[Thu Jan 19 21:29:25 2012] Detection parameters:
  Position = (927.8, 1153.0) = 8 30 59.44 65 50 21.0
  Extent = 0.8" x 0.5", rotation angle = 96 degrees
  Source counts = 15.6 +/- 6.4
  Background counts = 25.4
  Rate = 0.0003 +/- 0.0001

[Thu Jan 19 21:29:25 2012] Off-axis axis estimate = 0.84'
[Thu Jan 19 22:57:26 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 22:57:26 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Jan 19 22:57:26 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.615
[Thu Jan 19 22:57:26 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.38"
[Thu Jan 19 23:17:03 2012] fullrun_ccd3_acisf13201_pi14-548_cl_pass0_src11.ximg exists
[Thu Jan 19 23:17:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13201_pi14-548_cl_pass0_src11.csv
[Thu Jan 19 23:17:03 2012] fullrun_ccd3_acisf13201_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Jan 19 23:17:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13201_pi14-548_cl_pass0_src11.csv
[Thu Jan 19 23:17:03 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13201_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13201_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 23:17:03 2012] fullrun_ccd3_acisf13201_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Jan 19 23:17:03 2012] fullrun_ccd3_acisf13201_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jan 19 23:17:03 2012] Fit fullrun_ccd3_acisf13201_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jan 19 23:30:44 2012] Source 17 is offset by 2.717969 and -3.487773 pixels which is larger than
2 X fitted extent = 0.404025 x 0.404025, not incorporating fit results
[Thu Jan 19 23:30:44 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 23:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 23:30:44 2012] Assessing source extent using major
[Thu Jan 19 23:30:44 2012] Source does appear to be extended
[Thu Jan 19 23:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.56
[Thu Jan 19 23:30:44 2012] Source is asymmetric
[Fri Jan 20 00:48:44 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Jan 20 00:48:44 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Jan 20 00:48:44 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.615
[Fri Jan 20 00:48:44 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.38"
[Fri Jan 20 01:04:53 2012] fullrun_ccd3_acisf13201_pi14-548_cl_pass1_src11.ximg exists
[Fri Jan 20 01:04:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13201_pi14-548_cl_pass1_src11.csv
[Fri Jan 20 01:04:53 2012] fullrun_ccd3_acisf13201_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Jan 20 01:04:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13201_pi14-548_cl_pass1_src11.csv
[Fri Jan 20 01:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13201_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13201_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 20 01:04:53 2012] fullrun_ccd3_acisf13201_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Jan 20 01:04:53 2012] fullrun_ccd3_acisf13201_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jan 20 01:04:53 2012] Fit fullrun_ccd3_acisf13201_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jan 20 01:13:47 2012] Source 17 is offset by 2.887481 and -3.488362 pixels which is larger than
2 X fitted extent = 0.404307 x 0.404307, not incorporating fit results
[Fri Jan 20 01:13:47 2012] Vigneting correction estimate = 1.000000
[Fri Jan 20 01:13:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 20 01:13:47 2012] Assessing source extent using major
[Fri Jan 20 01:13:47 2012] Source does appear to be extended
[Fri Jan 20 01:13:47 2012] Computing asymmetry using major and minor axis, asym = 1.56
[Fri Jan 20 01:13:47 2012] Source is asymmetric
[Fri Jan 20 01:46:46 2012] Writing source region out to fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17_src.reg
[Fri Jan 20 01:46:46 2012] Extracting stamp from image fullrun_ccd3_acisf13201_pi14-548_cl_sm2.00.img.gz, (893, 1118) - (963, 1188)
[Fri Jan 20 01:46:46 2012] Writing fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17.gif
[Fri Jan 20 01:53:26 2012] Size of ../../acisf13201/products/events/fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17_src.evt.gz[events] = 80 counts
[Fri Jan 20 01:53:26 2012] Mean chipx,y = (817.77, 932.50)
[Fri Jan 20 01:53:26 2012] Mean tdetx,y = (4199.50, 3878.78)
[Fri Jan 20 01:53:26 2012] chipx,y range = (797.00-842.00, 913.00-952.00)
[Fri Jan 20 01:53:27 2012] Size of ../../acisf13201/products/events/fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 1248 counts
[Fri Jan 20 01:53:28 2012] Not generating rmf since there are only 15 counts
[Fri Jan 20 01:53:28 2012] arf not found, will run specextract
[Fri Jan 20 01:53:56 2012] ../../acisf13201/products/spectra/fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17.warf not found
[Fri Jan 20 01:53:56 2012] ../../acisf13201/products/spectra/fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17.wrmf not found
[Fri Jan 20 01:53:56 2012] Removal of ../../acisf13201/products/spectra/fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17.soff failed
[Fri Jan 20 01:54:43 2012] Spectrum 17 has only 16 counts, deleting rmf
[Fri Jan 20 01:54:43 2012] 201.747
[Fri Jan 20 01:55:27 2012] Updating aperture counts using extracted products
[Fri Jan 20 01:55:27 2012] Error reading totcts from fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17_src.pi.gz
[Fri Jan 20 01:55:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 20 01:55:27 2012] Using photon index=1.80, rate=0.000319, arf fullrun_ccd3_acisf13201_pi14-548_pass1_cl_src17.arf
[Fri Jan 20 01:55:27 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jan 20 01:55:27 2012] Updating source flux to 3.7e-15
[Fri Jan 20 01:55:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting