[Mon Nov 28 17:38:54 2011] Detection parameters:
  Position = (832.5, 736.7) = 7 32 7.59 -7 25 49.1
  Extent = 0.5" x 0.5", rotation angle = 124 degrees
  Source counts = 11.8 +/- 3.5
  Background counts = 0.2
  Rate = 0.001 +/- 0.0004

[Mon Nov 28 17:38:55 2011] Off-axis axis estimate = 3.00'
[Mon Nov 28 18:23:42 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 18:23:42 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Mon Nov 28 18:23:42 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.797
[Mon Nov 28 18:23:42 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.58"
[Mon Nov 28 18:32:25 2011] fullrun_ccd7_acisf13189_pi14-548_cl_pass0_src8.ximg exists
[Mon Nov 28 18:32:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13189_pi14-548_cl_pass0_src8.csv
[Mon Nov 28 18:32:25 2011] fullrun_ccd7_acisf13189_pi14-548_cl_pass0_src8_1.ximg exists
[Mon Nov 28 18:32:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13189_pi14-548_cl_pass0_src8.csv
[Mon Nov 28 18:32:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13189_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13189_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 18:32:25 2011] fullrun_ccd7_acisf13189_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Mon Nov 28 18:32:25 2011] fullrun_ccd7_acisf13189_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Nov 28 18:32:25 2011] Fit fullrun_ccd7_acisf13189_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Nov 28 18:32:29 2011] Spatial fit model total counts = 12.049900, observed total counts = 12.000000
[Mon Nov 28 18:32:29 2011] Offset between fit and detection position for source 3 = 0.619027 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.619027 pixels
  Position = (832.9, 737.1) = 7 32 7.59 -7 25 49.1
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Mon Nov 28 18:32:29 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 18:32:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 18:32:29 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 18:32:29 2011] Source does appear to be extended
[Mon Nov 28 18:32:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 19:12:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 19:12:36 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Nov 28 19:12:36 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.175
[Mon Nov 28 19:12:36 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.66"
[Mon Nov 28 19:20:56 2011] fullrun_ccd7_acisf13189_pi14-548_cl_pass1_src8.ximg exists
[Mon Nov 28 19:20:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13189_pi14-548_cl_pass1_src8.csv
[Mon Nov 28 19:20:57 2011] fullrun_ccd7_acisf13189_pi14-548_cl_pass1_src8_1.ximg exists
[Mon Nov 28 19:20:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13189_pi14-548_cl_pass1_src8.csv
[Mon Nov 28 19:20:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13189_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13189_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 19:20:57 2011] fullrun_ccd7_acisf13189_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Mon Nov 28 19:20:57 2011] fullrun_ccd7_acisf13189_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Nov 28 19:20:57 2011] Fit fullrun_ccd7_acisf13189_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Nov 28 19:21:01 2011] Spatial fit model total counts = 12.158000, observed total counts = 12.000000
[Mon Nov 28 19:21:01 2011] Offset between fit and detection position for source 3 = 0.056043 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.056043 pixels
  Position = (833.0, 737.1) = 7 32 7.59 -7 25 49.1
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Mon Nov 28 19:21:01 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 19:21:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 19:21:01 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 19:21:01 2011] Source does appear to be extended
[Mon Nov 28 19:21:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 19:28:19 2011] Writing source region out to fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3_src.reg
[Mon Nov 28 19:28:19 2011] Extracting stamp from image fullrun_ccd7_acisf13189_pi14-548_cl_sm2.00.img.gz, (801, 705) - (865, 769)
[Mon Nov 28 19:28:19 2011] Writing fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3.gif
[Mon Nov 28 19:30:16 2011] Size of ../../acisf13189/products/events/fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3_src.evt.gz[events] = 12 counts
[Mon Nov 28 19:30:16 2011] Mean chipx,y = (519.50, 348.17)
[Mon Nov 28 19:30:16 2011] Mean tdetx,y = (4436.50, 2050.17)
[Mon Nov 28 19:30:16 2011] chipx,y range = (501.00-534.00, 330.00-364.00)
[Mon Nov 28 19:30:16 2011] Size of ../../acisf13189/products/events/fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3 counts
[Mon Nov 28 19:30:17 2011] Not generating rmf since there are only 12 counts
[Mon Nov 28 19:30:17 2011] arf not found, will run specextract
[Mon Nov 28 19:30:24 2011] ../../acisf13189/products/spectra/fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3.warf not found
[Mon Nov 28 19:30:24 2011] ../../acisf13189/products/spectra/fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3.wrmf not found
[Mon Nov 28 19:30:24 2011] Removal of ../../acisf13189/products/spectra/fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3.soff failed
[Mon Nov 28 19:32:47 2011] Spectrum 3 has only 12 counts, deleting rmf
[Mon Nov 28 19:32:47 2011] 217.649
[Mon Nov 28 19:32:49 2011] Updating aperture counts using extracted products
[Mon Nov 28 19:32:49 2011] Error reading totcts from fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Nov 28 19:32:49 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 19:32:49 2011] Using photon index=1.80, rate=0.00134, arf fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3.arf
[Mon Nov 28 19:32:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 28 19:32:49 2011] Updating source flux to 1.2e-14
[Mon Nov 28 19:32:55 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Nov 28 19:32:56 2011] acisf13189/analysis//spectral/fullrun_ccd7_acisf13189_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete