[Sun Feb 12 00:25:19 2012] Detection parameters:
  Position = (1018.3, 335.7) = 11 14 49.55 -61 11 51.0
  Extent = 0.7" x 0.6", rotation angle = 67 degrees
  Source counts = 23.2 +/- 5.0
  Background counts = 1.8
  Rate = 0.0004 +/- 0.0001

[Sun Feb 12 00:25:20 2012] Off-axis axis estimate = 3.88'
[Sun Feb 12 00:30:22 2012] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 00:30:22 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Sun Feb 12 00:30:22 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Sun Feb 12 00:30:22 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 0.80"
[Sun Feb 12 01:07:25 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src17.ximg exists
[Sun Feb 12 01:07:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src17.csv
[Sun Feb 12 01:07:25 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src17_1.ximg exists
[Sun Feb 12 01:07:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src17.csv
[Sun Feb 12 01:07:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 01:07:26 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sun Feb 12 01:07:26 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Feb 12 01:07:26 2012] Fit fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Feb 12 04:20:59 2012] Spatial fit model total counts = 26.990400, observed total counts = 27.000000
[Sun Feb 12 04:20:59 2012] Offset between fit and detection position for source 21 = 0.643184 pixels
[Sun Feb 12 04:20:59 2012] 27.070480 total counts/ 2.776080 bgd. counts: snr = 14.581097
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.643184 pixels
  Position = (1018.8, 336.1) = 11 14 49.56 -61 11 51.0
  Extent = 0.9 (0.5-1.2)", rotation angle = 0
  Source counts = 24.3 +/- 5.2
  Background counts = 2.8
  Rate = 0.0005 +/- 0.0001
[Sun Feb 12 04:20:59 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 04:20:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 04:20:59 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 04:20:59 2012] Source does appear to be extended
[Sun Feb 12 04:20:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 04:21:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 04:21:49 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Sun Feb 12 04:21:49 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Sun Feb 12 04:21:49 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.86"
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src17.ximg exists
[Sun Feb 12 04:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src17.csv
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src17_1.ximg exists
[Sun Feb 12 04:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src17.csv
[Sun Feb 12 04:57:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Feb 12 04:57:52 2012] Fit fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Feb 12 08:05:18 2012] Spatial fit model total counts = 26.202000, observed total counts = 26.000000
[Sun Feb 12 08:05:18 2012] Offset between fit and detection position for source 21 = 0.167265 pixels
[Sun Feb 12 08:05:18 2012] 26.620120 total counts/ 1.199020 bgd. counts: snr = 23.215665
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.167265 pixels
  Position = (1018.7, 336.0) = 11 14 49.56 -61 11 51.1
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 25.4 +/- 5.2
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0001
[Sun Feb 12 08:05:18 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 08:05:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 08:05:18 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 08:05:18 2012] Source does appear to be extended
[Sun Feb 12 08:05:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 08:05:58 2012] Writing source region out to fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21_src.reg
[Sun Feb 12 08:05:58 2012] Extracting stamp from image fullrun_ccd0_acisf13162_pi14-548_cl_sm2.00.img.gz, (979, 296) - (1059, 376)
[Sun Feb 12 08:05:58 2012] Writing fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21.gif
[Sun Feb 12 08:16:49 2012] Size of ../../acisf13162/products/events/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21_src.evt.gz[events] = 26 counts
[Sun Feb 12 08:16:49 2012] Mean chipx,y = (986.58, 585.00)
[Sun Feb 12 08:16:49 2012] Mean tdetx,y = (3646.00, 4145.42)
[Sun Feb 12 08:16:49 2012] chipx,y range = (972.00-1006.00, 568.00-603.00)
[Sun Feb 12 08:16:49 2012] Size of ../../acisf13162/products/events/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 19 counts
[Sun Feb 12 08:16:50 2012] Not generating rmf since there are only 25 counts
[Sun Feb 12 08:16:50 2012] arf not found, will run specextract
[Sun Feb 12 08:17:15 2012] ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21.warf not found
[Sun Feb 12 08:17:15 2012] ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21.wrmf not found
[Sun Feb 12 08:17:15 2012] Removal of ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21.soff failed
[Sun Feb 12 08:26:03 2012] Spectrum 21 has only 25 counts, deleting rmf
[Sun Feb 12 08:26:03 2012] 190.127
[Sun Feb 12 09:59:53 2012] Updating aperture counts using extracted products
[Sun Feb 12 09:59:53 2012] Error reading totcts from fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21_src.pi.gz
[Sun Feb 12 09:59:53 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 09:59:53 2012] Using photon index=1.80, rate=0.000493, arf fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21.arf
[Sun Feb 12 09:59:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 09:59:53 2012] Updating source flux to 7.9e-15
[Sun Feb 12 10:00:02 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 10:00:03 2012] acisf13162/analysis//spectral/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete