[Sun Feb 12 00:25:36 2012] Detection parameters:
  Position = (454.6, 777.1) = 11 15 24.01 -61 20 16.0
  Extent = 0.8" x 0.7", rotation angle = 159 degrees
  Source counts = 21.5 +/- 4.9
  Background counts = 2.5
  Rate = 0.0004 +/- 9e-05

[Sun Feb 12 00:25:39 2012] Off-axis axis estimate = 5.50'
[Sun Feb 12 02:15:54 2012] Using EEF radius (= 1.39 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 02:15:54 2012] Initial guess for spatial extent in simple fitting = 1.39"
[Sun Feb 12 02:15:54 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.948
[Sun Feb 12 02:15:54 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 1.39"
[Sun Feb 12 04:20:48 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src55.ximg exists
[Sun Feb 12 04:20:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src55.csv
[Sun Feb 12 04:20:48 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src55_1.ximg exists
[Sun Feb 12 04:20:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src55.csv
[Sun Feb 12 04:20:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 04:20:49 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Sun Feb 12 04:20:49 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Feb 12 04:20:49 2012] Fit fullrun_ccd3_acisf13162_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Sun Feb 12 04:21:20 2012] Spatial fit model total counts = 29.381800, observed total counts = 30.000000
[Sun Feb 12 04:21:20 2012] Offset between fit and detection position for source 123 = 0.619211 pixels
[Sun Feb 12 04:21:20 2012] 30.123110 total counts/ 5.852610 bgd. counts: snr = 10.032379
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 0.619211 pixels
  Position = (455.0, 777.6) = 11 15 24.02 -61 20 16.0
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 24.3 +/- 5.5
  Background counts = 5.9
  Rate = 0.0005 +/- 0.0001
[Sun Feb 12 04:21:20 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 04:21:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 04:21:20 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 04:21:20 2012] Source does appear to be extended
[Sun Feb 12 04:21:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 06:07:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 06:07:19 2012] Initial guess for spatial extent in simple fitting = 0.96"
[Sun Feb 12 06:07:19 2012] source mask rpix=1.9, npix_max = 24, mask sum = 20, frac = 0.833
[Sun Feb 12 06:07:19 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 0.96"
[Sun Feb 12 08:05:09 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src53.ximg exists
[Sun Feb 12 08:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src53.csv
[Sun Feb 12 08:05:09 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src53_1.ximg exists
[Sun Feb 12 08:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src53.csv
[Sun Feb 12 08:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 08:05:10 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass1_tfrozen_src53.ximg exists
[Sun Feb 12 08:05:10 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass1_tfrozen_src53_1.ximg exists
[Sun Feb 12 08:05:10 2012] Fit fullrun_ccd3_acisf13162_pi14-548_cl_pass1_tfrozen_src53 appears to have run properly
[Sun Feb 12 08:05:36 2012] Spatial fit model total counts = 27.955700, observed total counts = 29.000000
[Sun Feb 12 08:05:36 2012] Offset between fit and detection position for source 123 = 0.053881 pixels
[Sun Feb 12 08:05:36 2012] 28.399140 total counts/ 4.287340 bgd. counts: snr = 11.644897
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 0.053881 pixels
  Position = (455.0, 777.6) = 11 15 24.01 -61 20 16.0
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 24.1 +/- 5.3
  Background counts = 4.3
  Rate = 0.0005 +/- 0.0001
[Sun Feb 12 08:05:36 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 08:05:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 08:05:36 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 08:05:36 2012] Source does appear to be extended
[Sun Feb 12 08:05:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 09:12:30 2012] Writing source region out to fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123_src.reg
[Sun Feb 12 09:12:30 2012] Extracting stamp from image fullrun_ccd3_acisf13162_pi14-548_cl_sm2.00.img.gz, (411, 733) - (499, 822)
[Sun Feb 12 09:12:30 2012] Writing fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123.gif
[Sun Feb 12 09:45:05 2012] Size of ../../acisf13162/products/events/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123_src.evt.gz[events] = 27 counts
[Sun Feb 12 09:45:05 2012] Mean chipx,y = (756.78, 385.07)
[Sun Feb 12 09:45:05 2012] Mean tdetx,y = (4746.93, 3817.78)
[Sun Feb 12 09:45:05 2012] chipx,y range = (737.00-775.00, 367.00-403.00)
[Sun Feb 12 09:45:05 2012] Size of ../../acisf13162/products/events/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123_bgd.evt.gz[events] = 50 counts
[Sun Feb 12 09:45:06 2012] Not generating rmf since there are only 24 counts
[Sun Feb 12 09:45:06 2012] arf not found, will run specextract
[Sun Feb 12 09:45:29 2012] ../../acisf13162/products/spectra/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123.warf not found
[Sun Feb 12 09:45:29 2012] ../../acisf13162/products/spectra/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123.wrmf not found
[Sun Feb 12 09:45:29 2012] Removal of ../../acisf13162/products/spectra/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123.soff failed
[Sun Feb 12 09:59:48 2012] Spectrum 123 has only 24 counts, deleting rmf
[Sun Feb 12 09:59:48 2012] 167.292
[Sun Feb 12 09:59:55 2012] Updating aperture counts using extracted products
[Sun Feb 12 09:59:55 2012] Error reading totcts from fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123_src.pi.gz
[Sun Feb 12 09:59:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 09:59:56 2012] Using photon index=1.80, rate=0.000468, arf fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src123.arf
[Sun Feb 12 09:59:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 09:59:56 2012] Updating source flux to 8.4e-15
[Sun Feb 12 10:00:20 2012] Source 123 has fewer than 100.000000 counts, skipping spectral fitting