[Fri Oct 21 21:47:52 2011] Detection parameters:
  Position = (159.4, 193.5) = 5 34 31.13 22 1 10.0
  Extent = 0.7" x 0.7", rotation angle = 157 degrees
  Source counts = 5281.8 +/- 135.1
  Background counts = 12959.2
  Rate = 9 +/- 0.2

[Fri Oct 21 21:47:55 2011] Off-axis axis estimate = 0.28'
[Fri Oct 21 21:58:51 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 21:58:51 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Oct 21 21:58:51 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.283
[Fri Oct 21 21:58:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Fri Oct 21 23:39:31 2011] fullrun_ccd7_acisf13209_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 23:39:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13209_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 23:39:31 2011] fullrun_ccd7_acisf13209_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 23:39:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13209_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 23:39:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13209_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13209_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 23:39:31 2011] fullrun_ccd7_acisf13209_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 23:39:31 2011] fullrun_ccd7_acisf13209_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 23:39:31 2011] Fit fullrun_ccd7_acisf13209_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 23:39:51 2011] Spatial fit model total counts = 21694.300000, observed total counts = 21676.000000
[Fri Oct 21 23:39:51 2011] Offset between fit and detection position for source 1 = 4.188675 pixels
[Fri Oct 21 23:39:51 2011] 21695.423000 total counts/ 20774.500000 bgd. counts: snr = 6.389370
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.188675 pixels
  Position = (155.7, 195.4) = 5 34 31.28 22 1 10.7
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 920.9 +/- 147.3
  Background counts = 20774.5
  Rate = 2 +/- 0.3
[Fri Oct 21 23:39:51 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 23:39:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 23:39:51 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 23:39:51 2011] Source does appear to be extended
[Fri Oct 21 23:39:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 23:40:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 23:40:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 23:40:08 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct 21 23:40:08 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Fri Oct 21 23:40:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Sat Oct 22 02:31:31 2011] fullrun_ccd7_acisf13209_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 02:31:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13209_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 02:31:31 2011] fullrun_ccd7_acisf13209_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 02:31:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13209_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 02:31:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13209_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13209_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 02:31:32 2011] fullrun_ccd7_acisf13209_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 02:31:32 2011] fullrun_ccd7_acisf13209_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 02:31:32 2011] Fit fullrun_ccd7_acisf13209_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 02:31:50 2011] Spatial fit model total counts = 47157.100000, observed total counts = 47150.000000
[Sat Oct 22 02:31:50 2011] Offset between fit and detection position for source 1 = 1.636267 pixels
[Sat Oct 22 02:31:50 2011] 46519.000000 total counts/ 43325.800000 bgd. counts: snr = 15.340970
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.636267 pixels
  Position = (154.5, 196.4) = 5 34 31.33 22 1 11.2
  Extent = 3.0 (2.9-3.0)", rotation angle = 0
  Source counts = 3193.2 +/- 215.7
  Background counts = 43325.8
  Rate = 5 +/- 0.4
[Sat Oct 22 02:31:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 02:31:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 02:31:50 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 02:31:50 2011] Source does appear to be extended
[Sat Oct 22 02:31:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 02:31:50 2011] Source is confused with source 15
[Sat Oct 22 02:31:50 2011] Source is confused with source 29
[Sat Oct 22 02:31:50 2011] Source is confused with source 38
[Sat Oct 22 02:32:06 2011] Writing source region out to fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 02:32:06 2011] Extracting stamp from image fullrun_ccd7_acisf13209_pi14-548_cl_sm2.00.img.gz, (20, 62) - (289, 315)
[Sat Oct 22 02:32:06 2011] Writing fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 02:32:35 2011] Size of ../../acisf13209/products/events/fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1_src.evt.gz[events] = 139403 counts
[Sat Oct 22 02:32:35 2011] Mean chipx,y = (177.13, 299.37)
[Sat Oct 22 02:32:35 2011] Mean tdetx,y = (4094.13, 2001.37)
[Sat Oct 22 02:32:35 2011] chipx,y range = (151.00-203.00, 273.00-326.00)
[Sat Oct 22 02:32:35 2011] Size of ../../acisf13209/products/events/fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 115618 counts
[Sat Oct 22 02:32:36 2011] rmf not found, will run specextract
[Sat Oct 22 02:32:36 2011] arf not found, will run specextract
[Sat Oct 22 02:33:03 2011] ../../acisf13209/products/spectra/fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1.warf not found
[Sat Oct 22 02:33:03 2011] ../../acisf13209/products/spectra/fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1.wrmf not found
[Sat Oct 22 02:33:03 2011] Removal of ../../acisf13209/products/spectra/fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1.soff failed
[Sat Oct 22 03:11:28 2011] Keeping rmf generated by specextract
[Sat Oct 22 03:11:28 2011] 234.407
[Sat Oct 22 03:11:33 2011] Updating aperture counts using extracted products
[Sat Oct 22 03:11:33 2011] Error reading totcts from fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 22 03:11:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 03:11:35 2011] Using photon index=1.80, rate=5.47, arf fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 03:11:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 03:11:35 2011] Updating source flux to 4.8e-11
[Sat Oct 22 03:11:41 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Oct 22 03:20:40 2011] Reading fit data from acisf13209/analysis//spectral/fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 22 03:20:40 2011] Spectral fit parameter nH value = 3.40645e+21
[Sat Oct 22 03:20:40 2011] Spectral fit parameter PhoIndex value = 1.52521
[Sat Oct 22 03:20:40 2011] Failed to get F(0.3-8.0) from acisf13209/analysis//spectral/fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 22 03:20:40 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 03:20:40 2011] Using Nh = 3.4e+21, photon index=1.53, rate=5.47, arf fullrun_ccd7_acisf13209_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 03:20:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 03:20:40 2011] Updating source flux to 5.7e-11