[Mon Nov 21 20:36:35 2011] Detection parameters:
  Position = (381.3, 925.2) = 12 15 23.17 -65 31 48.2
  Extent = 0.5" x 0.5", rotation angle = 160 degrees
  Source counts = 11.9 +/- 5.4
  Background counts = 17.1
  Rate = 0.0003 +/- 0.0002

[Mon Nov 21 20:36:36 2011] Off-axis axis estimate = 5.28'
[Mon Nov 21 21:42:13 2011] Using EEF radius (= 1.30 ")to estimate initial spatial extent for simple fitting
[Mon Nov 21 21:42:13 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Mon Nov 21 21:42:13 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.917
[Mon Nov 21 21:42:13 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 1.30"
[Mon Nov 21 22:17:40 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src30.ximg exists
[Mon Nov 21 22:17:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src30.csv
[Mon Nov 21 22:17:40 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src30_1.ximg exists
[Mon Nov 21 22:17:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src30.csv
[Mon Nov 21 22:17:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 21 22:17:40 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Mon Nov 21 22:17:40 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Nov 21 22:17:40 2011] Fit fullrun_ccd3_acisf13160_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Nov 21 22:17:54 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 14.562931 pixels away
[Mon Nov 21 22:17:54 2011] Vigneting correction estimate = 1.000000
[Mon Nov 21 22:17:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 21 22:17:54 2011] Assessing source extent using major
[Mon Nov 21 22:17:54 2011] Source does appear to be extended
[Mon Nov 21 22:17:54 2011] Computing asymmetry using major and minor axis, asym = 1.08
[Mon Nov 21 23:12:05 2011] Using EEF radius (= 1.30 ")to estimate initial spatial extent for simple fitting
[Mon Nov 21 23:12:05 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Mon Nov 21 23:12:05 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.917
[Mon Nov 21 23:12:05 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 1.30"
[Mon Nov 21 23:48:41 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src28.ximg exists
[Mon Nov 21 23:48:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src28.csv
[Mon Nov 21 23:48:41 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src28_1.ximg exists
[Mon Nov 21 23:48:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src28.csv
[Mon Nov 21 23:48:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 21 23:48:41 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Mon Nov 21 23:48:41 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Nov 21 23:48:41 2011] Fit fullrun_ccd3_acisf13160_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Nov 21 23:48:53 2011] Spatial fit model total counts = 86.872100, observed total counts = 87.000000
[Mon Nov 21 23:48:53 2011] Offset between fit and detection position for source 46 = 5.220266 pixels
[Mon Nov 21 23:48:53 2011] 78.635000 total counts/ 22.088900 bgd. counts: snr = 12.031385
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 5.220266 pixels
  Position = (384.1, 929.6) = 12 15 22.99 -65 31 46.2
  Extent = 2.6 (1.8-5.2)", rotation angle = 0
  Source counts = 56.5 +/- 8.9
  Background counts = 22.1
  Rate = 0.002 +/- 0.0003
[Mon Nov 21 23:48:53 2011] Vigneting correction estimate = 1.000000
[Mon Nov 21 23:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 21 23:48:53 2011] Assessing source extent using major axis lower bound
[Mon Nov 21 23:48:53 2011] Source does appear to be extended
[Mon Nov 21 23:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 22 00:16:07 2011] Writing source region out to fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46_src.reg
[Tue Nov 22 00:16:07 2011] Extracting stamp from image fullrun_ccd3_acisf13160_pi14-548_cl_sm2.00.img.gz, (266, 811) - (503, 1048)
[Tue Nov 22 00:16:07 2011] Writing fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46.gif
[Tue Nov 22 00:32:07 2011] Size of ../../acisf13160/products/events/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46_src.evt.gz[events] = 435 counts
[Tue Nov 22 00:32:07 2011] Mean chipx,y = (896.06, 388.84)
[Tue Nov 22 00:32:07 2011] Mean tdetx,y = (4743.16, 3957.06)
[Tue Nov 22 00:32:07 2011] chipx,y range = (858.00-929.00, 355.00-426.00)
[Tue Nov 22 00:32:07 2011] Size of ../../acisf13160/products/events/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46_bgd.evt.gz[events] = 3058 counts
[Tue Nov 22 00:32:08 2011] Not generating rmf since there are only 56 counts
[Tue Nov 22 00:32:08 2011] arf not found, will run specextract
[Tue Nov 22 00:32:35 2011] ../../acisf13160/products/spectra/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46.warf not found
[Tue Nov 22 00:32:35 2011] ../../acisf13160/products/spectra/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46.wrmf not found
[Tue Nov 22 00:32:35 2011] Removal of ../../acisf13160/products/spectra/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46.soff failed
[Tue Nov 22 00:33:24 2011] Spectrum 46 has only 57 counts, deleting rmf
[Tue Nov 22 00:33:24 2011] 187.949
[Tue Nov 22 00:33:29 2011] Updating aperture counts using extracted products
[Tue Nov 22 00:33:29 2011] Error reading totcts from fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46_src.pi.gz
[Tue Nov 22 00:33:29 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 22 00:33:29 2011] Using photon index=1.80, rate=0.00162, arf fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src46.arf
[Tue Nov 22 00:33:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov 22 00:33:29 2011] Updating source flux to 2.2e-14
[Tue Nov 22 00:33:35 2011] Source 46 has fewer than 100.000000 counts, skipping spectral fitting