[Sun Feb 12 23:10:51 2012] Detection parameters:
  Position = (1293.0, 666.5) = 12 14 2.42 -65 22 6.5
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 18.4 +/- 5.2
  Background counts = 8.6
  Rate = 0.0002 +/- 6e-05

[Sun Feb 12 23:10:51 2012] Off-axis axis estimate = 7.58'
[Sun Feb 12 23:21:50 2012] Using EEF radius (= 2.55 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 23:21:50 2012] Initial guess for spatial extent in simple fitting = 2.55"
[Sun Feb 12 23:21:50 2012] source mask rpix=5.2, npix_max = 128, mask sum = 122, frac = 0.946
[Sun Feb 12 23:21:50 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 2.55"
[Mon Feb 13 00:11:24 2012] fullrun_ccd0_acisf13158_pi14-548_cl_pass0_src28.ximg exists
[Mon Feb 13 00:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13158_pi14-548_cl_pass0_src28.csv
[Mon Feb 13 00:11:24 2012] fullrun_ccd0_acisf13158_pi14-548_cl_pass0_src28_1.ximg exists
[Mon Feb 13 00:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13158_pi14-548_cl_pass0_src28.csv
[Mon Feb 13 00:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13158_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13158_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 00:11:25 2012] fullrun_ccd0_acisf13158_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon Feb 13 00:11:25 2012] fullrun_ccd0_acisf13158_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Feb 13 00:11:25 2012] Fit fullrun_ccd0_acisf13158_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Feb 13 02:47:18 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 28.934900 pixels away
[Mon Feb 13 02:47:18 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 02:47:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 02:47:18 2012] Assessing source extent using major
[Mon Feb 13 02:47:18 2012] Source does appear to be extended
[Mon Feb 13 02:47:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 02:48:00 2012] Using EEF radius (= 2.55 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 02:48:00 2012] Initial guess for spatial extent in simple fitting = 2.55"
[Mon Feb 13 02:48:00 2012] source mask rpix=5.2, npix_max = 128, mask sum = 122, frac = 0.946
[Mon Feb 13 02:48:00 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 2.55"
[Mon Feb 13 03:31:21 2012] fullrun_ccd0_acisf13158_pi14-548_cl_pass1_src25.ximg exists
[Mon Feb 13 03:31:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13158_pi14-548_cl_pass1_src25.csv
[Mon Feb 13 03:31:21 2012] fullrun_ccd0_acisf13158_pi14-548_cl_pass1_src25_1.ximg exists
[Mon Feb 13 03:31:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13158_pi14-548_cl_pass1_src25.csv
[Mon Feb 13 03:31:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13158_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13158_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 03:31:21 2012] fullrun_ccd0_acisf13158_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Mon Feb 13 03:31:21 2012] fullrun_ccd0_acisf13158_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Feb 13 03:31:21 2012] Fit fullrun_ccd0_acisf13158_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Feb 13 05:49:13 2012] Spatial fit model total counts = 73.998400, observed total counts = 74.000000
[Mon Feb 13 05:49:13 2012] Offset between fit and detection position for source 28 = 2.624188 pixels
[Mon Feb 13 05:49:13 2012] 73.947800 total counts/ 48.199800 bgd. counts: snr = 3.708693
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.624188 pixels
  Position = (1294.7, 668.5) = 12 14 2.33 -65 22 5.7
  Extent = 1.8 (1.2-3.1)", rotation angle = 0
  Source counts = 25.7 +/- 8.6
  Background counts = 48.2
  Rate = 0.0003 +/- 9e-05
[Mon Feb 13 05:49:13 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:49:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:49:13 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 05:49:13 2012] Source does appear to be extended
[Mon Feb 13 05:49:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 05:49:56 2012] Writing source region out to fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28_src.reg
[Mon Feb 13 05:49:56 2012] Extracting stamp from image fullrun_ccd0_acisf13158_pi14-548_cl_sm2.00.img.gz, (1211, 585) - (1378, 752)
[Mon Feb 13 05:49:56 2012] Writing fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28.gif
[Mon Feb 13 06:01:38 2012] Size of ../../acisf13158/products/events/fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28_src.evt.gz[events] = 51 counts
[Mon Feb 13 06:01:38 2012] Mean chipx,y = (937.20, 132.94)
[Mon Feb 13 06:01:38 2012] Mean tdetx,y = (3193.94, 4194.80)
[Mon Feb 13 06:01:38 2012] chipx,y range = (910.00-960.00, 109.00-157.00)
[Mon Feb 13 06:01:38 2012] Size of ../../acisf13158/products/events/fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 220 counts
[Mon Feb 13 06:01:39 2012] Not generating rmf since there are only 25 counts
[Mon Feb 13 06:01:39 2012] arf not found, will run specextract
[Mon Feb 13 06:01:52 2012] ../../acisf13158/products/spectra/fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28.warf not found
[Mon Feb 13 06:01:52 2012] ../../acisf13158/products/spectra/fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28.wrmf not found
[Mon Feb 13 06:01:52 2012] Removal of ../../acisf13158/products/spectra/fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28.soff failed
[Mon Feb 13 06:05:36 2012] Spectrum 28 has only 26 counts, deleting rmf
[Mon Feb 13 06:05:36 2012] 163.002
[Mon Feb 13 07:13:11 2012] Updating aperture counts using extracted products
[Mon Feb 13 07:13:11 2012] Error reading totcts from fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28_src.pi.gz
[Mon Feb 13 07:13:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 07:13:11 2012] Using photon index=1.80, rate=0.000274, arf fullrun_ccd0_acisf13158_pi14-548_pass1_cl_src28.arf
[Mon Feb 13 07:13:11 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 13 07:13:11 2012] Updating source flux to 4.3e-15
[Mon Feb 13 07:13:19 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting