[Sat Apr 21 04:42:26 2012] Detection parameters:
  Position = (819.8, 740.8) = 15 1 48.79 1 44 3.5
  Extent = 4.5" x 3.2", rotation angle = 163 degrees
  Source counts = 663.8 +/- 29.0
  Background counts = 175.2
  Rate = 0.006 +/- 0.0002

[Sat Apr 21 04:42:26 2012] Off-axis axis estimate = 10.24'
[Sat Apr 21 05:27:38 2012] Using EEF radius (= 4.65 ")to estimate initial spatial extent for simple fitting
[Sat Apr 21 05:27:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr 21 05:27:38 2012] Initial guess for spatial extent in simple fitting = 4.65"
[Sat Apr 21 05:27:38 2012] source mask rpix=9.5, npix_max = 396, mask sum = 400, frac = 1.010
[Sat Apr 21 05:27:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 4.65"
[Sat Apr 21 06:36:14 2012] fullrun_ccd3_acisf13253_pi14-548_cl_pass0_src1.ximg exists
[Sat Apr 21 06:36:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13253_pi14-548_cl_pass0_src1.csv
[Sat Apr 21 06:36:14 2012] fullrun_ccd3_acisf13253_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Apr 21 06:36:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13253_pi14-548_cl_pass0_src1.csv
[Sat Apr 21 06:36:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13253_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13253_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 21 06:36:14 2012] fullrun_ccd3_acisf13253_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Apr 21 06:36:14 2012] fullrun_ccd3_acisf13253_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Apr 21 06:36:14 2012] Fit fullrun_ccd3_acisf13253_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Apr 21 09:23:00 2012] Spatial fit model total counts = 928.389000, observed total counts = 921.000000
[Sat Apr 21 09:23:00 2012] Offset between fit and detection position for source 3 = 1.169358 pixels
[Sat Apr 21 09:23:00 2012] 929.262000 total counts/ 212.310000 bgd. counts: snr = 49.204504
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.169358 pixels
  Position = (819.1, 741.7) = 15 1 48.83 1 44 3.7
  Extent = 4.3 (4.0-4.6)", rotation angle = 0
  Source counts = 717.0 +/- 30.5
  Background counts = 212.3
  Rate = 0.006 +/- 0.0003
[Sat Apr 21 09:23:00 2012] Vigneting correction estimate = 1.000000
[Sat Apr 21 09:23:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 21 09:23:00 2012] Assessing source extent using major axis lower bound
[Sat Apr 21 09:23:00 2012] Source does appear to be extended
[Sat Apr 21 09:23:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 21 09:59:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr 21 09:59:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr 21 09:59:58 2012] Initial guess for spatial extent in simple fitting = 4.30"
[Sat Apr 21 09:59:58 2012] source mask rpix=8.7, npix_max = 341, mask sum = 342, frac = 1.002
[Sat Apr 21 09:59:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.30"
[Sat Apr 21 10:55:40 2012] fullrun_ccd3_acisf13253_pi14-548_cl_pass1_src1.ximg exists
[Sat Apr 21 10:55:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13253_pi14-548_cl_pass1_src1.csv
[Sat Apr 21 10:55:40 2012] fullrun_ccd3_acisf13253_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Apr 21 10:55:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13253_pi14-548_cl_pass1_src1.csv
[Sat Apr 21 10:55:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13253_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13253_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 21 10:55:40 2012] fullrun_ccd3_acisf13253_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr 21 10:55:40 2012] fullrun_ccd3_acisf13253_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr 21 10:55:40 2012] Fit fullrun_ccd3_acisf13253_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Apr 21 13:32:37 2012] Spatial fit model total counts = 899.003000, observed total counts = 899.000000
[Sat Apr 21 13:32:37 2012] Offset between fit and detection position for source 3 = 0.104930 pixels
[Sat Apr 21 13:32:37 2012] 899.062000 total counts/ 199.934000 bgd. counts: snr = 49.443974
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.104930 pixels
  Position = (819.2, 741.8) = 15 1 48.83 1 44 3.8
  Extent = 4.2 (4.0-4.5)", rotation angle = 0
  Source counts = 699.1 +/- 30.0
  Background counts = 199.9
  Rate = 0.006 +/- 0.0003
[Sat Apr 21 13:32:37 2012] Vigneting correction estimate = 1.000000
[Sat Apr 21 13:32:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 21 13:32:37 2012] Assessing source extent using major axis lower bound
[Sat Apr 21 13:32:37 2012] Source does appear to be extended
[Sat Apr 21 13:32:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 21 13:38:46 2012] Writing source region out to fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3_src.reg
[Sat Apr 21 13:38:46 2012] Extracting stamp from image fullrun_ccd3_acisf13253_pi14-548_cl_sm2.00.img.gz, (625, 548) - (1013, 936)
[Sat Apr 21 13:38:46 2012] Writing fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3.gif
[Sat Apr 21 13:38:48 2012] Size of ../../acisf13253/products/events/fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3_src.evt.gz[events] = 864 counts
[Sat Apr 21 13:38:48 2012] Mean chipx,y = (344.20, 681.84)
[Sat Apr 21 13:38:48 2012] Mean tdetx,y = (4450.16, 3405.20)
[Sat Apr 21 13:38:48 2012] chipx,y range = (300.00-390.00, 635.00-725.00)
[Sat Apr 21 13:38:48 2012] Size of ../../acisf13253/products/events/fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1247 counts
[Sat Apr 21 13:38:49 2012] rmf not found, will run specextract
[Sat Apr 21 13:38:49 2012] arf not found, will run specextract
[Sat Apr 21 13:39:15 2012] ../../acisf13253/products/spectra/fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3.warf not found
[Sat Apr 21 13:39:15 2012] ../../acisf13253/products/spectra/fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3.wrmf not found
[Sat Apr 21 13:39:15 2012] Removal of ../../acisf13253/products/spectra/fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3.soff failed
[Sat Apr 21 13:46:55 2012] Keeping rmf generated by specextract
[Sat Apr 21 13:46:55 2012] 162.561
[Sat Apr 21 14:28:43 2012] Updating aperture counts using extracted products
[Sat Apr 21 14:28:43 2012] Error reading totcts from fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Apr 21 14:28:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 21 14:28:43 2012] Using photon index=1.80, rate=0.00592, arf fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3.arf
[Sat Apr 21 14:28:43 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Apr 21 14:28:43 2012] Updating source flux to 8.2e-14
[Sat Apr 21 14:29:13 2012] Reading fit data from acisf13253/analysis//spectral/fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3_pl.csv
[Sat Apr 21 14:29:13 2012] Spectral fit parameter nH value = 6.22965e+14
[Sat Apr 21 14:29:13 2012] Spectral fit parameter PhoIndex value = 1.95112
[Sat Apr 21 14:29:13 2012] Failed to get F(0.3-8.0) from acisf13253/analysis//spectral/fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Apr 21 14:29:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 21 14:29:13 2012] Using Nh = 6.2e+14, photon index=1.95, rate=0.00592, arf fullrun_ccd3_acisf13253_pi14-548_pass1_cl_src3.arf
[Sat Apr 21 14:29:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Apr 21 14:29:13 2012] Updating source flux to 8.5e-14