[Sun Feb 12 00:25:36 2012] Detection parameters:
  Position = (757.2, 776.2) = 11 15 3.32 -61 20 16.6
  Extent = 1.0" x 0.6", rotation angle = 10 degrees
  Source counts = 21.0 +/- 4.8
  Background counts = 2.0
  Rate = 0.0004 +/- 9e-05

[Sun Feb 12 00:25:39 2012] Off-axis axis estimate = 4.93'
[Sun Feb 12 02:15:54 2012] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 02:15:54 2012] Initial guess for spatial extent in simple fitting = 1.15"
[Sun Feb 12 02:15:54 2012] source mask rpix=2.3, npix_max = 32, mask sum = 31, frac = 0.957
[Sun Feb 12 02:15:54 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 1.15"
[Sun Feb 12 04:20:48 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src57.ximg exists
[Sun Feb 12 04:20:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src57.csv
[Sun Feb 12 04:20:48 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src57_1.ximg exists
[Sun Feb 12 04:20:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src57.csv
[Sun Feb 12 04:20:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13162_pi14-548_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 04:20:49 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass0_tfrozen_src57.ximg exists
[Sun Feb 12 04:20:49 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass0_tfrozen_src57_1.ximg exists
[Sun Feb 12 04:20:49 2012] Fit fullrun_ccd3_acisf13162_pi14-548_cl_pass0_tfrozen_src57 appears to have run properly
[Sun Feb 12 04:21:20 2012] Spatial fit model total counts = 24.960700, observed total counts = 28.000000
[Sun Feb 12 04:21:20 2012] Offset between fit and detection position for source 122 = 0.349884 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 0.349884 pixels
  Position = (757.3, 776.5) = 11 15 3.34 -61 20 16.7
  Extent = 1.4" x 0.8", rotation angle = 5
  Source counts = 25.2 +/- 5.0
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sun Feb 12 04:21:20 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 04:21:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 04:21:20 2012] Assessing source extent using major
[Sun Feb 12 04:21:20 2012] Source does appear to be extended
[Sun Feb 12 04:21:20 2012] Computing asymmetry using major and minor axis, asym = 1.73
[Sun Feb 12 04:21:20 2012] Source is asymmetric
[Sun Feb 12 06:07:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 06:07:19 2012] Initial guess for spatial extent in simple fitting = 1.09"
[Sun Feb 12 06:07:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.711
[Sun Feb 12 06:07:19 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 1.09"
[Sun Feb 12 08:05:09 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src55.ximg exists
[Sun Feb 12 08:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src55.csv
[Sun Feb 12 08:05:09 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src55_1.ximg exists
[Sun Feb 12 08:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src55.csv
[Sun Feb 12 08:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13162_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 08:05:10 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Sun Feb 12 08:05:10 2012] fullrun_ccd3_acisf13162_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Sun Feb 12 08:05:10 2012] Fit fullrun_ccd3_acisf13162_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Sun Feb 12 08:05:36 2012] Spatial fit model total counts = 26.027100, observed total counts = 28.000000
[Sun Feb 12 08:05:36 2012] Offset between fit and detection position for source 122 = 0.103139 pixels
[Sun Feb 12 08:05:36 2012] 26.007100 total counts/ 0.000000 bgd. counts: snr = 426889467708169.875000
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 0.103139 pixels
  Position = (757.4, 776.6) = 11 15 3.34 -61 20 16.6
  Extent = 1.2 (0.8-1.4)", rotation angle = 0
  Source counts = 26.0 +/- 5.1
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sun Feb 12 08:05:36 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 08:05:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 08:05:36 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 08:05:36 2012] Source does appear to be extended
[Sun Feb 12 08:05:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 09:12:30 2012] Writing source region out to fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122_src.reg
[Sun Feb 12 09:12:30 2012] Extracting stamp from image fullrun_ccd3_acisf13162_pi14-548_cl_sm2.00.img.gz, (704, 723) - (811, 830)
[Sun Feb 12 09:12:30 2012] Writing fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122.gif
[Sun Feb 12 09:46:19 2012] Size of ../../acisf13162/products/events/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122_src.evt.gz[events] = 30 counts
[Sun Feb 12 09:46:19 2012] Mean chipx,y = (529.40, 588.73)
[Sun Feb 12 09:46:19 2012] Mean tdetx,y = (4543.27, 3590.40)
[Sun Feb 12 09:46:19 2012] chipx,y range = (508.00-553.00, 570.00-609.00)
[Sun Feb 12 09:46:19 2012] Size of ../../acisf13162/products/events/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122_bgd.evt.gz[events] = 65 counts
[Sun Feb 12 09:46:21 2012] Not generating rmf since there are only 26 counts
[Sun Feb 12 09:46:21 2012] arf not found, will run specextract
[Sun Feb 12 09:46:52 2012] ../../acisf13162/products/spectra/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122.warf not found
[Sun Feb 12 09:46:52 2012] ../../acisf13162/products/spectra/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122.wrmf not found
[Sun Feb 12 09:46:52 2012] Removal of ../../acisf13162/products/spectra/fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122.soff failed
[Sun Feb 12 09:59:48 2012] Spectrum 122 has only 26 counts, deleting rmf
[Sun Feb 12 09:59:48 2012] 168.945
[Sun Feb 12 09:59:55 2012] Updating aperture counts using extracted products
[Sun Feb 12 09:59:55 2012] Error reading totcts from fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122_src.pi.gz
[Sun Feb 12 09:59:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 09:59:56 2012] Using photon index=1.80, rate=0.000504, arf fullrun_ccd3_acisf13162_pi14-548_pass1_cl_src122.arf
[Sun Feb 12 09:59:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 09:59:56 2012] Updating source flux to 9e-15
[Sun Feb 12 10:00:20 2012] Source 122 has fewer than 100.000000 counts, skipping spectral fitting