[Thu Dec 22 02:23:40 2011] Detection parameters:
  Position = (389.5, 1122.3) = 12 15 9.03 -65 30 18.1
  Extent = 0.6" x 0.5", rotation angle = 165 degrees
  Source counts = 40.8 +/- 6.6
  Background counts = 3.2
  Rate = 0.001 +/- 0.0002

[Thu Dec 22 02:23:40 2011] Off-axis axis estimate = 3.22'
[Thu Dec 22 03:42:35 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 03:42:35 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Thu Dec 22 03:42:35 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.717
[Thu Dec 22 03:42:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.63"
[Thu Dec 22 04:12:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src3.ximg exists
[Thu Dec 22 04:12:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src3.csv
[Thu Dec 22 04:12:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Dec 22 04:12:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src3.csv
[Thu Dec 22 04:12:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 04:12:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec 22 04:12:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec 22 04:12:15 2011] Fit fullrun_ccd3_acisf13187_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec 22 04:12:29 2011] Spatial fit model total counts = 46.412800, observed total counts = 47.000000
[Thu Dec 22 04:12:29 2011] Offset between fit and detection position for source 9 = 0.765257 pixels
[Thu Dec 22 04:12:29 2011] 46.073130 total counts/ 4.392630 bgd. counts: snr = 19.887061
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.765257 pixels
  Position = (390.0, 1122.8) = 12 15 9.03 -65 30 18.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 41.7 +/- 6.8
  Background counts = 4.4
  Rate = 0.001 +/- 0.0002
[Thu Dec 22 04:12:29 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 04:12:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 04:12:29 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 04:12:29 2011] Source does appear to be extended
[Thu Dec 22 04:12:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 05:14:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 05:14:09 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Dec 22 05:14:09 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.345
[Thu Dec 22 05:14:09 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.60"
[Thu Dec 22 05:41:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src3.ximg exists
[Thu Dec 22 05:41:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src3.csv
[Thu Dec 22 05:41:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Dec 22 05:41:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src3.csv
[Thu Dec 22 05:41:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 05:41:16 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Dec 22 05:41:16 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Dec 22 05:41:16 2011] Fit fullrun_ccd3_acisf13187_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Dec 22 05:41:29 2011] Spatial fit model total counts = 47.623400, observed total counts = 48.000000
[Thu Dec 22 05:41:29 2011] Offset between fit and detection position for source 9 = 0.023215 pixels
[Thu Dec 22 05:41:29 2011] 47.578580 total counts/ 5.931180 bgd. counts: snr = 17.100836
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.023215 pixels
  Position = (390.0, 1122.8) = 12 15 9.03 -65 30 18.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 41.6 +/- 6.9
  Background counts = 5.9
  Rate = 0.001 +/- 0.0002
[Thu Dec 22 05:41:29 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 05:41:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 05:41:29 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 05:41:29 2011] Source does appear to be extended
[Thu Dec 22 05:41:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 06:08:32 2011] Writing source region out to fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9_src.reg
[Thu Dec 22 06:08:32 2011] Extracting stamp from image fullrun_ccd3_acisf13187_pi14-548_cl_sm2.00.img.gz, (362, 1095) - (418, 1151)
[Thu Dec 22 06:08:32 2011] Writing fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9.gif
[Thu Dec 22 06:09:42 2011] Size of ../../acisf13187/products/events/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9_src.evt.gz[events] = 44 counts
[Thu Dec 22 06:09:42 2011] Mean chipx,y = (1012.75, 649.77)
[Thu Dec 22 06:09:42 2011] Mean tdetx,y = (4482.23, 4073.75)
[Thu Dec 22 06:09:42 2011] chipx,y range = (1002.00-1023.00, 631.00-664.00)
[Thu Dec 22 06:09:42 2011] Size of ../../acisf13187/products/events/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 29 counts
[Thu Dec 22 06:09:43 2011] Not generating rmf since there are only 41 counts
[Thu Dec 22 06:09:43 2011] arf not found, will run specextract
[Thu Dec 22 06:10:07 2011] ../../acisf13187/products/spectra/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9.warf not found
[Thu Dec 22 06:10:07 2011] ../../acisf13187/products/spectra/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9.wrmf not found
[Thu Dec 22 06:10:07 2011] Removal of ../../acisf13187/products/spectra/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9.soff failed
[Thu Dec 22 06:22:46 2011] Spectrum 9 has only 42 counts, deleting rmf
[Thu Dec 22 06:22:46 2011] 112.627
[Thu Dec 22 06:22:50 2011] Updating aperture counts using extracted products
[Thu Dec 22 06:22:50 2011] Error reading totcts from fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9_src.pi.gz
[Thu Dec 22 06:22:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 06:22:50 2011] Using photon index=1.80, rate=0.00103, arf fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9.arf
[Thu Dec 22 06:22:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Dec 22 06:22:50 2011] Updating source flux to 2.4e-14
[Thu Dec 22 06:23:02 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Dec 22 06:23:03 2011] acisf13187/analysis//spectral/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete