[Mon Nov 21 20:36:35 2011] Detection parameters:
  Position = (961.0, 533.8) = 12 14 37.25 -65 35 1.0
  Extent = 1.4" x 0.7", rotation angle = 24 degrees
  Source counts = 20.1 +/- 4.8
  Background counts = 2.9
  Rate = 0.0006 +/- 0.0001

[Mon Nov 21 20:36:36 2011] Off-axis axis estimate = 6.83'
[Mon Nov 21 21:42:13 2011] Using EEF radius (= 2.08 ")to estimate initial spatial extent for simple fitting
[Mon Nov 21 21:42:13 2011] Initial guess for spatial extent in simple fitting = 2.08"
[Mon Nov 21 21:42:13 2011] source mask rpix=4.2, npix_max = 89, mask sum = 100, frac = 1.120
[Mon Nov 21 21:42:13 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 2.08"
[Mon Nov 21 22:17:40 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src16.ximg exists
[Mon Nov 21 22:17:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src16.csv
[Mon Nov 21 22:17:40 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src16_1.ximg exists
[Mon Nov 21 22:17:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src16.csv
[Mon Nov 21 22:17:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13160_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 21 22:17:40 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Mon Nov 21 22:17:40 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Nov 21 22:17:40 2011] Fit fullrun_ccd3_acisf13160_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Nov 21 22:17:54 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 23.102739 pixels away
[Mon Nov 21 22:17:54 2011] Vigneting correction estimate = 1.000000
[Mon Nov 21 22:17:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 21 22:17:54 2011] Assessing source extent using major
[Mon Nov 21 22:17:54 2011] Source does appear to be extended
[Mon Nov 21 22:17:54 2011] Computing asymmetry using major and minor axis, asym = 2.17
[Mon Nov 21 22:17:54 2011] Source is asymmetric
[Mon Nov 21 23:12:05 2011] Using EEF radius (= 2.08 ")to estimate initial spatial extent for simple fitting
[Mon Nov 21 23:12:05 2011] Initial guess for spatial extent in simple fitting = 2.08"
[Mon Nov 21 23:12:05 2011] source mask rpix=4.2, npix_max = 89, mask sum = 100, frac = 1.120
[Mon Nov 21 23:12:05 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 2.08"
[Mon Nov 21 23:48:41 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src15.ximg exists
[Mon Nov 21 23:48:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src15.csv
[Mon Nov 21 23:48:41 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Nov 21 23:48:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src15.csv
[Mon Nov 21 23:48:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13160_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 21 23:48:41 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Nov 21 23:48:41 2011] fullrun_ccd3_acisf13160_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Nov 21 23:48:41 2011] Fit fullrun_ccd3_acisf13160_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Nov 21 23:48:53 2011] Spatial fit model total counts = 26.742200, observed total counts = 27.000000
[Mon Nov 21 23:48:53 2011] Offset between fit and detection position for source 11 = 1.199398 pixels
[Mon Nov 21 23:48:53 2011] 27.423500 total counts/ 11.373000 bgd. counts: snr = 4.759387
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.199398 pixels
  Position = (959.8, 533.7) = 12 14 37.39 -65 35 1.3
  Extent = 0.9 (0.5-1.2)", rotation angle = 0
  Source counts = 16.1 +/- 5.2
  Background counts = 11.4
  Rate = 0.0005 +/- 0.0001
[Mon Nov 21 23:48:53 2011] Vigneting correction estimate = 1.000000
[Mon Nov 21 23:48:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 21 23:48:53 2011] Assessing source extent using major axis lower bound
[Mon Nov 21 23:48:53 2011] Source does appear to be extended
[Mon Nov 21 23:48:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 22 00:16:07 2011] Writing source region out to fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11_src.reg
[Tue Nov 22 00:16:07 2011] Extracting stamp from image fullrun_ccd3_acisf13160_pi14-548_cl_sm2.00.img.gz, (920, 493) - (1000, 574)
[Tue Nov 22 00:16:07 2011] Writing fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11.gif
[Tue Nov 22 00:24:21 2011] Size of ../../acisf13160/products/events/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11_src.evt.gz[events] = 20 counts
[Tue Nov 22 00:24:21 2011] Mean chipx,y = (225.80, 602.75)
[Tue Nov 22 00:24:21 2011] Mean tdetx,y = (4529.25, 3286.80)
[Tue Nov 22 00:24:21 2011] chipx,y range = (210.00-243.00, 583.00-621.00)
[Tue Nov 22 00:24:21 2011] Size of ../../acisf13160/products/events/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 27 counts
[Tue Nov 22 00:24:22 2011] Not generating rmf since there are only 16 counts
[Tue Nov 22 00:24:22 2011] arf not found, will run specextract
[Tue Nov 22 00:24:52 2011] ../../acisf13160/products/spectra/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11.warf not found
[Tue Nov 22 00:24:52 2011] ../../acisf13160/products/spectra/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11.wrmf not found
[Tue Nov 22 00:24:52 2011] Removal of ../../acisf13160/products/spectra/fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11.soff failed
[Tue Nov 22 00:33:24 2011] Spectrum 11 has only 16 counts, deleting rmf
[Tue Nov 22 00:33:24 2011] 172.233
[Tue Nov 22 00:33:29 2011] Updating aperture counts using extracted products
[Tue Nov 22 00:33:29 2011] Error reading totcts from fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11_src.pi.gz
[Tue Nov 22 00:33:29 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 22 00:33:29 2011] Using photon index=1.80, rate=0.000459, arf fullrun_ccd3_acisf13160_pi14-548_pass1_cl_src11.arf
[Tue Nov 22 00:33:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov 22 00:33:29 2011] Updating source flux to 6.8e-15
[Tue Nov 22 00:33:35 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting