[Mon Nov 28 14:49:07 2011] Detection parameters:
  Position = (562.3, 1110.0) = 12 15 9.05 -65 30 17.9
  Extent = 0.5" x 0.5", rotation angle = 11 degrees
  Source counts = 46.7 +/- 7.1
  Background counts = 3.3
  Rate = 0.001 +/- 0.0002

[Mon Nov 28 14:49:08 2011] Off-axis axis estimate = 3.19'
[Mon Nov 28 15:55:18 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 15:55:18 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Mon Nov 28 15:55:18 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.970
[Mon Nov 28 15:55:18 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.62"
[Mon Nov 28 16:27:05 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src4.ximg exists
[Mon Nov 28 16:27:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src4.csv
[Mon Nov 28 16:27:05 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src4_1.ximg exists
[Mon Nov 28 16:27:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src4.csv
[Mon Nov 28 16:27:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 16:27:05 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Mon Nov 28 16:27:05 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Nov 28 16:27:05 2011] Fit fullrun_ccd3_acisf13157_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Nov 28 16:27:19 2011] Spatial fit model total counts = 60.999800, observed total counts = 61.000000
[Mon Nov 28 16:27:19 2011] Offset between fit and detection position for source 3 = 0.706104 pixels
[Mon Nov 28 16:27:19 2011] 60.760200 total counts/ 17.451800 bgd. counts: snr = 10.366974
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.706104 pixels
  Position = (562.8, 1110.5) = 12 15 9.05 -65 30 17.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 43.3 +/- 7.8
  Background counts = 17.5
  Rate = 0.001 +/- 0.0002
[Mon Nov 28 16:27:19 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 16:27:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 16:27:19 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 16:27:19 2011] Source does appear to be extended
[Mon Nov 28 16:27:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 17:25:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 17:25:02 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Nov 28 17:25:02 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.133
[Mon Nov 28 17:25:02 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.45"
[Mon Nov 28 17:54:36 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src4.ximg exists
[Mon Nov 28 17:54:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src4.csv
[Mon Nov 28 17:54:36 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src4_1.ximg exists
[Mon Nov 28 17:54:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src4.csv
[Mon Nov 28 17:54:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:54:37 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Mon Nov 28 17:54:37 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Nov 28 17:54:37 2011] Fit fullrun_ccd3_acisf13157_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Nov 28 17:54:48 2011] Spatial fit model total counts = 59.948800, observed total counts = 60.000000
[Mon Nov 28 17:54:48 2011] Offset between fit and detection position for source 3 = 0.008521 pixels
[Mon Nov 28 17:54:48 2011] 59.423200 total counts/ 16.266200 bgd. counts: snr = 10.700602
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.008521 pixels
  Position = (562.8, 1110.5) = 12 15 9.05 -65 30 17.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 43.2 +/- 7.7
  Background counts = 16.3
  Rate = 0.001 +/- 0.0002
[Mon Nov 28 17:54:48 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:54:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:54:48 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:54:48 2011] Source does appear to be extended
[Mon Nov 28 17:54:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 18:19:16 2011] Writing source region out to fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3_src.reg
[Mon Nov 28 18:19:16 2011] Extracting stamp from image fullrun_ccd3_acisf13157_pi14-548_cl_sm2.00.img.gz, (543, 1090) - (583, 1131)
[Mon Nov 28 18:19:16 2011] Writing fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3.gif
[Mon Nov 28 18:20:50 2011] Size of ../../acisf13157/products/events/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3_src.evt.gz[events] = 47 counts
[Mon Nov 28 18:20:50 2011] Mean chipx,y = (925.23, 644.19)
[Mon Nov 28 18:20:50 2011] Mean tdetx,y = (4487.81, 3986.23)
[Mon Nov 28 18:20:50 2011] chipx,y range = (910.00-944.00, 627.00-661.00)
[Mon Nov 28 18:20:50 2011] Size of ../../acisf13157/products/events/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 28 counts
[Mon Nov 28 18:20:51 2011] Not generating rmf since there are only 43 counts
[Mon Nov 28 18:20:51 2011] arf not found, will run specextract
[Mon Nov 28 18:21:16 2011] ../../acisf13157/products/spectra/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3.warf not found
[Mon Nov 28 18:21:16 2011] ../../acisf13157/products/spectra/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3.wrmf not found
[Mon Nov 28 18:21:16 2011] Removal of ../../acisf13157/products/spectra/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3.soff failed
[Mon Nov 28 18:33:26 2011] Spectrum 3 has only 43 counts, deleting rmf
[Mon Nov 28 18:33:26 2011] 197.736
[Mon Nov 28 18:33:29 2011] Updating aperture counts using extracted products
[Mon Nov 28 18:33:29 2011] Error reading totcts from fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Nov 28 18:33:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 18:33:30 2011] Using photon index=1.80, rate=0.00123, arf fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3.arf
[Mon Nov 28 18:33:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 28 18:33:30 2011] Updating source flux to 1.6e-14
[Mon Nov 28 18:33:50 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Nov 28 18:33:51 2011] acisf13157/analysis//spectral/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete