[Sun Feb 12 00:25:19 2012] Detection parameters:
  Position = (832.1, 317.6) = 11 15 2.24 -61 11 59.9
  Extent = 0.6" x 0.5", rotation angle = 94 degrees
  Source counts = 12.3 +/- 3.7
  Background counts = 1.7
  Rate = 0.0002 +/- 7e-05

[Sun Feb 12 00:25:20 2012] Off-axis axis estimate = 3.35'
[Sun Feb 12 00:30:22 2012] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 00:30:22 2012] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Feb 12 00:30:22 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.894
[Sun Feb 12 00:30:22 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 0.66"
[Sun Feb 12 01:07:25 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src16.ximg exists
[Sun Feb 12 01:07:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src16.csv
[Sun Feb 12 01:07:25 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src16_1.ximg exists
[Sun Feb 12 01:07:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src16.csv
[Sun Feb 12 01:07:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13162_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 01:07:26 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Sun Feb 12 01:07:26 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Feb 12 01:07:26 2012] Fit fullrun_ccd0_acisf13162_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Feb 12 04:20:59 2012] Spatial fit model total counts = 22.924500, observed total counts = 23.000000
[Sun Feb 12 04:20:59 2012] Offset between fit and detection position for source 20 = 0.206384 pixels
[Sun Feb 12 04:20:59 2012] 22.672440 total counts/ 5.248040 bgd. counts: snr = 7.606052
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.206384 pixels
  Position = (831.9, 317.8) = 11 15 2.28 -61 12 0.1
  Extent = 0.9 (0.4-1.3)", rotation angle = 0
  Source counts = 17.4 +/- 4.8
  Background counts = 5.2
  Rate = 0.0003 +/- 9e-05
[Sun Feb 12 04:20:59 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 04:20:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 04:20:59 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 04:20:59 2012] Source does appear to be extended
[Sun Feb 12 04:20:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 04:21:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 04:21:49 2012] Initial guess for spatial extent in simple fitting = 0.88"
[Sun Feb 12 04:21:49 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Sun Feb 12 04:21:49 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 0.88"
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src16.ximg exists
[Sun Feb 12 04:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src16.csv
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src16_1.ximg exists
[Sun Feb 12 04:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src16.csv
[Sun Feb 12 04:57:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13162_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sun Feb 12 04:57:52 2012] fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Feb 12 04:57:52 2012] Fit fullrun_ccd0_acisf13162_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Feb 12 08:05:18 2012] Spatial fit model total counts = 23.111500, observed total counts = 23.000000
[Sun Feb 12 08:05:18 2012] Offset between fit and detection position for source 20 = 0.107946 pixels
[Sun Feb 12 08:05:18 2012] 22.778880 total counts/ 5.356980 bgd. counts: snr = 7.527236
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.107946 pixels
  Position = (832.0, 317.8) = 11 15 2.27 -61 12 0.1
  Extent = 0.9 (0.4-1.4)", rotation angle = 0
  Source counts = 17.4 +/- 4.8
  Background counts = 5.4
  Rate = 0.0003 +/- 9e-05
[Sun Feb 12 08:05:18 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 08:05:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 08:05:18 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 08:05:18 2012] Source does appear to be extended
[Sun Feb 12 08:05:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 08:05:58 2012] Writing source region out to fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20_src.reg
[Sun Feb 12 08:05:58 2012] Extracting stamp from image fullrun_ccd0_acisf13162_pi14-548_cl_sm2.00.img.gz, (792, 278) - (872, 358)
[Sun Feb 12 08:05:58 2012] Writing fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20.gif
[Sun Feb 12 08:16:15 2012] Size of ../../acisf13162/products/events/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20_src.evt.gz[events] = 21 counts
[Sun Feb 12 08:16:15 2012] Mean chipx,y = (858.67, 728.05)
[Sun Feb 12 08:16:15 2012] Mean tdetx,y = (3789.05, 4273.33)
[Sun Feb 12 08:16:15 2012] chipx,y range = (845.00-881.00, 707.00-746.00)
[Sun Feb 12 08:16:15 2012] Size of ../../acisf13162/products/events/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 57 counts
[Sun Feb 12 08:16:16 2012] Not generating rmf since there are only 17 counts
[Sun Feb 12 08:16:16 2012] arf not found, will run specextract
[Sun Feb 12 08:16:41 2012] ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20.warf not found
[Sun Feb 12 08:16:41 2012] ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20.wrmf not found
[Sun Feb 12 08:16:41 2012] Removal of ../../acisf13162/products/spectra/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20.soff failed
[Sun Feb 12 08:26:03 2012] Spectrum 20 has only 17 counts, deleting rmf
[Sun Feb 12 08:26:03 2012] 194.296
[Sun Feb 12 09:59:53 2012] Updating aperture counts using extracted products
[Sun Feb 12 09:59:53 2012] Error reading totcts from fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20_src.pi.gz
[Sun Feb 12 09:59:53 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 09:59:53 2012] Using photon index=1.80, rate=0.000338, arf fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20.arf
[Sun Feb 12 09:59:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 09:59:53 2012] Updating source flux to 5.3e-15
[Sun Feb 12 10:00:02 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 10:00:03 2012] acisf13162/analysis//spectral/fullrun_ccd0_acisf13162_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete