[Thu Dec 22 02:23:40 2011] Detection parameters:
  Position = (742.4, 787.3) = 12 14 41.10 -65 33 3.0
  Extent = 0.7" x 0.5", rotation angle = 78 degrees
  Source counts = 21.4 +/- 5.7
  Background counts = 11.6
  Rate = 0.0005 +/- 0.0001

[Thu Dec 22 02:23:40 2011] Off-axis axis estimate = 4.95'
[Thu Dec 22 03:42:35 2011] Using EEF radius (= 1.16 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 03:42:35 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Thu Dec 22 03:42:35 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Thu Dec 22 03:42:35 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 1.16"
[Thu Dec 22 04:12:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src17.ximg exists
[Thu Dec 22 04:12:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src17.csv
[Thu Dec 22 04:12:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src17_1.ximg exists
[Thu Dec 22 04:12:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src17.csv
[Thu Dec 22 04:12:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13187_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 04:12:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Thu Dec 22 04:12:15 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Dec 22 04:12:15 2011] Fit fullrun_ccd3_acisf13187_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Dec 22 04:12:29 2011] Warning, spatial fit 17 centroid is now closest to src. 26
[Thu Dec 22 04:12:29 2011] Spatial fit model total counts = 191.214000, observed total counts = 192.000000
[Thu Dec 22 04:12:29 2011] Offset between fit and detection position for source 24 = 5.585817 pixels
[Thu Dec 22 04:12:29 2011] Warning, changing simple spatial fit ID from 17 to 18
[Thu Dec 22 04:12:29 2011] 194.241000 total counts/ 148.902000 bgd. counts: snr = 3.715538
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 5.585817 pixels
  Position = (747.9, 786.2) = 12 14 40.70 -65 33 3.8
  Extent = 2.3 (2.3-4.6)", rotation angle = 0
  Source counts = 45.3 +/- 13.9
  Background counts = 148.9
  Rate = 0.001 +/- 0.0003
[Thu Dec 22 04:12:29 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 04:12:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 04:12:29 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 04:12:29 2011] Source does appear to be extended
[Thu Dec 22 04:12:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 05:14:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 05:14:09 2011] Initial guess for spatial extent in simple fitting = 2.32"
[Thu Dec 22 05:14:09 2011] source mask rpix=4.7, npix_max = 108, mask sum = 88, frac = 0.808
[Thu Dec 22 05:14:09 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 2.32"
[Thu Dec 22 05:41:16 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src17.ximg exists
[Thu Dec 22 05:41:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src17.csv
[Thu Dec 22 05:41:16 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src17_1.ximg exists
[Thu Dec 22 05:41:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src17.csv
[Thu Dec 22 05:41:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13187_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 05:41:16 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Thu Dec 22 05:41:16 2011] fullrun_ccd3_acisf13187_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Dec 22 05:41:16 2011] Fit fullrun_ccd3_acisf13187_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Dec 22 05:41:29 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 24.840304 pixels away
[Thu Dec 22 05:41:29 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 05:41:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 05:41:29 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 05:41:29 2011] Source does appear to be extended
[Thu Dec 22 05:41:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 06:08:33 2011] Writing source region out to fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24_src.reg
[Thu Dec 22 06:08:33 2011] Extracting stamp from image fullrun_ccd3_acisf13187_pi14-548_cl_sm2.00.img.gz, (642, 680) - (854, 892)
[Thu Dec 22 06:08:33 2011] Writing fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24.gif
[Thu Dec 22 06:16:50 2011] Size of ../../acisf13187/products/events/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24_src.evt.gz[events] = 665 counts
[Thu Dec 22 06:16:50 2011] Mean chipx,y = (531.71, 585.78)
[Thu Dec 22 06:16:50 2011] Mean tdetx,y = (4546.22, 3592.71)
[Thu Dec 22 06:16:50 2011] chipx,y range = (499.00-566.00, 552.00-619.00)
[Thu Dec 22 06:16:50 2011] Size of ../../acisf13187/products/events/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 2911 counts
[Thu Dec 22 06:16:52 2011] Not generating rmf since there are only 45 counts
[Thu Dec 22 06:16:52 2011] arf not found, will run specextract
[Thu Dec 22 06:17:16 2011] ../../acisf13187/products/spectra/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24.warf not found
[Thu Dec 22 06:17:16 2011] ../../acisf13187/products/spectra/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24.wrmf not found
[Thu Dec 22 06:17:16 2011] Removal of ../../acisf13187/products/spectra/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24.soff failed
[Thu Dec 22 06:22:46 2011] Spectrum 24 has only 45 counts, deleting rmf
[Thu Dec 22 06:22:46 2011] 161.114
[Thu Dec 22 06:22:50 2011] Updating aperture counts using extracted products
[Thu Dec 22 06:22:50 2011] Error reading totcts from fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24_src.pi.gz
[Thu Dec 22 06:22:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 06:22:50 2011] Using photon index=1.80, rate=0.00112, arf fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24.arf
[Thu Dec 22 06:22:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Dec 22 06:22:50 2011] Updating source flux to 1.8e-14
[Thu Dec 22 06:23:02 2011] Source 24 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Dec 22 06:23:03 2011] acisf13187/analysis//spectral/fullrun_ccd3_acisf13187_pi14-548_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete