[Sat Apr 21 04:43:56 2012] Detection parameters:
  Position = (787.6, 546.6) = 15 1 4.92 1 41 36.3
  Extent = 0.8" x 0.6", rotation angle = 65 degrees
  Source counts = 243.3 +/- 17.1
  Background counts = 47.7
  Rate = 0.002 +/- 0.0001

[Sat Apr 21 04:43:58 2012] Off-axis axis estimate = 3.21'
[Sat Apr 21 07:41:42 2012] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Sat Apr 21 07:41:42 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Apr 21 07:41:42 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.717
[Sat Apr 21 07:41:42 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.63"
[Sat Apr 21 09:22:49 2012] fullrun_ccd7_acisf13253_pi14-548_cl_pass0_src6.ximg exists
[Sat Apr 21 09:22:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13253_pi14-548_cl_pass0_src6.csv
[Sat Apr 21 09:22:49 2012] fullrun_ccd7_acisf13253_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Apr 21 09:22:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13253_pi14-548_cl_pass0_src6.csv
[Sat Apr 21 09:22:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13253_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13253_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 21 09:22:50 2012] fullrun_ccd7_acisf13253_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Apr 21 09:22:50 2012] fullrun_ccd7_acisf13253_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Apr 21 09:22:50 2012] Fit fullrun_ccd7_acisf13253_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Apr 21 09:23:18 2012] Source 2 is offset by 5.662516 and 4.645182 pixels which is larger than
2 X fitted extent = 0.919715 x 0.919715, not incorporating fit results
[Sat Apr 21 09:23:18 2012] Vigneting correction estimate = 1.000000
[Sat Apr 21 09:23:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 21 09:23:18 2012] Assessing source extent using major
[Sat Apr 21 09:23:18 2012] Source does appear to be extended
[Sat Apr 21 09:23:18 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Sat Apr 21 12:02:33 2012] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Sat Apr 21 12:02:33 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Apr 21 12:02:33 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.717
[Sat Apr 21 12:02:33 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.63"
[Sat Apr 21 13:32:28 2012] fullrun_ccd7_acisf13253_pi14-548_cl_pass1_src6.ximg exists
[Sat Apr 21 13:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13253_pi14-548_cl_pass1_src6.csv
[Sat Apr 21 13:32:28 2012] fullrun_ccd7_acisf13253_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Apr 21 13:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13253_pi14-548_cl_pass1_src6.csv
[Sat Apr 21 13:32:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13253_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13253_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 21 13:32:28 2012] fullrun_ccd7_acisf13253_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Apr 21 13:32:28 2012] fullrun_ccd7_acisf13253_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Apr 21 13:32:28 2012] Fit fullrun_ccd7_acisf13253_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Apr 21 13:32:50 2012] Source 2 is offset by 5.662516 and 4.645182 pixels which is larger than
2 X fitted extent = 0.919791 x 0.919791, not incorporating fit results
[Sat Apr 21 13:32:50 2012] Vigneting correction estimate = 1.000000
[Sat Apr 21 13:32:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 21 13:32:50 2012] Assessing source extent using major
[Sat Apr 21 13:32:50 2012] Source does appear to be extended
[Sat Apr 21 13:32:50 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Sat Apr 21 14:07:53 2012] Writing source region out to fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2_src.reg
[Sat Apr 21 14:07:53 2012] Extracting stamp from image fullrun_ccd7_acisf13253_pi14-548_cl_sm2.00.img.gz, (750, 509) - (825, 584)
[Sat Apr 21 14:07:53 2012] Writing fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2.gif
[Sat Apr 21 14:09:36 2012] Size of ../../acisf13253/products/events/fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2_src.evt.gz[events] = 284 counts
[Sat Apr 21 14:09:36 2012] Mean chipx,y = (541.81, 331.99)
[Sat Apr 21 14:09:36 2012] Mean tdetx,y = (4458.81, 2033.99)
[Sat Apr 21 14:09:36 2012] chipx,y range = (521.00-567.00, 312.00-353.00)
[Sat Apr 21 14:09:36 2012] Size of ../../acisf13253/products/events/fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 595 counts
[Sat Apr 21 14:09:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr 21 14:09:37 2012] arf not found, will run specextract
[Sat Apr 21 14:09:44 2012] ../../acisf13253/products/spectra/fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2.warf not found
[Sat Apr 21 14:09:44 2012] ../../acisf13253/products/spectra/fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2.wrmf not found
[Sat Apr 21 14:09:44 2012] Removal of ../../acisf13253/products/spectra/fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2.soff failed
[Sat Apr 21 14:28:37 2012] Keeping rmf generated by specextract
[Sat Apr 21 14:28:37 2012] 226.231
[Sat Apr 21 14:28:44 2012] Updating aperture counts using extracted products
[Sat Apr 21 14:28:44 2012] Error reading totcts from fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Apr 21 14:28:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 21 14:28:45 2012] Using photon index=1.80, rate=0.00206, arf fullrun_ccd7_acisf13253_pi14-548_pass1_cl_src2.arf
[Sat Apr 21 14:28:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Apr 21 14:28:45 2012] Updating source flux to 1.6e-14
[Sat Apr 21 14:29:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting