[Fri May 17 02:17:33 2013] Detection parameters:
  Position = (846.9, 855.6) = 5 16 37.90 -51 57 34.6
  Extent = 0.6" x 0.5", rotation angle = 149 degrees
  Source counts = 19.2 +/- 4.7
  Background counts = 2.8
  Rate = 0.0006 +/- 0.0001

[Fri May 17 02:17:33 2013] Off-axis axis estimate = 4.39'
[Fri May 17 05:50:42 2013] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Fri May 17 05:50:42 2013] Initial guess for spatial extent in simple fitting = 0.96"
[Fri May 17 05:50:42 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Fri May 17 05:50:42 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 0.96"
[Fri May 17 06:05:38 2013] fullrun_ccd7_acisf13214_pi14-548_cl_pass0_src9.ximg exists
[Fri May 17 06:05:38 2013] fullrun_ccd7_acisf13214_pi14-548_cl_pass0_src9_1.ximg exists
[Fri May 17 06:05:38 2013] Fit fullrun_ccd7_acisf13214_pi14-548_cl_pass0_src9 appears to have run properly
[Fri May 17 06:05:38 2013] fullrun_ccd7_acisf13214_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri May 17 06:05:38 2013] fullrun_ccd7_acisf13214_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri May 17 06:05:38 2013] Fit fullrun_ccd7_acisf13214_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri May 17 06:05:47 2013] Spatial fit model total counts = 24.369300, observed total counts = 26.000000
[Fri May 17 06:05:47 2013] Offset between fit and detection position for source 18 = 0.860199 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.860199 pixels
  Position = (847.4, 856.3) = 5 16 37.90 -51 57 34.5
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 22.8 +/- 4.8
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Fri May 17 06:05:47 2013] Vigneting correction estimate = 1.000000
[Fri May 17 06:05:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 06:05:47 2013] Assessing source extent using major axis lower bound
[Fri May 17 06:05:47 2013] Source does appear to be extended
[Fri May 17 06:05:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 09:41:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 09:41:55 2013] Initial guess for spatial extent in simple fitting = 0.96"
[Fri May 17 09:41:55 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Fri May 17 09:41:55 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 0.96"
[Fri May 17 09:56:45 2013] fullrun_ccd7_acisf13214_pi14-548_cl_pass1_src9.ximg exists
[Fri May 17 09:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13214_pi14-548_cl_pass1_src9.csv
[Fri May 17 09:56:45 2013] fullrun_ccd7_acisf13214_pi14-548_cl_pass1_src9_1.ximg exists
[Fri May 17 09:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13214_pi14-548_cl_pass1_src9.csv
[Fri May 17 09:56:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13214_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13214_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 09:56:45 2013] fullrun_ccd7_acisf13214_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri May 17 09:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13214_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri May 17 09:56:45 2013] fullrun_ccd7_acisf13214_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri May 17 09:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13214_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri May 17 09:56:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13214_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13214_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 09:56:53 2013] Spatial fit model total counts = 23.636400, observed total counts = 26.000000
[Fri May 17 09:56:53 2013] Offset between fit and detection position for source 18 = 0.023892 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.023892 pixels
  Position = (847.4, 856.3) = 5 16 37.90 -51 57 34.5
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 22.0 +/- 4.7
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri May 17 09:56:53 2013] Vigneting correction estimate = 1.000000
[Fri May 17 09:56:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 09:56:53 2013] Assessing source extent using major axis lower bound
[Fri May 17 09:56:53 2013] Source does appear to be extended
[Fri May 17 09:56:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 10:09:39 2013] Writing source region out to fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18_src.reg
[Fri May 17 10:09:39 2013] Extracting stamp from image fullrun_ccd7_acisf13214_pi14-548_cl_sm2.00.img.gz, (802, 811) - (893, 901)
[Fri May 17 10:09:39 2013] Writing fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18.gif
[Fri May 17 10:12:00 2013] Size of ../../acisf13214/products/events/fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18_src.evt.gz[events] = 24 counts
[Fri May 17 10:12:00 2013] Mean chipx,y = (715.96, 428.25)
[Fri May 17 10:12:00 2013] Mean tdetx,y = (4632.96, 2130.25)
[Fri May 17 10:12:00 2013] chipx,y range = (694.00-737.00, 406.00-446.00)
[Fri May 17 10:12:00 2013] Size of ../../acisf13214/products/events/fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 64 counts
[Fri May 17 10:12:02 2013] Not generating rmf since there are only 22 counts
[Fri May 17 10:12:02 2013] arf not found, will run specextract
[Fri May 17 10:12:09 2013] ../../acisf13214/products/spectra/fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18.warf not found
[Fri May 17 10:12:09 2013] ../../acisf13214/products/spectra/fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18.wrmf not found
[Fri May 17 10:12:09 2013] Removal of ../../acisf13214/products/spectra/fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18.soff failed
[Fri May 17 10:15:28 2013] Spectrum 18 has only 22 counts, deleting rmf
[Fri May 17 10:15:28 2013] 222.257
[Fri May 17 10:15:34 2013] Updating aperture counts using extracted products
[Fri May 17 10:15:34 2013] Total counts from fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18_src.pi.gz = 24.00
[Fri May 17 10:15:34 2013] Total counts from fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18_bgd.pi.gz = 64.00
[Fri May 17 10:15:34 2013] Got source and background scale factors 0.000003, 0.000036
[Fri May 17 10:15:34 2013] User source parameters:
  Position = (847.4, 856.3) = 5 16 37.90 -51 57 34.5
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source aperture counts = 18.6 +/- 6.0
  Background aperture counts = 5.4
  Rate = 0.0005 +/- 0.0002

[Fri May 17 10:15:36 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 10:15:36 2013] Using photon index=1.80, rate=0.000636, arf fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18.arf
[Fri May 17 10:15:36 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 17 10:15:36 2013] Updating source flux to 4.9e-15
[Fri May 17 10:15:52 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 17 10:15:53 2013] acisf13214/analysis//spectral/fullrun_ccd7_acisf13214_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete