[Wed Nov 23 01:33:21 2011] Detection parameters:
  Position = (261.8, 505.4) = 8 23 56.34 -42 50 48.0
  Extent = 2.0" x 1.9", rotation angle = 140 degrees
  Source counts = 180.6 +/- 33.0
  Background counts = 905.4
  Rate = 0.02 +/- 0.003

[Wed Nov 23 01:33:25 2011] Off-axis axis estimate = 9.14'
[Wed Nov 23 02:04:06 2011] Using EEF radius (= 3.69 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 02:04:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 02:04:06 2011] Initial guess for spatial extent in simple fitting = 3.69"
[Wed Nov 23 02:04:06 2011] source mask rpix=7.5, npix_max = 256, mask sum = 256, frac = 0.998
[Wed Nov 23 02:04:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.69"
[Wed Nov 23 03:25:44 2011] fullrun_ccd0_acisf13183_pi14-548_cl_pass0_src1.ximg exists
[Wed Nov 23 03:25:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13183_pi14-548_cl_pass0_src1.csv
[Wed Nov 23 03:25:44 2011] fullrun_ccd0_acisf13183_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Nov 23 03:25:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13183_pi14-548_cl_pass0_src1.csv
[Wed Nov 23 03:25:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13183_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13183_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 03:25:44 2011] fullrun_ccd0_acisf13183_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 23 03:25:44 2011] fullrun_ccd0_acisf13183_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 23 03:25:44 2011] Fit fullrun_ccd0_acisf13183_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 23 06:47:13 2011] Spatial fit model total counts = 2233.000000, observed total counts = 2233.000000
[Wed Nov 23 06:47:13 2011] Offset between fit and detection position for source 1 = 2.189846 pixels
[Wed Nov 23 06:47:13 2011] 2245.012000 total counts/ 1763.530000 bgd. counts: snr = 11.465385
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.189846 pixels
  Position = (264.0, 504.9) = 8 23 56.27 -42 50 48.5
  Extent = 7.4 (7.1-14.8)", rotation angle = 0
  Source counts = 481.5 +/- 47.4
  Background counts = 1763.5
  Rate = 0.04 +/- 0.004
[Wed Nov 23 06:47:13 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 06:47:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 06:47:13 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 06:47:13 2011] Source does appear to be extended
[Wed Nov 23 06:47:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 06:47:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 23 06:47:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 06:47:50 2011] Initial guess for spatial extent in simple fitting = 7.39"
[Wed Nov 23 06:47:50 2011] source mask rpix=15.0, npix_max = 962, mask sum = 961, frac = 0.998
[Wed Nov 23 06:47:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.39"
[Wed Nov 23 07:27:41 2011] fullrun_ccd0_acisf13183_pi14-548_cl_pass1_src1.ximg exists
[Wed Nov 23 07:27:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13183_pi14-548_cl_pass1_src1.csv
[Wed Nov 23 07:27:41 2011] fullrun_ccd0_acisf13183_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Nov 23 07:27:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13183_pi14-548_cl_pass1_src1.csv
[Wed Nov 23 07:27:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13183_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13183_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 07:27:42 2011] fullrun_ccd0_acisf13183_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 23 07:27:42 2011] fullrun_ccd0_acisf13183_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 23 07:27:42 2011] Fit fullrun_ccd0_acisf13183_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov 23 09:52:45 2011] Warning, spatial fit 1 centroid is now closest to src. 12
[Wed Nov 23 09:52:45 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 09:52:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 09:52:45 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 09:52:45 2011] Source does appear to be extended
[Wed Nov 23 09:52:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 09:53:13 2011] Writing source region out to fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1_src.reg
[Wed Nov 23 09:53:13 2011] Extracting stamp from image fullrun_ccd0_acisf13183_pi14-548_cl_sm2.00.img.gz, (0, 167) - (602, 843)
[Wed Nov 23 09:53:13 2011] Writing fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1.gif
[Wed Nov 23 09:53:22 2011] Size of ../../acisf13183/products/events/fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1_src.evt.gz[events] = 6481 counts
[Wed Nov 23 09:53:22 2011] Mean chipx,y = (130.29, 553.88)
[Wed Nov 23 09:53:22 2011] Mean tdetx,y = (3614.88, 5001.71)
[Wed Nov 23 09:53:22 2011] chipx,y range = (44.00-198.00, 473.00-623.00)
[Wed Nov 23 09:53:22 2011] Size of ../../acisf13183/products/events/fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 46405 counts
[Wed Nov 23 09:53:24 2011] rmf not found, will run specextract
[Wed Nov 23 09:53:24 2011] arf not found, will run specextract
[Wed Nov 23 09:53:51 2011] ../../acisf13183/products/spectra/fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1.warf not found
[Wed Nov 23 09:53:51 2011] ../../acisf13183/products/spectra/fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1.wrmf not found
[Wed Nov 23 09:53:51 2011] Removal of ../../acisf13183/products/spectra/fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1.soff failed
[Wed Nov 23 10:06:40 2011] Keeping rmf generated by specextract
[Wed Nov 23 10:06:40 2011] 166.608
[Wed Nov 23 10:34:41 2011] Updating aperture counts using extracted products
[Wed Nov 23 10:34:41 2011] Error reading totcts from fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Nov 23 10:34:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 23 10:34:41 2011] Using photon index=1.80, rate=0.0408, arf fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1.arf
[Wed Nov 23 10:34:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov 23 10:34:41 2011] Updating source flux to 6.5e-13
[Wed Nov 23 10:36:42 2011] Reading fit data from acisf13183/analysis//spectral/fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1_pl.csv
[Wed Nov 23 10:36:42 2011] Spectral fit parameter nH value = 9.21909e+21
[Wed Nov 23 10:36:42 2011] Spectral fit parameter PhoIndex value = 8.28687
[Wed Nov 23 10:36:42 2011] Failed to get F(0.3-8.0) from acisf13183/analysis//spectral/fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Nov 23 10:36:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 23 10:36:42 2011] Using Nh = 9.2e+21, photon index=8.29, rate=0.0408, arf fullrun_ccd0_acisf13183_pi14-548_pass1_cl_src1.arf
[Wed Nov 23 10:36:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov 23 10:36:42 2011] Updating source flux to 3.8e-13