[Sat Sep 24 22:48:52 2011] Detection parameters:
  Position = (187.5, 142.5) = 5 34 30.29 22 0 52.6
  Extent = 0.5" x 0.5", rotation angle = 167 degrees
  Source counts = 1590.9 +/- 83.4
  Background counts = 5358.1
  Rate = 1 +/- 0.07

[Sat Sep 24 22:49:13 2011] Off-axis axis estimate = 0.23'
[Sat Sep 24 22:57:37 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 22:57:37 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Sep 24 22:57:37 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.268
[Sat Sep 24 22:57:37 2011] Giving source the simple spatial ID 91 for pass 0, mean size = 0.41"
[Sat Sep 24 22:57:41 2011] fullrun_ccd7_acisf13151_pi14-548_cl_pass0_src91.ximg exists
[Sat Sep 24 22:57:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13151_pi14-548_cl_pass0_src91.csv
[Sat Sep 24 22:57:41 2011] fullrun_ccd7_acisf13151_pi14-548_cl_pass0_src91_1.ximg exists
[Sat Sep 24 22:57:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13151_pi14-548_cl_pass0_src91.csv
[Sat Sep 24 22:57:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13151_pi14-548_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13151_pi14-548_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 22:57:44 2011] fullrun_ccd7_acisf13151_pi14-548_cl_pass0_tfrozen_src91.ximg exists
[Sat Sep 24 22:57:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13151_pi14-548_cl_pass0_tfrozen_src91.csv
[Sat Sep 24 22:57:44 2011] fullrun_ccd7_acisf13151_pi14-548_cl_pass0_tfrozen_src91_1.ximg exists
[Sat Sep 24 22:57:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13151_pi14-548_cl_pass0_tfrozen_src91.csv
[Sat Sep 24 22:57:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13151_pi14-548_cl_pass0_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13151_pi14-548_cl_pass0_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 22:58:16 2011] Spatial fit model total counts = 33126.100000, observed total counts = 36905.000000
[Sat Sep 24 22:58:16 2011] Poor agreement between spatial fit and data for source 91
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Sep 24 22:58:16 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 22:58:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 22:58:16 2011] Assessing source extent using major
[Sat Sep 24 22:58:16 2011] Source does appear to be extended
[Sat Sep 24 22:58:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 22:58:16 2011] Source is confused with source 95
[Sat Sep 24 22:58:48 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 22:58:48 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Sep 24 22:58:48 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.268
[Sat Sep 24 22:58:48 2011] Giving source the simple spatial ID 91 for pass 1, mean size = 0.41"
[Sat Sep 24 22:58:55 2011] fullrun_ccd7_acisf13151_pi14-548_cl_pass1_src91.ximg exists
[Sat Sep 24 22:58:55 2011] fullrun_ccd7_acisf13151_pi14-548_cl_pass1_src91_1.ximg exists
[Sat Sep 24 22:58:55 2011] Fit fullrun_ccd7_acisf13151_pi14-548_cl_pass1_src91 appears to have run properly
[Sat Sep 24 22:58:59 2011] fullrun_ccd7_acisf13151_pi14-548_cl_pass1_tfrozen_src91.ximg exists
[Sat Sep 24 22:58:59 2011] fullrun_ccd7_acisf13151_pi14-548_cl_pass1_tfrozen_src91_1.ximg exists
[Sat Sep 24 22:58:59 2011] Fit fullrun_ccd7_acisf13151_pi14-548_cl_pass1_tfrozen_src91 appears to have run properly
[Sat Sep 24 22:59:27 2011] Spatial fit model total counts = 34861.500000, observed total counts = 38551.000000
[Sat Sep 24 22:59:27 2011] Offset between fit and detection position for source 91 = 4.615216 pixels
[Sat Sep 24 22:59:27 2011] Warning, changing simple spatial fit ID from 91 to 88
[Sat Sep 24 22:59:27 2011] 32154.710000 total counts/ 25600.000000 bgd. counts: snr = 40.966938
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 4.615216 pixels
  Position = (183.1, 144.0) = 5 34 30.46 22 0 53.1
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 6554.7 +/- 179.3
  Background counts = 25600.0
  Rate = 5 +/- 0.1
[Sat Sep 24 22:59:28 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 22:59:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 22:59:28 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 22:59:28 2011] Source does appear to be extended
[Sat Sep 24 22:59:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 23:00:22 2011] Not overwriting source region fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_src.reg
[Sat Sep 24 23:00:22 2011] Extracting stamp from image fullrun_ccd7_acisf13151_pi14-548_cl_sm2.00.img.gz, (115, 75) - (252, 213)
[Sat Sep 24 23:00:23 2011] Writing fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91.gif
[Sat Sep 24 23:35:35 2011] ../../acisf13151/products/events/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_src.evt and ../../acisf13151/products/events/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_bgd.evt exist, delete to re-create
[Sat Sep 24 23:35:35 2011] Size of ../../acisf13151/products/events/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_src.evt.gz[events] = 68116 counts
[Sat Sep 24 23:35:35 2011] Mean chipx,y = (202.03, 231.81)
[Sat Sep 24 23:35:35 2011] Mean tdetx,y = (4119.03, 1933.81)
[Sat Sep 24 23:35:35 2011] chipx,y range = (188.00-217.00, 218.00-246.00)
[Sat Sep 24 23:35:35 2011] Size of ../../acisf13151/products/events/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_bgd.evt.gz[events] = 27902 counts
[Sat Sep 24 23:35:35 2011] ../../acisf13151/products/images/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_src.img and ../../acisf13151/products/images/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_bgd.img exist, delete to re-create
[Sat Sep 24 23:35:35 2011] rmf not found, will run specextract
[Sat Sep 24 23:35:35 2011] arf not found, will run specextract
[Sat Sep 24 23:35:48 2011] ../../acisf13151/products/spectra/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91.warf not found
[Sat Sep 24 23:35:48 2011] ../../acisf13151/products/spectra/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91.wrmf not found
[Sat Sep 24 23:35:48 2011] Removal of ../../acisf13151/products/spectra/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91.soff failed
[Sat Sep 24 23:35:55 2011] ../../acisf13151/products/lightcurves/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_src.lc and ../../acisf13151/products/lightcurves/fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_bgd.lc exist, delete to re-create
[Sat Sep 24 23:59:40 2011] Keeping rmf generated by specextract
[Sat Sep 24 23:59:40 2011] 236.702
[Sat Sep 24 23:59:54 2011] Updating aperture counts using extracted products
[Sat Sep 24 23:59:54 2011] Error reading totcts from fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91_src.pi.gz
[Sun Sep 25 00:00:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 00:00:01 2011] Using photon index=1.80, rate=5.43, arf fullrun_ccd7_acisf13151_pi14-548_pass1_cl_src91.arf
[Sun Sep 25 00:00:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 00:00:01 2011] Updating source flux to 4.8e-11
[Sun Sep 25 00:00:11 2011] Flag p found in src. 91 procflags, skipping spectral fitting
[Sun Sep 25 00:00:11 2011] Flag c found in src. 91 procflags, skipping spectral fitting