[Sat Apr 21 04:43:25 2012] Detection parameters:
  Position = (801.4, 1089.1) = 15 0 57.22 1 54 25.1
  Extent = 3.4" x 1.3", rotation angle = 167 degrees
  Source counts = 13.5 +/- 5.2
  Background counts = 13.5
  Rate = 0.0001 +/- 4e-05

[Sat Apr 21 04:43:26 2012] Off-axis axis estimate = 10.05'
[Sat Apr 21 06:59:35 2012] Using EEF radius (= 4.47 ")to estimate initial spatial extent for simple fitting
[Sat Apr 21 06:59:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr 21 06:59:35 2012] Initial guess for spatial extent in simple fitting = 4.47"
[Sat Apr 21 06:59:35 2012] source mask rpix=9.1, npix_max = 367, mask sum = 313, frac = 0.851
[Sat Apr 21 06:59:35 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 4.47"
[Sat Apr 21 07:41:42 2012] fullrun_ccd6_acisf13253_pi14-548_cl_pass0_src30.ximg exists
[Sat Apr 21 07:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13253_pi14-548_cl_pass0_src30.csv
[Sat Apr 21 07:41:42 2012] fullrun_ccd6_acisf13253_pi14-548_cl_pass0_src30_1.ximg exists
[Sat Apr 21 07:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13253_pi14-548_cl_pass0_src30.csv
[Sat Apr 21 07:41:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13253_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13253_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 21 07:41:42 2012] fullrun_ccd6_acisf13253_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Sat Apr 21 07:41:42 2012] fullrun_ccd6_acisf13253_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Apr 21 07:41:42 2012] Fit fullrun_ccd6_acisf13253_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Sat Apr 21 09:23:05 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 49.834231 pixels away
[Sat Apr 21 09:23:05 2012] Vigneting correction estimate = 1.000000
[Sat Apr 21 09:23:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 21 09:23:05 2012] Assessing source extent using major
[Sat Apr 21 09:23:05 2012] Source does appear to be extended
[Sat Apr 21 09:23:05 2012] Computing asymmetry using major and minor axis, asym = 2.62
[Sat Apr 21 09:23:05 2012] Source is asymmetric
[Sat Apr 21 11:20:43 2012] Using EEF radius (= 4.47 ")to estimate initial spatial extent for simple fitting
[Sat Apr 21 11:20:43 2012] Initial guess for spatial extent in simple fitting = 4.47"
[Sat Apr 21 11:20:43 2012] source mask rpix=9.1, npix_max = 367, mask sum = 313, frac = 0.851
[Sat Apr 21 11:20:43 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 4.47"
[Sat Apr 21 12:02:33 2012] fullrun_ccd6_acisf13253_pi14-548_cl_pass1_src29.ximg exists
[Sat Apr 21 12:02:33 2012] fullrun_ccd6_acisf13253_pi14-548_cl_pass1_src29_1.ximg exists
[Sat Apr 21 12:02:33 2012] Fit fullrun_ccd6_acisf13253_pi14-548_cl_pass1_src29 appears to have run properly
[Sat Apr 21 12:02:33 2012] fullrun_ccd6_acisf13253_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Sat Apr 21 12:02:33 2012] fullrun_ccd6_acisf13253_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Apr 21 12:02:33 2012] Fit fullrun_ccd6_acisf13253_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Apr 21 13:32:41 2012] Source 40 is offset by 8.003850 and -4.566612 pixels which is larger than
2 X fitted extent = 1.991736 x 9.928496, not incorporating fit results
[Sat Apr 21 13:32:41 2012] Vigneting correction estimate = 1.000000
[Sat Apr 21 13:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 21 13:32:41 2012] Assessing source extent using major
[Sat Apr 21 13:32:41 2012] Source does appear to be extended
[Sat Apr 21 13:32:41 2012] Computing asymmetry using major and minor axis, asym = 2.62
[Sat Apr 21 13:32:41 2012] Source is asymmetric
[Sat Apr 21 13:48:31 2012] Writing source region out to fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40_src.reg
[Sat Apr 21 13:48:31 2012] Extracting stamp from image fullrun_ccd6_acisf13253_pi14-548_cl_sm2.00.img.gz, (646, 934) - (957, 1229)
[Sat Apr 21 13:48:31 2012] Writing fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40.gif
[Sat Apr 21 14:06:14 2012] Size of ../../acisf13253/products/events/fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40_src.evt.gz[events] = 52 counts
[Sat Apr 21 14:06:14 2012] Mean chipx,y = (17.29, 439.35)
[Sat Apr 21 14:06:14 2012] Mean tdetx,y = (2892.29, 2141.35)
[Sat Apr 21 14:06:14 2012] chipx,y range = (3.00-33.00, 404.00-470.00)
[Sat Apr 21 14:06:14 2012] Size of ../../acisf13253/products/events/fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 455 counts
[Sat Apr 21 14:06:15 2012] Not generating rmf since there are only 13 counts
[Sat Apr 21 14:06:15 2012] arf not found, will run specextract
[Sat Apr 21 14:06:45 2012] ../../acisf13253/products/spectra/fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40.warf not found
[Sat Apr 21 14:06:45 2012] ../../acisf13253/products/spectra/fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40.wrmf not found
[Sat Apr 21 14:06:45 2012] Removal of ../../acisf13253/products/spectra/fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40.soff failed
[Sat Apr 21 14:07:53 2012] Spectrum 40 has only 13 counts, deleting rmf
[Sat Apr 21 14:07:53 2012] 92.1987
[Sat Apr 21 14:28:44 2012] Updating aperture counts using extracted products
[Sat Apr 21 14:28:44 2012] Error reading totcts from fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40_src.pi.gz
[Sat Apr 21 14:28:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 21 14:28:44 2012] Using photon index=1.80, rate=0.000114, arf fullrun_ccd6_acisf13253_pi14-548_pass1_cl_src40.arf
[Sat Apr 21 14:28:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Apr 21 14:28:44 2012] Updating source flux to 2.6e-15
[Sat Apr 21 14:29:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting