[Mon Oct 24 22:07:54 2011] Detection parameters:
  Position = (86.7, 79.5) = 5 34 34.82 22 0 10.4
  Extent = 0.7" x 0.7", rotation angle = 129 degrees
  Source counts = 1741.2 +/- 50.7
  Background counts = 824.8
  Rate = 3 +/- 0.09

[Mon Oct 24 22:08:01 2011] Off-axis axis estimate = 1.00'
[Mon Oct 24 22:11:59 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:11:59 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 24 22:11:59 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.390
[Mon Oct 24 22:11:59 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 0.38"
[Mon Oct 24 22:12:02 2011] fullrun_ccd7_acisf13205_pi14-548_cl_pass0_src41.ximg exists
[Mon Oct 24 22:12:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13205_pi14-548_cl_pass0_src41.csv
[Mon Oct 24 22:12:02 2011] fullrun_ccd7_acisf13205_pi14-548_cl_pass0_src41_1.ximg exists
[Mon Oct 24 22:12:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13205_pi14-548_cl_pass0_src41.csv
[Mon Oct 24 22:12:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13205_pi14-548_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13205_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:12:04 2011] fullrun_ccd7_acisf13205_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Mon Oct 24 22:12:04 2011] fullrun_ccd7_acisf13205_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Oct 24 22:12:04 2011] Fit fullrun_ccd7_acisf13205_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly
[Mon Oct 24 22:12:26 2011] Spatial fit model total counts = 3052.290000, observed total counts = 3053.000000
[Mon Oct 24 22:12:26 2011] Offset between fit and detection position for source 41 = 1.812026 pixels
[Mon Oct 24 22:12:26 2011] 3117.421000 total counts/ 2834.830000 bgd. counts: snr = 5.307559
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.812026 pixels
  Position = (88.5, 79.5) = 5 34 34.77 22 0 10.2
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 282.6 +/- 55.8
  Background counts = 2834.8
  Rate = 0.5 +/- 0.1
[Mon Oct 24 22:12:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:12:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:12:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:12:27 2011] Source does appear to be extended
[Mon Oct 24 22:12:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:12:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:12:45 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Oct 24 22:12:45 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Mon Oct 24 22:12:45 2011] Giving source the simple spatial ID 40 for pass 1, mean size = 1.50"
[Mon Oct 24 22:12:48 2011] fullrun_ccd7_acisf13205_pi14-548_cl_pass1_src40.ximg exists
[Mon Oct 24 22:12:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13205_pi14-548_cl_pass1_src40.csv
[Mon Oct 24 22:12:48 2011] fullrun_ccd7_acisf13205_pi14-548_cl_pass1_src40_1.ximg exists
[Mon Oct 24 22:12:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13205_pi14-548_cl_pass1_src40.csv
[Mon Oct 24 22:12:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13205_pi14-548_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13205_pi14-548_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:12:52 2011] fullrun_ccd7_acisf13205_pi14-548_cl_pass1_tfrozen_src40.ximg exists
[Mon Oct 24 22:12:52 2011] fullrun_ccd7_acisf13205_pi14-548_cl_pass1_tfrozen_src40_1.ximg exists
[Mon Oct 24 22:12:52 2011] Fit fullrun_ccd7_acisf13205_pi14-548_cl_pass1_tfrozen_src40 appears to have run properly
[Mon Oct 24 22:13:14 2011] Spatial fit model total counts = 4324.370000, observed total counts = 4330.000000
[Mon Oct 24 22:13:14 2011] Offset between fit and detection position for source 41 = 1.325870 pixels
[Mon Oct 24 22:13:14 2011] Warning, changing simple spatial fit ID from 40 to 8
[Mon Oct 24 22:13:14 2011] 4471.078500 total counts/ 4457.950000 bgd. counts: snr = 0.196629
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.325870 pixels
  Position = (88.7, 80.8) = 5 34 34.77 22 0 10.8
  Extent = 0.4" x 0.4", rotation angle = 0
  Source counts = 13.1 +/- 66.9
  Background counts = 4457.9
  Rate = 0.02 +/- 0.1
  Deleting source due to low Poisson probability