[Thu Jan 19 21:28:52 2012] Detection parameters:
  Position = (527.6, 169.4) = 8 30 17.40 65 46 5.6
  Extent = 2.1" x 1.1", rotation angle = 6 degrees
  Source counts = 123.9 +/- 11.6
  Background counts = 11.1
  Rate = 0.003 +/- 0.0002

[Thu Jan 19 21:28:53 2012] Off-axis axis estimate = 6.01'
[Thu Jan 19 22:29:28 2012] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 22:29:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 22:29:28 2012] Initial guess for spatial extent in simple fitting = 1.64"
[Thu Jan 19 22:29:28 2012] source mask rpix=3.3, npix_max = 58, mask sum = 49, frac = 0.836
[Thu Jan 19 22:29:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.64"
[Thu Jan 19 22:57:26 2012] fullrun_ccd2_acisf13201_pi14-548_cl_pass0_src1.ximg exists
[Thu Jan 19 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13201_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 22:57:26 2012] fullrun_ccd2_acisf13201_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jan 19 22:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13201_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 22:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13201_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13201_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 22:57:26 2012] fullrun_ccd2_acisf13201_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 19 22:57:26 2012] fullrun_ccd2_acisf13201_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 19 22:57:26 2012] Fit fullrun_ccd2_acisf13201_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 19 23:30:42 2012] Spatial fit model total counts = 131.435000, observed total counts = 131.000000
[Thu Jan 19 23:30:42 2012] Offset between fit and detection position for source 25 = 1.588372 pixels
[Thu Jan 19 23:30:42 2012] 131.370400 total counts/ 23.130400 bgd. counts: snr = 22.505891
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.588372 pixels
  Position = (529.2, 169.8) = 8 30 17.32 65 46 5.6
  Extent = 1.4 (1.2-1.7)", rotation angle = 0
  Source counts = 108.2 +/- 11.5
  Background counts = 23.1
  Rate = 0.002 +/- 0.0002
[Thu Jan 19 23:30:42 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 23:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 23:30:42 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 23:30:42 2012] Source does appear to be extended
[Thu Jan 19 23:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 20 00:25:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan 20 00:25:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan 20 00:25:13 2012] Initial guess for spatial extent in simple fitting = 1.42"
[Fri Jan 20 00:25:13 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.063
[Fri Jan 20 00:25:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.42"
[Fri Jan 20 00:48:43 2012] fullrun_ccd2_acisf13201_pi14-548_cl_pass1_src1.ximg exists
[Fri Jan 20 00:48:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13201_pi14-548_cl_pass1_src1.csv
[Fri Jan 20 00:48:43 2012] fullrun_ccd2_acisf13201_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Jan 20 00:48:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13201_pi14-548_cl_pass1_src1.csv
[Fri Jan 20 00:48:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13201_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13201_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 20 00:48:43 2012] fullrun_ccd2_acisf13201_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Jan 20 00:48:43 2012] fullrun_ccd2_acisf13201_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jan 20 00:48:43 2012] Fit fullrun_ccd2_acisf13201_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan 20 01:13:46 2012] Spatial fit model total counts = 127.000000, observed total counts = 127.000000
[Fri Jan 20 01:13:46 2012] Offset between fit and detection position for source 25 = 0.030897 pixels
[Fri Jan 20 01:13:46 2012] 126.904300 total counts/ 22.409300 bgd. counts: snr = 22.074017
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.030897 pixels
  Position = (529.2, 169.9) = 8 30 17.32 65 46 5.6
  Extent = 1.4 (1.1-1.7)", rotation angle = 0
  Source counts = 104.5 +/- 11.3
  Background counts = 22.4
  Rate = 0.002 +/- 0.0002
[Fri Jan 20 01:13:46 2012] Vigneting correction estimate = 1.000000
[Fri Jan 20 01:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 20 01:13:46 2012] Assessing source extent using major axis lower bound
[Fri Jan 20 01:13:46 2012] Source does appear to be extended
[Fri Jan 20 01:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 20 01:34:04 2012] Writing source region out to fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25_src.reg
[Fri Jan 20 01:34:04 2012] Extracting stamp from image fullrun_ccd2_acisf13201_pi14-548_cl_sm2.00.img.gz, (466, 107) - (592, 233)
[Fri Jan 20 01:34:04 2012] Writing fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25.gif
[Fri Jan 20 01:34:06 2012] Size of ../../acisf13201/products/events/fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25_src.evt.gz[events] = 123 counts
[Fri Jan 20 01:34:06 2012] Mean chipx,y = (907.28, 898.04)
[Fri Jan 20 01:34:06 2012] Mean tdetx,y = (3959.04, 3178.72)
[Fri Jan 20 01:34:06 2012] chipx,y range = (889.00-928.00, 873.00-919.00)
[Fri Jan 20 01:34:06 2012] Size of ../../acisf13201/products/events/fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 62 counts
[Fri Jan 20 01:34:07 2012] rmf not found, will run specextract
[Fri Jan 20 01:34:07 2012] arf not found, will run specextract
[Fri Jan 20 01:34:41 2012] ../../acisf13201/products/spectra/fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25.warf not found
[Fri Jan 20 01:34:41 2012] ../../acisf13201/products/spectra/fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25.wrmf not found
[Fri Jan 20 01:34:41 2012] Removal of ../../acisf13201/products/spectra/fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25.soff failed
[Fri Jan 20 01:46:46 2012] Keeping rmf generated by specextract
[Fri Jan 20 01:46:46 2012] 172.506
[Fri Jan 20 01:55:27 2012] Updating aperture counts using extracted products
[Fri Jan 20 01:55:27 2012] Error reading totcts from fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25_src.pi.gz
[Fri Jan 20 01:55:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 20 01:55:27 2012] Using photon index=1.80, rate=0.00215, arf fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25.arf
[Fri Jan 20 01:55:27 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jan 20 01:55:27 2012] Updating source flux to 2.9e-14
[Fri Jan 20 01:55:47 2012] Reading fit data from acisf13201/analysis//spectral/fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25_pl.csv
[Fri Jan 20 01:55:47 2012] Spectral fit parameter nH value = 5.12402e+15
[Fri Jan 20 01:55:47 2012] Spectral fit parameter PhoIndex value = 1.09734
[Fri Jan 20 01:55:47 2012] Failed to get F(0.3-8.0) from acisf13201/analysis//spectral/fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25_pl.csv, possibly due to different flux energy range selected
[Fri Jan 20 01:55:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 20 01:55:47 2012] Using Nh = 5.1e+15, photon index=1.10, rate=0.00215, arf fullrun_ccd2_acisf13201_pi14-548_pass1_cl_src25.arf
[Fri Jan 20 01:55:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jan 20 01:55:47 2012] Updating source flux to 3.7e-14