:47:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 18 13:47:56 2012] Initial guess for spatial extent in simple fitting = 4.38"
[Wed Apr 18 13:47:56 2012] source mask rpix=8.9, npix_max = 352, mask sum = 342, frac = 0.969
[Wed Apr 18 13:47:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.38"
[Wed Apr 18 14:21:37 2012] fullrun_ccd3_acisf13255_pi14-548_cl_pass1_src1.ximg exists
[Wed Apr 18 14:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13255_pi14-548_cl_pass1_src1.csv
[Wed Apr 18 14:21:37 2012] fullrun_ccd3_acisf13255_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Apr 18 14:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13255_pi14-548_cl_pass1_src1.csv
[Wed Apr 18 14:21:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13255_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13255_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 18 14:21:37 2012] fullrun_ccd3_acisf13255_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Apr 18 14:21:37 2012] fullrun_ccd3_acisf13255_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Apr 18 14:21:37 2012] Fit fullrun_ccd3_acisf13255_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Apr 18 15:21:37 2012] Spatial fit model total counts = 306.001000, observed total counts = 306.000000
[Wed Apr 18 15:21:37 2012] Offset between fit and detection position for source 13 = 0.062158 pixels
[Wed Apr 18 15:21:37 2012] 305.823200 total counts/ 55.349200 bgd. counts: snr = 33.667198
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.062158 pixels
  Position = (801.9, 737.8) = 15 1 48.87 1 44 4.3
  Extent = 4.4 (3.9-4.8)", rotation angle = 0
  Source counts = 250.5 +/- 17.5
  Background counts = 55.3
  Rate = 0.006 +/- 0.0004
[Wed Apr 18 15:21:37 2012] Vigneting correction estimate = 1.000000
[Wed Apr 18 15:21:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 18 15:21:37 2012] Assessing source extent using major axis lower bound
[Wed Apr 18 15:21:37 2012] Source does appear to be extended
[Wed Apr 18 15:21:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 18 15:25:45 2012] Writing source region out to fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13_src.reg
[Wed Apr 18 15:25:45 2012] Extracting stamp from image fullrun_ccd3_acisf13255_pi14-548_cl_sm2.00.img.gz, (603, 539) - (1001, 937)
[Wed Apr 18 15:25:45 2012] Writing fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13.gif
[Wed Apr 18 15:25:47 2012] Size of ../../acisf13255/products/events/fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13_src.evt.gz[events] = 295 counts
[Wed Apr 18 15:25:47 2012] Mean chipx,y = (349.94, 677.35)
[Wed Apr 18 15:25:47 2012] Mean tdetx,y = (4454.65, 3410.94)
[Wed Apr 18 15:25:47 2012] chipx,y range = (304.00-392.00, 638.00-719.00)
[Wed Apr 18 15:25:47 2012] Size of ../../acisf13255/products/events/fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 402 counts
[Wed Apr 18 15:25:48 2012] rmf not found, will run specextract
[Wed Apr 18 15:25:48 2012] arf not found, will run specextract
[Wed Apr 18 15:26:14 2012] ../../acisf13255/products/spectra/fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13.warf not found
[Wed Apr 18 15:26:14 2012] ../../acisf13255/products/spectra/fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13.wrmf not found
[Wed Apr 18 15:26:14 2012] Removal of ../../acisf13255/products/spectra/fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13.soff failed
[Wed Apr 18 15:32:03 2012] Keeping rmf generated by specextract
[Wed Apr 18 15:32:03 2012] 162.477
[Wed Apr 18 15:52:49 2012] Updating aperture counts using extracted products
[Wed Apr 18 15:52:49 2012] Error reading totcts from fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Apr 18 15:52:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 18 15:52:49 2012] Using photon index=1.80, rate=0.00577, arf fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13.arf
[Wed Apr 18 15:52:49 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Apr 18 15:52:49 2012] Updating source flux to 8e-14
[Wed Apr 18 15:53:01 2012] Reading fit data from acisf13255/analysis//spectral/fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13_pl.csv
[Wed Apr 18 15:53:01 2012] Spectral fit parameter nH value = 1.00175e+14
[Wed Apr 18 15:53:01 2012] Spectral fit parameter PhoIndex value = 1.80998
[Wed Apr 18 15:53:01 2012] Failed to get F(0.3-8.0) from acisf13255/analysis//spectral/fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Wed Apr 18 15:53:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 18 15:53:01 2012] Using Nh = 1e+14, photon index=1.81, rate=0.00577, arf fullrun_ccd3_acisf13255_pi14-548_pass1_cl_src13.arf
[Wed Apr 18 15:53:01 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Apr 18 15:53:01 2012] Updating source flux to 8.4e-14