[Mon Nov 28 14:47:48 2011] Detection parameters:
  Position = (1146.3, 581.3) = 12 15 13.05 -65 27 53.1
  Extent = 0.5" x 0.5", rotation angle = 154 degrees
  Source counts = 138.1 +/- 12.1
  Background counts = 7.9
  Rate = 0.004 +/- 0.0003

[Mon Nov 28 14:47:48 2011] Off-axis axis estimate = 2.87'
[Mon Nov 28 15:19:22 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 15:19:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 15:19:22 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Mon Nov 28 15:19:22 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.848
[Mon Nov 28 15:19:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.56"
[Mon Nov 28 15:44:34 2011] fullrun_ccd1_acisf13157_pi14-548_cl_pass0_src1.ximg exists
[Mon Nov 28 15:44:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13157_pi14-548_cl_pass0_src1.csv
[Mon Nov 28 15:44:34 2011] fullrun_ccd1_acisf13157_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Nov 28 15:44:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13157_pi14-548_cl_pass0_src1.csv
[Mon Nov 28 15:44:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13157_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13157_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 15:44:35 2011] fullrun_ccd1_acisf13157_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 15:44:35 2011] fullrun_ccd1_acisf13157_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 15:44:35 2011] Fit fullrun_ccd1_acisf13157_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 16:27:14 2011] Spatial fit model total counts = 155.557000, observed total counts = 153.000000
[Mon Nov 28 16:27:14 2011] Offset between fit and detection position for source 10 = 0.631575 pixels
[Mon Nov 28 16:27:14 2011] 156.423800 total counts/ 21.298800 bgd. counts: snr = 29.279128
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.631575 pixels
  Position = (1146.7, 581.8) = 12 15 13.06 -65 27 53.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 135.1 +/- 12.5
  Background counts = 21.3
  Rate = 0.004 +/- 0.0004
[Mon Nov 28 16:27:14 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 16:27:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 16:27:14 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 16:27:14 2011] Source does appear to be extended
[Mon Nov 28 16:27:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 16:50:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 16:50:26 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Mon Nov 28 16:50:26 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.016
[Mon Nov 28 16:50:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.49"
[Mon Nov 28 17:12:40 2011] fullrun_ccd1_acisf13157_pi14-548_cl_pass1_src1.ximg exists
[Mon Nov 28 17:12:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13157_pi14-548_cl_pass1_src1.csv
[Mon Nov 28 17:12:40 2011] fullrun_ccd1_acisf13157_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Nov 28 17:12:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13157_pi14-548_cl_pass1_src1.csv
[Mon Nov 28 17:12:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13157_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13157_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 17:12:40 2011] fullrun_ccd1_acisf13157_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Nov 28 17:12:40 2011] fullrun_ccd1_acisf13157_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Nov 28 17:12:40 2011] Fit fullrun_ccd1_acisf13157_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Nov 28 17:54:44 2011] Spatial fit model total counts = 152.999000, observed total counts = 153.000000
[Mon Nov 28 17:54:44 2011] Offset between fit and detection position for source 10 = 0.006006 pixels
[Mon Nov 28 17:54:44 2011] 153.826400 total counts/ 20.984400 bgd. counts: snr = 28.999274
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.006006 pixels
  Position = (1146.7, 581.8) = 12 15 13.06 -65 27 53.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 132.8 +/- 12.4
  Background counts = 21.0
  Rate = 0.004 +/- 0.0004
[Mon Nov 28 17:54:44 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 17:54:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 17:54:44 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 17:54:44 2011] Source does appear to be extended
[Mon Nov 28 17:54:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 18:03:40 2011] Writing source region out to fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10_src.reg
[Mon Nov 28 18:03:40 2011] Extracting stamp from image fullrun_ccd1_acisf13157_pi14-548_cl_sm2.00.img.gz, (1124, 559) - (1169, 604)
[Mon Nov 28 18:03:40 2011] Writing fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10.gif
[Mon Nov 28 18:03:42 2011] Size of ../../acisf13157/products/events/fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10_src.evt.gz[events] = 137 counts
[Mon Nov 28 18:03:42 2011] Mean chipx,y = (145.05, 785.88)
[Mon Nov 28 18:03:42 2011] Mean tdetx,y = (4346.12, 4252.05)
[Mon Nov 28 18:03:42 2011] chipx,y range = (128.00-165.00, 766.00-802.00)
[Mon Nov 28 18:03:42 2011] Size of ../../acisf13157/products/events/fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 45 counts
[Mon Nov 28 18:03:43 2011] rmf not found, will run specextract
[Mon Nov 28 18:03:43 2011] arf not found, will run specextract
[Mon Nov 28 18:04:08 2011] ../../acisf13157/products/spectra/fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10.warf not found
[Mon Nov 28 18:04:08 2011] ../../acisf13157/products/spectra/fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10.wrmf not found
[Mon Nov 28 18:04:08 2011] Removal of ../../acisf13157/products/spectra/fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10.soff failed
[Mon Nov 28 18:12:43 2011] Keeping rmf generated by specextract
[Mon Nov 28 18:12:43 2011] 201.655
[Mon Nov 28 18:33:29 2011] Updating aperture counts using extracted products
[Mon Nov 28 18:33:29 2011] Error reading totcts from fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Nov 28 18:33:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 18:33:29 2011] Using photon index=1.80, rate=0.00378, arf fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10.arf
[Mon Nov 28 18:33:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 28 18:33:29 2011] Updating source flux to 4.9e-14
[Mon Nov 28 18:33:49 2011] Reading fit data from acisf13157/analysis//spectral/fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10_pl.csv
[Mon Nov 28 18:33:49 2011] Spectral fit parameter nH value = 1.56722e+21
[Mon Nov 28 18:33:49 2011] Spectral fit parameter PhoIndex value = 3.92297
[Mon Nov 28 18:33:49 2011] Failed to get F(0.3-8.0) from acisf13157/analysis//spectral/fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Mon Nov 28 18:33:49 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 18:33:49 2011] Using Nh = 1.6e+21, photon index=3.92, rate=0.00378, arf fullrun_ccd1_acisf13157_pi14-548_pass1_cl_src10.arf
[Mon Nov 28 18:33:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 28 18:33:49 2011] Updating source flux to 3.9e-14