[Sat Apr 21 04:42:56 2012] Detection parameters:
  Position = (739.7, 134.8) = 15 0 52.05 1 54 53.5
  Extent = 4.2" x 3.6", rotation angle = 124 degrees
  Source counts = 1491.7 +/- 46.6
  Background counts = 675.3
  Rate = 0.01 +/- 0.0004

[Sat Apr 21 04:42:56 2012] Off-axis axis estimate = 10.90'
[Sat Apr 21 06:36:14 2012] Using EEF radius (= 5.28 ")to estimate initial spatial extent for simple fitting
[Sat Apr 21 06:36:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr 21 06:36:14 2012] Initial guess for spatial extent in simple fitting = 5.28"
[Sat Apr 21 06:36:14 2012] source mask rpix=10.7, npix_max = 505, mask sum = 506, frac = 1.002
[Sat Apr 21 06:36:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 5.28"
[Sat Apr 21 06:59:35 2012] fullrun_ccd5_acisf13253_pi14-548_cl_pass0_src1.ximg exists
[Sat Apr 21 06:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13253_pi14-548_cl_pass0_src1.csv
[Sat Apr 21 06:59:35 2012] fullrun_ccd5_acisf13253_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Apr 21 06:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13253_pi14-548_cl_pass0_src1.csv
[Sat Apr 21 06:59:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf13253_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf13253_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 21 06:59:35 2012] fullrun_ccd5_acisf13253_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Apr 21 06:59:35 2012] fullrun_ccd5_acisf13253_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Apr 21 06:59:35 2012] Fit fullrun_ccd5_acisf13253_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Apr 21 09:23:01 2012] Spatial fit model total counts = 2540.000000, observed total counts = 2540.000000
[Sat Apr 21 09:23:01 2012] Offset between fit and detection position for source 5 = 0.693592 pixels
[Sat Apr 21 09:23:01 2012] 2539.995000 total counts/ 701.795000 bgd. counts: snr = 69.388520
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.693592 pixels
  Position = (740.0, 135.4) = 15 0 52.06 1 54 53.5
  Extent = 6.3 (6.1-6.6)", rotation angle = 0
  Source counts = 1838.2 +/- 50.4
  Background counts = 701.8
  Rate = 0.02 +/- 0.0004
[Sat Apr 21 09:23:01 2012] Vigneting correction estimate = 1.000000
[Sat Apr 21 09:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 21 09:23:01 2012] Assessing source extent using major axis lower bound
[Sat Apr 21 09:23:01 2012] Source does appear to be extended
[Sat Apr 21 09:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 21 10:55:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr 21 10:55:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr 21 10:55:40 2012] Initial guess for spatial extent in simple fitting = 6.33"
[Sat Apr 21 10:55:40 2012] source mask rpix=12.9, npix_max = 714, mask sum = 702, frac = 0.982
[Sat Apr 21 10:55:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.33"
[Sat Apr 21 11:20:43 2012] fullrun_ccd5_acisf13253_pi14-548_cl_pass1_src1.ximg exists
[Sat Apr 21 11:20:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13253_pi14-548_cl_pass1_src1.csv
[Sat Apr 21 11:20:43 2012] fullrun_ccd5_acisf13253_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Apr 21 11:20:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13253_pi14-548_cl_pass1_src1.csv
[Sat Apr 21 11:20:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf13253_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf13253_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 21 11:20:43 2012] fullrun_ccd5_acisf13253_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr 21 11:20:43 2012] fullrun_ccd5_acisf13253_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr 21 11:20:43 2012] Fit fullrun_ccd5_acisf13253_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Apr 21 13:32:37 2012] Spatial fit model total counts = 2814.690000, observed total counts = 2818.000000
[Sat Apr 21 13:32:37 2012] Offset between fit and detection position for source 5 = 0.308598 pixels
[Sat Apr 21 13:32:37 2012] 2811.487000 total counts/ 939.697000 bgd. counts: snr = 61.060900
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.308598 pixels
  Position = (740.2, 135.2) = 15 0 52.05 1 54 53.4
  Extent = 6.4 (6.2-6.7)", rotation angle = 0
  Source counts = 1871.8 +/- 53.0
  Background counts = 939.7
  Rate = 0.02 +/- 0.0004
[Sat Apr 21 13:32:37 2012] Vigneting correction estimate = 1.000000
[Sat Apr 21 13:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 21 13:32:37 2012] Assessing source extent using major axis lower bound
[Sat Apr 21 13:32:37 2012] Source does appear to be extended
[Sat Apr 21 13:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 21 13:46:56 2012] Writing source region out to fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5_src.reg
[Sat Apr 21 13:46:56 2012] Extracting stamp from image fullrun_ccd5_acisf13253_pi14-548_cl_sm2.00.img.gz, (447, 0) - (1034, 429)
[Sat Apr 21 13:46:56 2012] Writing fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5.gif
[Sat Apr 21 13:46:59 2012] Size of ../../acisf13253/products/events/fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5_src.evt.gz[events] = 2640 counts
[Sat Apr 21 13:46:59 2012] Mean chipx,y = (960.83, 290.39)
[Sat Apr 21 13:46:59 2012] Mean tdetx,y = (2793.83, 1992.39)
[Sat Apr 21 13:46:59 2012] chipx,y range = (892.00-1023.00, 228.00-359.00)
[Sat Apr 21 13:46:59 2012] Size of ../../acisf13253/products/events/fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 6215 counts
[Sat Apr 21 13:47:00 2012] rmf not found, will run specextract
[Sat Apr 21 13:47:00 2012] arf not found, will run specextract
[Sat Apr 21 13:47:08 2012] ../../acisf13253/products/spectra/fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5.warf not found
[Sat Apr 21 13:47:08 2012] ../../acisf13253/products/spectra/fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5.wrmf not found
[Sat Apr 21 13:47:08 2012] Removal of ../../acisf13253/products/spectra/fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5.soff failed
[Sat Apr 21 13:48:30 2012] Keeping rmf generated by specextract
[Sat Apr 21 13:48:30 2012] 164.792
[Sat Apr 21 14:28:43 2012] Updating aperture counts using extracted products
[Sat Apr 21 14:28:43 2012] Error reading totcts from fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Apr 21 14:28:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 21 14:28:43 2012] Using photon index=1.80, rate=0.0159, arf fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5.arf
[Sat Apr 21 14:28:43 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Apr 21 14:28:43 2012] Updating source flux to 1.5e-13
[Sat Apr 21 14:29:18 2012] Reading fit data from acisf13253/analysis//spectral/fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5_pl.csv
[Sat Apr 21 14:29:18 2012] Spectral fit parameter nH value = 3.23704e+21
[Sat Apr 21 14:29:18 2012] Spectral fit parameter PhoIndex value = 3.96452
[Sat Apr 21 14:29:18 2012] Failed to get F(0.3-8.0) from acisf13253/analysis//spectral/fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sat Apr 21 14:29:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 21 14:29:18 2012] Using Nh = 3.2e+21, photon index=3.96, rate=0.0159, arf fullrun_ccd5_acisf13253_pi14-548_pass1_cl_src5.arf
[Sat Apr 21 14:29:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Apr 21 14:29:18 2012] Updating source flux to 9e-14