[Sat Apr 14 16:42:52 2012] Detection parameters:
  Position = (807.2, 737.8) = 15 1 48.81 1 44 4.0
  Extent = 3.0" x 2.6", rotation angle = 155 degrees
  Source counts = 342.7 +/- 20.4
  Background counts = 73.3
  Rate = 0.008 +/- 0.0005

[Sat Apr 14 16:42:52 2012] Off-axis axis estimate = 10.25'
[Sat Apr 14 17:10:54 2012] Using EEF radius (= 4.65 ")to estimate initial spatial extent for simple fitting
[Sat Apr 14 17:10:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr 14 17:10:54 2012] Initial guess for spatial extent in simple fitting = 4.65"
[Sat Apr 14 17:10:54 2012] source mask rpix=9.5, npix_max = 396, mask sum = 400, frac = 1.008
[Sat Apr 14 17:10:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 4.65"
[Sat Apr 14 17:38:10 2012] fullrun_ccd3_acisf13246_pi14-548_cl_pass0_src1.ximg exists
[Sat Apr 14 17:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13246_pi14-548_cl_pass0_src1.csv
[Sat Apr 14 17:38:10 2012] fullrun_ccd3_acisf13246_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Apr 14 17:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13246_pi14-548_cl_pass0_src1.csv
[Sat Apr 14 17:38:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13246_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13246_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 14 17:38:10 2012] fullrun_ccd3_acisf13246_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Apr 14 17:38:10 2012] fullrun_ccd3_acisf13246_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Apr 14 17:38:10 2012] Fit fullrun_ccd3_acisf13246_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Apr 14 19:00:03 2012] Spatial fit model total counts = 454.001000, observed total counts = 454.000000
[Sat Apr 14 19:00:03 2012] Offset between fit and detection position for source 10 = 0.424684 pixels
[Sat Apr 14 19:00:03 2012] 454.092300 total counts/ 87.004300 bgd. counts: snr = 39.354992
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.424684 pixels
  Position = (807.5, 738.1) = 15 1 48.81 1 44 3.9
  Extent = 4.3 (4.0-4.5)", rotation angle = 0
  Source counts = 367.1 +/- 21.3
  Background counts = 87.0
  Rate = 0.008 +/- 0.0005
[Sat Apr 14 19:00:03 2012] Vigneting correction estimate = 1.000000
[Sat Apr 14 19:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 14 19:00:03 2012] Assessing source extent using major axis lower bound
[Sat Apr 14 19:00:03 2012] Source does appear to be extended
[Sat Apr 14 19:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 14 19:19:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr 14 19:19:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr 14 19:19:03 2012] Initial guess for spatial extent in simple fitting = 4.30"
[Sat Apr 14 19:19:03 2012] source mask rpix=8.7, npix_max = 341, mask sum = 342, frac = 1.000
[Sat Apr 14 19:19:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.30"
[Sat Apr 14 19:38:52 2012] fullrun_ccd3_acisf13246_pi14-548_cl_pass1_src1.ximg exists
[Sat Apr 14 19:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13246_pi14-548_cl_pass1_src1.csv
[Sat Apr 14 19:38:52 2012] fullrun_ccd3_acisf13246_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Apr 14 19:38:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13246_pi14-548_cl_pass1_src1.csv
[Sat Apr 14 19:38:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13246_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13246_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 14 19:38:52 2012] fullrun_ccd3_acisf13246_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr 14 19:38:52 2012] fullrun_ccd3_acisf13246_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr 14 19:38:52 2012] Fit fullrun_ccd3_acisf13246_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Apr 14 20:43:40 2012] Spatial fit model total counts = 443.000000, observed total counts = 443.000000
[Sat Apr 14 20:43:40 2012] Offset between fit and detection position for source 10 = 0.097887 pixels
[Sat Apr 14 20:43:40 2012] 442.861900 total counts/ 78.405900 bgd. counts: snr = 41.159561
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.097887 pixels
  Position = (807.6, 738.1) = 15 1 48.81 1 44 3.9
  Extent = 4.3 (3.9-4.6)", rotation angle = 0
  Source counts = 364.5 +/- 21.0
  Background counts = 78.4
  Rate = 0.008 +/- 0.0005
[Sat Apr 14 20:43:40 2012] Vigneting correction estimate = 1.000000
[Sat Apr 14 20:43:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 14 20:43:40 2012] Assessing source extent using major axis lower bound
[Sat Apr 14 20:43:40 2012] Source does appear to be extended
[Sat Apr 14 20:43:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 14 20:47:21 2012] Writing source region out to fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10_src.reg
[Sat Apr 14 20:47:21 2012] Extracting stamp from image fullrun_ccd3_acisf13246_pi14-548_cl_sm2.00.img.gz, (612, 543) - (1003, 933)
[Sat Apr 14 20:47:21 2012] Writing fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10.gif
[Sat Apr 14 20:47:23 2012] Size of ../../acisf13246/products/events/fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10_src.evt.gz[events] = 432 counts
[Sat Apr 14 20:47:23 2012] Mean chipx,y = (346.00, 679.90)
[Sat Apr 14 20:47:23 2012] Mean tdetx,y = (4452.10, 3407.00)
[Sat Apr 14 20:47:23 2012] chipx,y range = (301.00-390.00, 635.00-728.00)
[Sat Apr 14 20:47:23 2012] Size of ../../acisf13246/products/events/fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 472 counts
[Sat Apr 14 20:47:24 2012] rmf not found, will run specextract
[Sat Apr 14 20:47:24 2012] arf not found, will run specextract
[Sat Apr 14 20:47:50 2012] ../../acisf13246/products/spectra/fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10.warf not found
[Sat Apr 14 20:47:50 2012] ../../acisf13246/products/spectra/fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10.wrmf not found
[Sat Apr 14 20:47:50 2012] Removal of ../../acisf13246/products/spectra/fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10.soff failed
[Sat Apr 14 20:51:36 2012] Keeping rmf generated by specextract
[Sat Apr 14 20:51:36 2012] 162.423
[Sat Apr 14 21:12:26 2012] Updating aperture counts using extracted products
[Sat Apr 14 21:12:26 2012] Error reading totcts from fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Apr 14 21:12:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 14 21:12:26 2012] Using photon index=1.80, rate=0.0081, arf fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10.arf
[Sat Apr 14 21:12:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Apr 14 21:12:26 2012] Updating source flux to 1.1e-13
[Sat Apr 14 21:12:40 2012] Reading fit data from acisf13246/analysis//spectral/fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10_pl.csv
[Sat Apr 14 21:12:40 2012] Spectral fit parameter nH value = 3.54575e+13
[Sat Apr 14 21:12:40 2012] Spectral fit parameter PhoIndex value = 1.93882
[Sat Apr 14 21:12:40 2012] Failed to get F(0.3-8.0) from acisf13246/analysis//spectral/fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Sat Apr 14 21:12:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 14 21:12:40 2012] Using Nh = 3.5e+13, photon index=1.94, rate=0.0081, arf fullrun_ccd3_acisf13246_pi14-548_pass1_cl_src10.arf
[Sat Apr 14 21:12:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Apr 14 21:12:40 2012] Updating source flux to 1.2e-13