[Mon Nov 21 20:35:20 2011] Detection parameters:
  Position = (1045.4, 1052.0) = 12 15 20.38 -65 24 3.4
  Extent = 1.1" x 0.8", rotation angle = 99 degrees
  Source counts = 59.1 +/- 8.5
  Background counts = 12.9
  Rate = 0.002 +/- 0.0002

[Mon Nov 21 20:35:21 2011] Off-axis axis estimate = 5.53'
[Mon Nov 21 21:05:17 2011] Using EEF radius (= 1.41 ")to estimate initial spatial extent for simple fitting
[Mon Nov 21 21:05:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 21 21:05:17 2011] Initial guess for spatial extent in simple fitting = 1.41"
[Mon Nov 21 21:05:17 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.930
[Mon Nov 21 21:05:17 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.41"
[Mon Nov 21 21:34:11 2011] fullrun_ccd1_acisf13160_pi14-548_cl_pass0_src3.ximg exists
[Mon Nov 21 21:34:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13160_pi14-548_cl_pass0_src3.csv
[Mon Nov 21 21:34:11 2011] fullrun_ccd1_acisf13160_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Nov 21 21:34:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13160_pi14-548_cl_pass0_src3.csv
[Mon Nov 21 21:34:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13160_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13160_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 21 21:34:11 2011] fullrun_ccd1_acisf13160_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Nov 21 21:34:11 2011] fullrun_ccd1_acisf13160_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Nov 21 21:34:11 2011] Fit fullrun_ccd1_acisf13160_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Nov 21 22:17:49 2011] Spatial fit model total counts = 84.999700, observed total counts = 85.000000
[Mon Nov 21 22:17:49 2011] Offset between fit and detection position for source 2 = 0.276005 pixels
[Mon Nov 21 22:17:49 2011] 85.910400 total counts/ 44.464900 bgd. counts: snr = 6.215395
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.276005 pixels
  Position = (1045.7, 1052.0) = 12 15 20.39 -65 24 3.6
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 41.4 +/- 9.3
  Background counts = 44.5
  Rate = 0.001 +/- 0.0003
[Mon Nov 21 22:17:49 2011] Vigneting correction estimate = 1.000000
[Mon Nov 21 22:17:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 21 22:17:49 2011] Assessing source extent using major axis lower bound
[Mon Nov 21 22:17:49 2011] Source does appear to be extended
[Mon Nov 21 22:17:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 21 22:41:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 21 22:41:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 21 22:41:46 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Nov 21 22:41:46 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.140
[Mon Nov 21 22:41:46 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.68"
[Mon Nov 21 23:06:22 2011] fullrun_ccd1_acisf13160_pi14-548_cl_pass1_src3.ximg exists
[Mon Nov 21 23:06:22 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf13160_pi14-548_cl_pass1_src3.csv
[Mon Nov 21 23:06:22 2011] fullrun_ccd1_acisf13160_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Nov 21 23:06:22 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf13160_pi14-548_cl_pass1_src3.csv
[Mon Nov 21 23:06:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13160_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13160_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 21 23:06:23 2011] fullrun_ccd1_acisf13160_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Nov 21 23:06:23 2011] fullrun_ccd1_acisf13160_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Nov 21 23:06:23 2011] Fit fullrun_ccd1_acisf13160_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Nov 21 23:48:48 2011] Warning, spatial fit 3 centroid is now closest to src. 4
[Mon Nov 21 23:48:48 2011] Vigneting correction estimate = 1.000000
[Mon Nov 21 23:48:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 21 23:48:48 2011] Assessing source extent using major axis lower bound
[Mon Nov 21 23:48:48 2011] Source does appear to be extended
[Mon Nov 21 23:48:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 21 23:57:16 2011] Writing source region out to fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2_src.reg
[Mon Nov 21 23:57:16 2011] Extracting stamp from image fullrun_ccd1_acisf13160_pi14-548_cl_sm2.00.img.gz, (1015, 1021) - (1077, 1083)
[Mon Nov 21 23:57:16 2011] Writing fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2.gif
[Mon Nov 21 23:58:26 2011] Size of ../../acisf13160/products/events/fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2_src.evt.gz[events] = 62 counts
[Mon Nov 21 23:58:26 2011] Mean chipx,y = (572.71, 993.56)
[Mon Nov 21 23:58:26 2011] Mean tdetx,y = (4138.44, 4679.71)
[Mon Nov 21 23:58:26 2011] chipx,y range = (554.00-595.00, 975.00-1008.00)
[Mon Nov 21 23:58:26 2011] Size of ../../acisf13160/products/events/fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 86 counts
[Mon Nov 21 23:58:28 2011] Not generating rmf since there are only 41 counts
[Mon Nov 21 23:58:28 2011] arf not found, will run specextract
[Mon Nov 21 23:58:54 2011] ../../acisf13160/products/spectra/fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2.warf not found
[Mon Nov 21 23:58:54 2011] ../../acisf13160/products/spectra/fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2.wrmf not found
[Mon Nov 21 23:58:54 2011] Removal of ../../acisf13160/products/spectra/fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2.soff failed
[Tue Nov 22 00:08:36 2011] Spectrum 2 has only 41 counts, deleting rmf
[Tue Nov 22 00:08:36 2011] 171.434
[Tue Nov 22 00:33:28 2011] Updating aperture counts using extracted products
[Tue Nov 22 00:33:28 2011] Error reading totcts from fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Nov 22 00:33:28 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 22 00:33:28 2011] Using photon index=1.80, rate=0.00119, arf fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2.arf
[Tue Nov 22 00:33:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov 22 00:33:28 2011] Updating source flux to 1.8e-14
[Tue Nov 22 00:33:33 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Nov 22 00:33:34 2011] acisf13160/analysis//spectral/fullrun_ccd1_acisf13160_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete