[Sun Feb 12 00:25:28 2012] Detection parameters:
  Position = (339.8, 524.3) = 11 14 44.10 -61 16 15.4
  Extent = 0.7" x 0.5", rotation angle = 122 degrees
  Source counts = 28.0 +/- 5.5
  Background counts = 2.0
  Rate = 0.0005 +/- 0.0001

[Sun Feb 12 00:25:30 2012] Off-axis axis estimate = 2.52'
[Sun Feb 12 01:41:53 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 01:41:53 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Sun Feb 12 01:41:53 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.989
[Sun Feb 12 01:41:53 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.50"
[Sun Feb 12 02:15:53 2012] fullrun_ccd2_acisf13162_pi14-548_cl_pass0_src10.ximg exists
[Sun Feb 12 02:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13162_pi14-548_cl_pass0_src10.csv
[Sun Feb 12 02:15:53 2012] fullrun_ccd2_acisf13162_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Feb 12 02:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13162_pi14-548_cl_pass0_src10.csv
[Sun Feb 12 02:15:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13162_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13162_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 02:15:54 2012] fullrun_ccd2_acisf13162_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Feb 12 02:15:54 2012] fullrun_ccd2_acisf13162_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Feb 12 02:15:54 2012] Fit fullrun_ccd2_acisf13162_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Feb 12 04:21:07 2012] Spatial fit model total counts = 33.347100, observed total counts = 33.000000
[Sun Feb 12 04:21:07 2012] Offset between fit and detection position for source 6 = 0.930741 pixels
[Sun Feb 12 04:21:07 2012] 32.668650 total counts/ 6.107050 bgd. counts: snr = 10.748268
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.930741 pixels
  Position = (340.5, 524.8) = 11 14 44.09 -61 16 15.3
  Extent = 0.5 (0.3-0.5)", rotation angle = 0
  Source counts = 26.6 +/- 5.7
  Background counts = 6.1
  Rate = 0.0005 +/- 0.0001
[Sun Feb 12 04:21:07 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 04:21:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 04:21:07 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 04:21:07 2012] Source does appear to be extended
[Sun Feb 12 04:21:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 05:31:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 05:31:45 2012] Initial guess for spatial extent in simple fitting = 0.51"
[Sun Feb 12 05:31:45 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.966
[Sun Feb 12 05:31:45 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.51"
[Sun Feb 12 06:07:19 2012] fullrun_ccd2_acisf13162_pi14-548_cl_pass1_src10.ximg exists
[Sun Feb 12 06:07:19 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf13162_pi14-548_cl_pass1_src10.csv
[Sun Feb 12 06:07:19 2012] fullrun_ccd2_acisf13162_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Feb 12 06:07:19 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf13162_pi14-548_cl_pass1_src10.csv
[Sun Feb 12 06:07:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13162_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13162_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 06:07:19 2012] fullrun_ccd2_acisf13162_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Feb 12 06:07:19 2012] fullrun_ccd2_acisf13162_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Feb 12 06:07:19 2012] Fit fullrun_ccd2_acisf13162_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Feb 12 08:05:26 2012] Spatial fit model total counts = 32.973500, observed total counts = 33.000000
[Sun Feb 12 08:05:26 2012] Offset between fit and detection position for source 6 = 0.038915 pixels
[Sun Feb 12 08:05:26 2012] 32.753240 total counts/ 7.485940 bgd. counts: snr = 9.234974
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.038915 pixels
  Position = (340.5, 524.9) = 11 14 44.08 -61 16 15.3
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 25.3 +/- 5.7
  Background counts = 7.5
  Rate = 0.0005 +/- 0.0001
[Sun Feb 12 08:05:26 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 08:05:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 08:05:26 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 08:05:26 2012] Source does appear to be extended
[Sun Feb 12 08:05:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 08:48:30 2012] Writing source region out to fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6_src.reg
[Sun Feb 12 08:48:30 2012] Extracting stamp from image fullrun_ccd2_acisf13162_pi14-548_cl_sm2.00.img.gz, (318, 503) - (363, 547)
[Sun Feb 12 08:48:30 2012] Writing fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6.gif
[Sun Feb 12 08:54:23 2012] Size of ../../acisf13162/products/events/fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6_src.evt.gz[events] = 28 counts
[Sun Feb 12 08:54:23 2012] Mean chipx,y = (364.00, 930.50)
[Sun Feb 12 08:54:23 2012] Mean tdetx,y = (3991.50, 3722.00)
[Sun Feb 12 08:54:23 2012] chipx,y range = (347.00-382.00, 911.00-946.00)
[Sun Feb 12 08:54:23 2012] Size of ../../acisf13162/products/events/fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 13 counts
[Sun Feb 12 08:54:25 2012] Not generating rmf since there are only 25 counts
[Sun Feb 12 08:54:25 2012] arf not found, will run specextract
[Sun Feb 12 08:55:02 2012] ../../acisf13162/products/spectra/fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6.warf not found
[Sun Feb 12 08:55:02 2012] ../../acisf13162/products/spectra/fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6.wrmf not found
[Sun Feb 12 08:55:02 2012] Removal of ../../acisf13162/products/spectra/fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6.soff failed
[Sun Feb 12 09:12:28 2012] Spectrum 6 has only 25 counts, deleting rmf
[Sun Feb 12 09:12:28 2012] 192.069
[Sun Feb 12 09:59:54 2012] Updating aperture counts using extracted products
[Sun Feb 12 09:59:54 2012] Error reading totcts from fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Feb 12 09:59:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 09:59:55 2012] Using photon index=1.80, rate=0.00049, arf fullrun_ccd2_acisf13162_pi14-548_pass1_cl_src6.arf
[Sun Feb 12 09:59:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 09:59:55 2012] Updating source flux to 7.8e-15
[Sun Feb 12 10:00:08 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting