[Fri May 31 14:09:53 2013] Detection parameters:
  Position = (289.5, 1009.5) = 13 37 14.64 -29 49 44.6
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 13.3 +/- 3.7
  Background counts = 0.7
  Rate = 0.0002 +/- 7e-05

[Fri May 31 14:09:54 2013] Off-axis axis estimate = 1.49'
[Fri May 31 14:45:39 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri May 31 14:45:39 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Fri May 31 14:45:39 2013] source mask rpix=0.8, npix_max = 6, mask sum = 7, frac = 1.040
[Fri May 31 14:45:39 2013] Giving source the simple spatial ID 99 for pass 0, mean size = 0.39"
[Fri May 31 16:35:25 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src99.ximg exists
[Fri May 31 16:35:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src99.csv
[Fri May 31 16:35:25 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src99_1.ximg exists
[Fri May 31 16:35:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src99.csv
[Fri May 31 16:35:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 16:35:26 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src99.ximg exists
[Fri May 31 16:35:26 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src99_1.ximg exists
[Fri May 31 16:35:26 2013] Fit fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src99 appears to have run properly
[Fri May 31 16:35:44 2013] Spatial fit model total counts = 21.401400, observed total counts = 23.000000
[Fri May 31 16:35:44 2013] Offset between fit and detection position for source 84 = 0.898596 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 84 = 0.898596 pixels
  Position = (289.4, 1010.4) = 13 37 14.66 -29 49 44.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 22.1 +/- 4.7
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Fri May 31 16:35:44 2013] Vigneting correction estimate = 1.000000
[Fri May 31 16:35:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 16:35:44 2013] Assessing source extent using major axis lower bound
[Fri May 31 16:35:44 2013] Source does appear to be extended
[Fri May 31 16:35:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 17:25:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 17:25:55 2013] Initial guess for spatial extent in simple fitting = 0.37"
[Fri May 31 17:25:55 2013] source mask rpix=0.8, npix_max = 6, mask sum = 5, frac = 0.785
[Fri May 31 17:25:55 2013] Giving source the simple spatial ID 75 for pass 1, mean size = 0.37"
[Fri May 31 18:55:24 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src75.ximg exists
[Fri May 31 18:55:24 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src75_1.ximg exists
[Fri May 31 18:55:24 2013] Fit fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src75 appears to have run properly
[Fri May 31 18:55:25 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src75.ximg exists
[Fri May 31 18:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src75.csv
[Fri May 31 18:55:25 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src75_1.ximg exists
[Fri May 31 18:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src75.csv
[Fri May 31 18:55:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:55:39 2013] Spatial fit model total counts = 27.678200, observed total counts = 23.000000
[Fri May 31 18:55:39 2013] Offset between fit and detection position for source 84 = 0.370333 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 84 = 0.370333 pixels
  Position = (289.1, 1010.6) = 13 37 14.67 -29 49 44.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 29.1 +/- 5.4
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
 Deleting source due to low signal-to-noise ratio