[Mon Nov 28 14:49:07 2011] Detection parameters:
  Position = (473.5, 873.6) = 12 15 16.12 -65 32 14.2
  Extent = 0.6" x 0.5", rotation angle = 158 degrees
  Source counts = 24.8 +/- 6.5
  Background counts = 17.2
  Rate = 0.0007 +/- 0.0002

[Mon Nov 28 14:49:08 2011] Off-axis axis estimate = 5.10'
[Mon Nov 28 15:55:18 2011] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 15:55:18 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Mon Nov 28 15:55:18 2011] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.846
[Mon Nov 28 15:55:18 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.22"
[Mon Nov 28 16:27:05 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src9.ximg exists
[Mon Nov 28 16:27:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src9.csv
[Mon Nov 28 16:27:05 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Nov 28 16:27:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src9.csv
[Mon Nov 28 16:27:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13157_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 16:27:05 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Nov 28 16:27:05 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Nov 28 16:27:05 2011] Fit fullrun_ccd3_acisf13157_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Nov 28 16:27:19 2011] Source 19 is offset by -9.213435 and 2.556675 pixels which is larger than
2 X fitted extent = 1.240398 x 1.240398, not incorporating fit results
[Mon Nov 28 16:27:19 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 16:27:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 16:27:19 2011] Assessing source extent using major
[Mon Nov 28 16:27:19 2011] Source does appear to be extended
[Mon Nov 28 16:27:19 2011] Computing asymmetry using major and minor axis, asym = 1.20
[Mon Nov 28 17:25:02 2011] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 17:25:02 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Mon Nov 28 17:25:02 2011] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.846
[Mon Nov 28 17:25:02 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.22"
[Mon Nov 28 17:54:36 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src9.ximg exists
[Mon Nov 28 17:54:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src9.csv
[Mon Nov 28 17:54:36 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Nov 28 17:54:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src9.csv
[Mon Nov 28 17:54:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13157_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:54:37 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Nov 28 17:54:37 2011] fullrun_ccd3_acisf13157_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Nov 28 17:54:37 2011] Fit fullrun_ccd3_acisf13157_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Nov 28 17:54:48 2011] Spatial fit model total counts = 123.984000, observed total counts = 124.000000
[Mon Nov 28 17:54:48 2011] Offset between fit and detection position for source 19 = 5.289663 pixels
[Mon Nov 28 17:54:48 2011] 123.299200 total counts/ 68.844600 bgd. counts: snr = 6.562958
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 5.289663 pixels
  Position = (470.1, 877.6) = 12 15 16.42 -65 32 12.4
  Extent = 2.3 (2.0-2.4)", rotation angle = 0
  Source counts = 54.5 +/- 11.1
  Background counts = 68.8
  Rate = 0.002 +/- 0.0003
[Mon Nov 28 17:54:48 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:54:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:54:48 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:54:48 2011] Source does appear to be extended
[Mon Nov 28 17:54:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 18:19:16 2011] Writing source region out to fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19_src.reg
[Mon Nov 28 18:19:16 2011] Extracting stamp from image fullrun_ccd3_acisf13157_pi14-548_cl_sm2.00.img.gz, (365, 772) - (575, 983)
[Mon Nov 28 18:19:16 2011] Writing fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19.gif
[Mon Nov 28 18:23:35 2011] Size of ../../acisf13157/products/events/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19_src.evt.gz[events] = 344 counts
[Mon Nov 28 18:23:35 2011] Mean chipx,y = (800.05, 427.75)
[Mon Nov 28 18:23:35 2011] Mean tdetx,y = (4704.25, 3861.05)
[Mon Nov 28 18:23:35 2011] chipx,y range = (770.00-835.00, 393.00-461.00)
[Mon Nov 28 18:23:35 2011] Size of ../../acisf13157/products/events/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 2093 counts
[Mon Nov 28 18:23:36 2011] Not generating rmf since there are only 54 counts
[Mon Nov 28 18:23:36 2011] arf not found, will run specextract
[Mon Nov 28 18:23:58 2011] ../../acisf13157/products/spectra/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19.warf not found
[Mon Nov 28 18:23:58 2011] ../../acisf13157/products/spectra/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19.wrmf not found
[Mon Nov 28 18:23:58 2011] Removal of ../../acisf13157/products/spectra/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19.soff failed
[Mon Nov 28 18:33:26 2011] Spectrum 19 has only 54 counts, deleting rmf
[Mon Nov 28 18:33:26 2011] 188.349
[Mon Nov 28 18:33:30 2011] Updating aperture counts using extracted products
[Mon Nov 28 18:33:30 2011] Error reading totcts from fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19_src.pi.gz
[Mon Nov 28 18:33:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 18:33:30 2011] Using photon index=1.80, rate=0.00155, arf fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19.arf
[Mon Nov 28 18:33:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 28 18:33:30 2011] Updating source flux to 2.1e-14
[Mon Nov 28 18:33:50 2011] Flag b found in src. 19 procflags, skipping spectral fitting
[Mon Nov 28 18:33:50 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Nov 28 18:33:51 2011] acisf13157/analysis//spectral/fullrun_ccd3_acisf13157_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete