[Sun Dec 18 05:48:31 2011] Detection parameters:
  Position = (932.0, 917.2) = 15 10 37.85 33 28 23.6
  Extent = 1.1" x 0.7", rotation angle = 62 degrees
  Source counts = 23.9 +/- 5.0
  Background counts = 1.1
  Rate = 0.001 +/- 0.0003

[Sun Dec 18 05:48:31 2011] Off-axis axis estimate = 5.23'
[Sun Dec 18 05:52:28 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 05:52:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 05:52:28 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Sun Dec 18 05:52:28 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Sun Dec 18 05:52:28 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.28"
[Sun Dec 18 06:06:29 2011] fullrun_ccd0_acisf13192_pi14-548_cl_pass0_src1.ximg exists
[Sun Dec 18 06:06:29 2011] fullrun_ccd0_acisf13192_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Dec 18 06:06:29 2011] Fit fullrun_ccd0_acisf13192_pi14-548_cl_pass0_src1 appears to have run properly
[Sun Dec 18 06:06:29 2011] fullrun_ccd0_acisf13192_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 06:06:29 2011] fullrun_ccd0_acisf13192_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 06:06:29 2011] Fit fullrun_ccd0_acisf13192_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 06:47:39 2011] Spatial fit model total counts = 35.240900, observed total counts = 37.000000
[Sun Dec 18 06:47:39 2011] Offset between fit and detection position for source 1 = 2.212592 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.212592 pixels
  Position = (932.8, 919.2) = 15 10 37.84 33 28 24.4
  Extent = 1.7 (1.0-2.1)", rotation angle = 0
  Source counts = 35.4 +/- 6.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sun Dec 18 06:47:39 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 06:47:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 06:47:39 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 06:47:39 2011] Source does appear to be extended
[Sun Dec 18 06:47:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 06:47:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 06:47:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 06:47:53 2011] Initial guess for spatial extent in simple fitting = 1.71"
[Sun Dec 18 06:47:53 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.014
[Sun Dec 18 06:47:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.71"
[Sun Dec 18 06:58:40 2011] fullrun_ccd0_acisf13192_pi14-548_cl_pass1_src1.ximg exists
[Sun Dec 18 06:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13192_pi14-548_cl_pass1_src1.csv
[Sun Dec 18 06:58:40 2011] fullrun_ccd0_acisf13192_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Dec 18 06:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13192_pi14-548_cl_pass1_src1.csv
[Sun Dec 18 06:58:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13192_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13192_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 06:58:40 2011] fullrun_ccd0_acisf13192_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 06:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13192_pi14-548_cl_pass1_tfrozen_src1.csv
[Sun Dec 18 06:58:40 2011] fullrun_ccd0_acisf13192_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 06:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13192_pi14-548_cl_pass1_tfrozen_src1.csv
[Sun Dec 18 06:58:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13192_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13192_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 07:40:43 2011] Spatial fit model total counts = 34.741000, observed total counts = 39.000000
[Sun Dec 18 07:40:43 2011] Offset between fit and detection position for source 1 = 0.205145 pixels
[Sun Dec 18 07:40:43 2011] 35.129090 total counts/ 0.001590 bgd. counts: snr = 880.969701
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.205145 pixels
  Position = (932.9, 919.0) = 15 10 37.84 33 28 24.3
  Extent = 1.7 (1.3-2.0)", rotation angle = 0
  Source counts = 35.1 +/- 5.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sun Dec 18 07:40:43 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 07:40:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 07:40:43 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 07:40:43 2011] Source does appear to be extended
[Sun Dec 18 07:40:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 07:40:58 2011] Writing source region out to fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1_src.reg
[Sun Dec 18 07:40:58 2011] Extracting stamp from image fullrun_ccd0_acisf13192_pi14-548_cl_sm2.00.img.gz, (857, 843) - (1009, 995)
[Sun Dec 18 07:40:58 2011] Writing fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1.gif
[Sun Dec 18 07:40:59 2011] Size of ../../acisf13192/products/events/fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1_src.evt.gz[events] = 37 counts
[Sun Dec 18 07:40:59 2011] Mean chipx,y = (893.92, 750.84)
[Sun Dec 18 07:40:59 2011] Mean tdetx,y = (3811.84, 4238.08)
[Sun Dec 18 07:40:59 2011] chipx,y range = (869.00-914.00, 732.00-772.00)
[Sun Dec 18 07:40:59 2011] Size of ../../acisf13192/products/events/fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 40 counts
[Sun Dec 18 07:41:00 2011] Not generating rmf since there are only 35 counts
[Sun Dec 18 07:41:00 2011] arf not found, will run specextract
[Sun Dec 18 07:41:25 2011] ../../acisf13192/products/spectra/fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1.warf not found
[Sun Dec 18 07:41:25 2011] ../../acisf13192/products/spectra/fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1.wrmf not found
[Sun Dec 18 07:41:25 2011] Removal of ../../acisf13192/products/spectra/fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1.soff failed
[Sun Dec 18 07:44:19 2011] Spectrum 1 has only 35 counts, deleting rmf
[Sun Dec 18 07:44:19 2011] 187.978
[Sun Dec 18 07:59:59 2011] Updating aperture counts using extracted products
[Sun Dec 18 07:59:59 2011] Error reading totcts from fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Dec 18 07:59:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 07:59:59 2011] Using photon index=1.80, rate=0.00209, arf fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1.arf
[Sun Dec 18 07:59:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Dec 18 07:59:59 2011] Updating source flux to 2.6e-14
[Sun Dec 18 08:00:02 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Dec 18 08:00:03 2011] acisf13192/analysis//spectral/fullrun_ccd0_acisf13192_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete