[Sun Feb 12 23:12:53 2012] Detection parameters:
  Position = (893.5, 803.6) = 12 14 39.96 -65 33 3.6
  Extent = 0.6" x 0.5", rotation angle = 47 degrees
  Source counts = 82.1 +/- 11.6
  Background counts = 52.9
  Rate = 0.0009 +/- 0.0001

[Sun Feb 12 23:12:54 2012] Off-axis axis estimate = 4.89'
[Mon Feb 13 01:30:14 2012] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 01:30:14 2012] Initial guess for spatial extent in simple fitting = 1.14"
[Mon Feb 13 01:30:14 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.793
[Mon Feb 13 01:30:14 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 1.14"
[Mon Feb 13 02:47:07 2012] fullrun_ccd3_acisf13158_pi14-548_cl_pass0_src5.ximg exists
[Mon Feb 13 02:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13158_pi14-548_cl_pass0_src5.csv
[Mon Feb 13 02:47:07 2012] fullrun_ccd3_acisf13158_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Feb 13 02:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13158_pi14-548_cl_pass0_src5.csv
[Mon Feb 13 02:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13158_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13158_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 02:47:08 2012] fullrun_ccd3_acisf13158_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Feb 13 02:47:08 2012] fullrun_ccd3_acisf13158_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Feb 13 02:47:08 2012] Fit fullrun_ccd3_acisf13158_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Feb 13 02:47:35 2012] Source 19 is offset by 7.891439 and 5.335142 pixels which is larger than
2 X fitted extent = 2.111821 x 2.111821, not incorporating fit results
[Mon Feb 13 02:47:35 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 02:47:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 02:47:35 2012] Assessing source extent using major
[Mon Feb 13 02:47:35 2012] Source does appear to be extended
[Mon Feb 13 02:47:35 2012] Computing asymmetry using major and minor axis, asym = 1.13
[Mon Feb 13 04:41:05 2012] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 04:41:05 2012] Initial guess for spatial extent in simple fitting = 1.14"
[Mon Feb 13 04:41:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.793
[Mon Feb 13 04:41:05 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 1.14"
[Mon Feb 13 05:49:04 2012] fullrun_ccd3_acisf13158_pi14-548_cl_pass1_src5.ximg exists
[Mon Feb 13 05:49:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13158_pi14-548_cl_pass1_src5.csv
[Mon Feb 13 05:49:04 2012] fullrun_ccd3_acisf13158_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Feb 13 05:49:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13158_pi14-548_cl_pass1_src5.csv
[Mon Feb 13 05:49:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13158_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13158_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 05:49:04 2012] fullrun_ccd3_acisf13158_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Feb 13 05:49:04 2012] fullrun_ccd3_acisf13158_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Feb 13 05:49:04 2012] Fit fullrun_ccd3_acisf13158_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Feb 13 05:49:29 2012] Spatial fit model total counts = 441.624000, observed total counts = 442.000000
[Mon Feb 13 05:49:29 2012] Offset between fit and detection position for source 19 = 4.107828 pixels
[Mon Feb 13 05:49:29 2012] 429.488000 total counts/ 299.712000 bgd. counts: snr = 7.496220
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 4.107828 pixels
  Position = (896.4, 806.5) = 12 14 39.77 -65 33 2.5
  Extent = 2.0 (1.5-2.3)", rotation angle = 0
  Source counts = 129.8 +/- 20.7
  Background counts = 299.7
  Rate = 0.001 +/- 0.0002
[Mon Feb 13 05:49:29 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:49:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:49:29 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 05:49:29 2012] Source does appear to be extended
[Mon Feb 13 05:49:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 06:43:36 2012] Writing source region out to fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19_src.reg
[Mon Feb 13 06:43:36 2012] Extracting stamp from image fullrun_ccd3_acisf13158_pi14-548_cl_sm2.00.img.gz, (805, 715) - (988, 898)
[Mon Feb 13 06:43:36 2012] Writing fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19.gif
[Mon Feb 13 06:46:10 2012] Size of ../../acisf13158/products/events/fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19_src.evt.gz[events] = 1149 counts
[Mon Feb 13 06:46:10 2012] Mean chipx,y = (454.39, 690.48)
[Mon Feb 13 06:46:10 2012] Mean tdetx,y = (4441.52, 3515.39)
[Mon Feb 13 06:46:10 2012] chipx,y range = (424.00-487.00, 658.00-723.00)
[Mon Feb 13 06:46:10 2012] Size of ../../acisf13158/products/events/fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 3606 counts
[Mon Feb 13 06:46:11 2012] rmf not found, will run specextract
[Mon Feb 13 06:46:11 2012] arf not found, will run specextract
[Mon Feb 13 06:46:45 2012] ../../acisf13158/products/spectra/fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19.warf not found
[Mon Feb 13 06:46:45 2012] ../../acisf13158/products/spectra/fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19.wrmf not found
[Mon Feb 13 06:46:45 2012] Removal of ../../acisf13158/products/spectra/fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19.soff failed
[Mon Feb 13 07:13:06 2012] Keeping rmf generated by specextract
[Mon Feb 13 07:13:06 2012] 183.241
[Mon Feb 13 07:13:13 2012] Updating aperture counts using extracted products
[Mon Feb 13 07:13:13 2012] Error reading totcts from fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19_src.pi.gz
[Mon Feb 13 07:13:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 07:13:14 2012] Using photon index=1.80, rate=0.00138, arf fullrun_ccd3_acisf13158_pi14-548_pass1_cl_src19.arf
[Mon Feb 13 07:13:14 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 13 07:13:14 2012] Updating source flux to 1.9e-14
[Mon Feb 13 07:14:34 2012] Flag b found in src. 19 procflags, skipping spectral fitting