[Sun Feb 12 00:25:18 2012] Detection parameters:
  Position = (1129.4, 562.7) = 11 14 42.01 -61 9 59.3
  Extent = 1.8" x 1.1", rotation angle = 11 degrees
  Source counts = 24.3 +/- 5.5
  Background counts = 5.7
  Rate = 0.0005 +/- 0.0001

[Sun Feb 12 00:25:20 2012] Off-axis axis estimate = 5.95'
[Sun Feb 12 00:30:22 2012] Using EEF radius (= 1.61 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 00:30:22 2012] Initial guess for spatial extent in simple fitting = 1.61"
[Sun Feb 12 00:30:22 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.863
[Sun Feb 12 00:30:22 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 1.61"
[Sun Feb 12 01:07:25 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src6.ximg exists
[Sun Feb 12 01:07:25 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Feb 12 01:07:25 2012] Fit fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src6 appears to have run properly
[Sun Feb 12 01:07:26 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Feb 12 01:07:26 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Feb 12 01:07:26 2012] Fit fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Feb 12 04:20:59 2012] Spatial fit model total counts = 30.780300, observed total counts = 31.000000
[Sun Feb 12 04:20:59 2012] Offset between fit and detection position for source 6 = 2.428746 pixels
[Sun Feb 12 04:20:59 2012] 29.770870 total counts/ 6.990770 bgd. counts: snr = 8.615751
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.428746 pixels
  Position = (1131.8, 563.3) = 11 14 41.89 -61 9 59.2
  Extent = 1.3 (0.9-2.1)", rotation angle = 0
  Source counts = 22.8 +/- 5.5
  Background counts = 7.0
  Rate = 0.0004 +/- 0.0001
[Sun Feb 12 04:20:59 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 04:20:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 04:20:59 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 04:20:59 2012] Source does appear to be extended
[Sun Feb 12 04:20:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 04:21:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 04:21:49 2012] Initial guess for spatial extent in simple fitting = 1.31"
[Sun Feb 12 04:21:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.043
[Sun Feb 12 04:21:49 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 1.31"
[Sun Feb 12 04:57:51 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src6.ximg exists
[Sun Feb 12 04:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src6.csv
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Feb 12 04:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src6.csv
[Sun Feb 12 04:57:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Feb 12 04:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Feb 12 04:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Feb 12 04:57:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 08:05:18 2012] Spatial fit model total counts = 24.829700, observed total counts = 28.000000
[Sun Feb 12 08:05:18 2012] Offset between fit and detection position for source 6 = 0.689897 pixels
[Sun Feb 12 08:05:18 2012] 23.180100 total counts/ 0.000000 bgd. counts: snr = 383286160097406.375000
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.689897 pixels
  Position = (1132.5, 563.4) = 11 14 41.84 -61 9 59.1
  Extent = 1.3 (0.9-1.6)", rotation angle = 0
  Source counts = 23.2 +/- 4.8
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Sun Feb 12 08:05:18 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 08:05:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 08:05:18 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 08:05:18 2012] Source does appear to be extended
[Sun Feb 12 08:05:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 08:05:57 2012] Writing source region out to fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6_src.reg
[Sun Feb 12 08:05:57 2012] Extracting stamp from image fullrun_ccd0_acisf13162_pi14-548_cl_sm2.00.img.gz, (1074, 505) - (1191, 622)
[Sun Feb 12 08:05:57 2012] Writing fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6.gif
[Sun Feb 12 08:08:27 2012] Size of ../../acisf13162/products/events/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6_src.evt.gz[events] = 30 counts
[Sun Feb 12 08:08:27 2012] Mean chipx,y = (912.83, 341.93)
[Sun Feb 12 08:08:27 2012] Mean tdetx,y = (3402.93, 4219.17)
[Sun Feb 12 08:08:27 2012] chipx,y range = (897.00-936.00, 326.00-361.00)
[Sun Feb 12 08:08:27 2012] Size of ../../acisf13162/products/events/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 51 counts
[Sun Feb 12 08:08:28 2012] Not generating rmf since there are only 23 counts
[Sun Feb 12 08:08:28 2012] arf not found, will run specextract
[Sun Feb 12 08:08:49 2012] ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6.warf not found
[Sun Feb 12 08:08:49 2012] ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6.wrmf not found
[Sun Feb 12 08:08:49 2012] Removal of ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6.soff failed
[Sun Feb 12 08:26:03 2012] Spectrum 6 has only 23 counts, deleting rmf
[Sun Feb 12 08:26:03 2012] 172.719
[Sun Feb 12 09:59:52 2012] Updating aperture counts using extracted products
[Sun Feb 12 09:59:52 2012] Error reading totcts from fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Feb 12 09:59:53 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 09:59:53 2012] Using photon index=1.80, rate=0.000449, arf fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6.arf
[Sun Feb 12 09:59:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 09:59:53 2012] Updating source flux to 7.8e-15
[Sun Feb 12 10:00:02 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 10:00:03 2012] acisf13162/analysis//spectral/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete