[Fri May 31 14:09:52 2013] Detection parameters:
  Position = (658.0, 721.7) = 13 37 0.70 -29 52 6.2
  Extent = 0.5" x 0.5", rotation angle = 130 degrees
  Source counts = 374.3 +/- 21.3
  Background counts = 80.7
  Rate = 0.007 +/- 0.0004

[Fri May 31 14:09:54 2013] Off-axis axis estimate = 2.34'
[Fri May 31 14:45:39 2013] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Fri May 31 14:45:39 2013] Initial guess for spatial extent in simple fitting = 0.47"
[Fri May 31 14:45:39 2013] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.708
[Fri May 31 14:45:39 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 0.47"
[Fri May 31 16:35:25 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src13.ximg exists
[Fri May 31 16:35:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src13.csv
[Fri May 31 16:35:25 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src13_1.ximg exists
[Fri May 31 16:35:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src13.csv
[Fri May 31 16:35:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13248_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 16:35:26 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri May 31 16:35:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src13.csv
[Fri May 31 16:35:26 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 31 16:35:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src13.csv
[Fri May 31 16:35:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13248_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 16:35:44 2013] Spatial fit model total counts = 1080.200000, observed total counts = 1840.000000
[Fri May 31 16:35:44 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 16:35:44 2013] Vigneting correction estimate = 1.000000
[Fri May 31 16:35:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 16:35:44 2013] Assessing source extent using major
[Fri May 31 16:35:44 2013] Source does appear to be extended
[Fri May 31 16:35:44 2013] Computing asymmetry using major and minor axis, asym = 1.07
[Fri May 31 17:25:55 2013] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Fri May 31 17:25:55 2013] Initial guess for spatial extent in simple fitting = 0.47"
[Fri May 31 17:25:55 2013] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.708
[Fri May 31 17:25:55 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 0.47"
[Fri May 31 18:55:23 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src12.ximg exists
[Fri May 31 18:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src12.csv
[Fri May 31 18:55:23 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src12_1.ximg exists
[Fri May 31 18:55:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src12.csv
[Fri May 31 18:55:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13248_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:55:24 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri May 31 18:55:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src12.csv
[Fri May 31 18:55:24 2013] fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May 31 18:55:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src12.csv
[Fri May 31 18:55:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13248_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 18:55:39 2013] Source 12 is offset by 4.158250 and -6.759861 pixels which is larger than
2 X fitted extent = 1.319508 x 1.319508, not incorporating fit results
[Fri May 31 18:55:39 2013] Spatial fit model total counts = 1033.000000, observed total counts = 1840.000000
[Fri May 31 18:55:39 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 18:55:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 18:55:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 18:55:39 2013] Assessing source extent using major
[Fri May 31 18:55:39 2013] Source does appear to be extended
[Fri May 31 18:55:39 2013] Computing asymmetry using major and minor axis, asym = 1.07
[Fri May 31 18:55:39 2013] Source is confused with source 51
[Fri May 31 19:07:42 2013] Writing source region out to fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12_src.reg
[Fri May 31 19:07:42 2013] Extracting stamp from image fullrun_ccd7_acisf13248_pi14-548_cl_sm2.00.img.gz, (634, 698) - (682, 746)
[Fri May 31 19:07:42 2013] Writing fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12.gif
[Fri May 31 19:10:46 2013] Size of ../../acisf13248/products/events/fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12_src.evt.gz[events] = 360 counts
[Fri May 31 19:10:46 2013] Mean chipx,y = (465.82, 526.01)
[Fri May 31 19:10:46 2013] Mean tdetx,y = (4382.82, 2228.01)
[Fri May 31 19:10:46 2013] chipx,y range = (446.00-486.00, 506.00-546.00)
[Fri May 31 19:10:46 2013] Size of ../../acisf13248/products/events/fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 148 counts
[Fri May 31 19:10:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 19:10:48 2013] arf not found, will run specextract
[Fri May 31 19:10:55 2013] ../../acisf13248/products/spectra/fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12.warf not found
[Fri May 31 19:10:55 2013] ../../acisf13248/products/spectra/fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12.wrmf not found
[Fri May 31 19:10:55 2013] Removal of ../../acisf13248/products/spectra/fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12.soff failed
[Fri May 31 19:28:21 2013] Keeping rmf generated by specextract
[Fri May 31 19:28:21 2013] 229.131
[Fri May 31 19:28:29 2013] Updating aperture counts using extracted products
[Fri May 31 19:28:29 2013] Total counts from fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12_src.pi.gz = 360.00
[Fri May 31 19:28:29 2013] Total counts from fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12_bgd.pi.gz = 148.00
[Fri May 31 19:28:29 2013] Got source and background scale factors 0.000001, 0.000002
[Fri May 31 19:28:29 2013] User source parameters:
  Position = (658.0, 721.7) = 13 37 0.70 -29 52 6.2
  Extent = 0.5" x 0.5", rotation angle = 130
  Source aperture counts = 312.1 +/- 20.0
  Background aperture counts = 47.9
  Rate = 0.006 +/- 0.0004

[Fri May 31 19:28:29 2013] Updating counts from extracted products
[Fri May 31 19:28:29 2013] Set source signif. to 312.05/6.92 = 45.06
[Fri May 31 19:28:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 19:28:37 2013] Using photon index=1.80, rate=0.00574, arf fullrun_ccd7_acisf13248_pi14-548_pass1_cl_src12.arf
[Fri May 31 19:28:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 31 19:28:37 2013] Updating source flux to 4.4e-14
[Fri May 31 19:28:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting