[Sun May 12 06:02:42 2013] Detection parameters:
  Position = (680.4, 772.1) = 13 47 27.62 17 25 44.5
  Extent = 0.5" x 0.5", rotation angle = 24 degrees
  Source counts = 15.9 +/- 4.0
  Background counts = 0.1
  Rate = 0.003 +/- 0.0008

[Sun May 12 06:02:42 2013] Off-axis axis estimate = 3.62'
[Sun May 12 06:11:37 2013] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:11:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 06:11:37 2013] Initial guess for spatial extent in simple fitting = 0.72"
[Sun May 12 06:11:37 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.029
[Sun May 12 06:11:37 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.72"
[Sun May 12 06:15:06 2013] fullrun_ccd3_acisf13233_pi14-548_cl_pass0_src2.ximg exists
[Sun May 12 06:15:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13233_pi14-548_cl_pass0_src2.csv
[Sun May 12 06:15:06 2013] fullrun_ccd3_acisf13233_pi14-548_cl_pass0_src2_1.ximg exists
[Sun May 12 06:15:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13233_pi14-548_cl_pass0_src2.csv
[Sun May 12 06:15:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13233_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13233_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:15:06 2013] fullrun_ccd3_acisf13233_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sun May 12 06:15:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13233_pi14-548_cl_pass0_tfrozen_src2.csv
[Sun May 12 06:15:06 2013] fullrun_ccd3_acisf13233_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 12 06:15:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13233_pi14-548_cl_pass0_tfrozen_src2.csv
[Sun May 12 06:15:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13233_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13233_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:39:23 2013] Spatial fit model total counts = 15.379600, observed total counts = 17.000000
[Sun May 12 06:39:23 2013] Offset between fit and detection position for source 2 = 0.768092 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.768092 pixels
  Position = (681.0, 772.6) = 13 47 27.62 17 25 44.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 15.2 +/- 3.9
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Sun May 12 06:39:23 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:39:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:39:23 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:39:23 2013] Source does appear to be extended
[Sun May 12 06:39:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:44:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 06:44:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 06:44:47 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Sun May 12 06:44:47 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.172
[Sun May 12 06:44:47 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.54"
[Sun May 12 06:48:21 2013] fullrun_ccd3_acisf13233_pi14-548_cl_pass1_src2.ximg exists
[Sun May 12 06:48:21 2013] fullrun_ccd3_acisf13233_pi14-548_cl_pass1_src2_1.ximg exists
[Sun May 12 06:48:21 2013] Fit fullrun_ccd3_acisf13233_pi14-548_cl_pass1_src2 appears to have run properly
[Sun May 12 06:48:21 2013] fullrun_ccd3_acisf13233_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sun May 12 06:48:21 2013] fullrun_ccd3_acisf13233_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 12 06:48:21 2013] Fit fullrun_ccd3_acisf13233_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sun May 12 06:57:24 2013] Spatial fit model total counts = 16.103700, observed total counts = 17.000000
[Sun May 12 06:57:24 2013] Offset between fit and detection position for source 2 = 0.060364 pixels
[Sun May 12 06:57:24 2013] 15.850300 total counts/ 0.000000 bgd. counts: snr = 177169889875459.437500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.060364 pixels
  Position = (681.0, 772.6) = 13 47 27.62 17 25 44.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 15.9 +/- 4.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Sun May 12 06:57:24 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:57:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:57:24 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:57:24 2013] Source does appear to be extended
[Sun May 12 06:57:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 07:01:15 2013] Writing source region out to fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2_src.reg
[Sun May 12 07:01:15 2013] Extracting stamp from image fullrun_ccd3_acisf13233_pi14-548_cl_sm2.00.img.gz, (657, 749) - (704, 796)
[Sun May 12 07:01:15 2013] Writing fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2.gif
[Sun May 12 07:01:54 2013] Size of ../../acisf13233/products/events/fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2_src.evt.gz[events] = 16 counts
[Sun May 12 07:01:54 2013] Mean chipx,y = (737.88, 627.69)
[Sun May 12 07:01:54 2013] Mean tdetx,y = (4504.31, 3798.88)
[Sun May 12 07:01:54 2013] chipx,y range = (726.00-757.00, 614.00-648.00)
[Sun May 12 07:01:54 2013] Size of ../../acisf13233/products/events/fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1 counts
[Sun May 12 07:01:55 2013] Not generating rmf since there are only 15 counts
[Sun May 12 07:01:55 2013] arf not found, will run specextract
[Sun May 12 07:02:20 2013] ../../acisf13233/products/spectra/fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2.warf not found
[Sun May 12 07:02:20 2013] ../../acisf13233/products/spectra/fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2.wrmf not found
[Sun May 12 07:02:20 2013] Removal of ../../acisf13233/products/spectra/fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2.soff failed
[Sun May 12 07:04:53 2013] Spectrum 2 has only 16 counts, deleting rmf
[Sun May 12 07:04:53 2013] 192.804
[Sun May 12 07:05:52 2013] Updating aperture counts using extracted products
[Sun May 12 07:05:52 2013] Total counts from fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2_src.pi.gz = 16.00
[Sun May 12 07:05:52 2013] Total counts from fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2_bgd.pi.gz = 1.00
[Sun May 12 07:05:52 2013] Got source and background scale factors 0.000001, 0.000010
[Sun May 12 07:05:52 2013] User source parameters:
  Position = (681.0, 772.6) = 13 47 27.62 17 25 44.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source aperture counts = 15.9 +/- 5.1
  Background aperture counts = 0.1
  Rate = 0.003 +/- 0.001

[Sun May 12 07:05:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 07:05:53 2013] Using photon index=1.80, rate=0.00323, arf fullrun_ccd3_acisf13233_pi14-548_pass1_cl_src2.arf
[Sun May 12 07:05:53 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 07:05:53 2013] Updating source flux to 4e-14
[Sun May 12 07:06:01 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting