[Wed Feb 15 04:07:31 2012] Detection parameters:
  Position = (96.7, 688.8) = 19 58 14.23 -30 15 59.1
  Extent = 0.7" x 0.5", rotation angle = 126 degrees
  Source counts = 12.4 +/- 3.6
  Background counts = 0.6
  Rate = 0.0003 +/- 9e-05

[Wed Feb 15 04:07:32 2012] Off-axis axis estimate = 4.59'
[Wed Feb 15 04:09:41 2012] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 04:09:41 2012] Initial guess for spatial extent in simple fitting = 1.02"
[Wed Feb 15 04:09:41 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.864
[Wed Feb 15 04:09:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.02"
[Wed Feb 15 04:30:43 2012] fullrun_ccd0_acisf13136_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 15 04:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13136_pi14-548_cl_pass0_src1.csv
[Wed Feb 15 04:30:43 2012] fullrun_ccd0_acisf13136_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 15 04:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13136_pi14-548_cl_pass0_src1.csv
[Wed Feb 15 04:30:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13136_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13136_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 04:30:43 2012] fullrun_ccd0_acisf13136_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 15 04:30:43 2012] fullrun_ccd0_acisf13136_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 15 04:30:43 2012] Fit fullrun_ccd0_acisf13136_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 15 05:53:19 2012] Spatial fit model total counts = 19.824800, observed total counts = 20.000000
[Wed Feb 15 05:53:19 2012] Offset between fit and detection position for source 2 = 0.894764 pixels
[Wed Feb 15 05:53:19 2012] 19.844400 total counts/ 0.000000 bgd. counts: snr = 5944982064717963.000000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.894764 pixels
  Position = (96.8, 689.7) = 19 58 14.25 -30 15 58.9
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 19.8 +/- 4.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed Feb 15 05:53:19 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 05:53:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 05:53:19 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 05:53:19 2012] Source does appear to be extended
[Wed Feb 15 05:53:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 05:53:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 05:53:41 2012] Initial guess for spatial extent in simple fitting = 1.06"
[Wed Feb 15 05:53:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.778
[Wed Feb 15 05:53:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.06"
[Wed Feb 15 06:11:21 2012] fullrun_ccd0_acisf13136_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 15 06:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13136_pi14-548_cl_pass1_src1.csv
[Wed Feb 15 06:11:21 2012] fullrun_ccd0_acisf13136_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 15 06:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13136_pi14-548_cl_pass1_src1.csv
[Wed Feb 15 06:11:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13136_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13136_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 06:11:21 2012] fullrun_ccd0_acisf13136_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 15 06:11:21 2012] fullrun_ccd0_acisf13136_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 15 06:11:21 2012] Fit fullrun_ccd0_acisf13136_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 15 07:16:19 2012] Spatial fit model total counts = 19.667800, observed total counts = 20.000000
[Wed Feb 15 07:16:19 2012] Offset between fit and detection position for source 2 = 0.092898 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.092898 pixels
  Position = (96.7, 689.8) = 19 58 14.25 -30 15 58.9
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 19.7 +/- 4.4
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed Feb 15 07:16:20 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 07:16:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 07:16:20 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 07:16:20 2012] Source does appear to be extended
[Wed Feb 15 07:16:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 07:16:40 2012] Writing source region out to fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2_src.reg
[Wed Feb 15 07:16:40 2012] Extracting stamp from image fullrun_ccd0_acisf13136_pi14-548_cl_sm2.00.img.gz, (49, 642) - (145, 738)
[Wed Feb 15 07:16:40 2012] Writing fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2.gif
[Wed Feb 15 07:17:18 2012] Size of ../../acisf13136/products/events/fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2_src.evt.gz[events] = 19 counts
[Wed Feb 15 07:17:18 2012] Mean chipx,y = (1010.89, 497.53)
[Wed Feb 15 07:17:18 2012] Mean tdetx,y = (3558.53, 4121.11)
[Wed Feb 15 07:17:18 2012] chipx,y range = (1002.00-1021.00, 480.00-518.00)
[Wed Feb 15 07:17:18 2012] Size of ../../acisf13136/products/events/fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 17 counts
[Wed Feb 15 07:17:19 2012] Not generating rmf since there are only 19 counts
[Wed Feb 15 07:17:19 2012] arf not found, will run specextract
[Wed Feb 15 07:17:45 2012] ../../acisf13136/products/spectra/fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2.warf not found
[Wed Feb 15 07:17:45 2012] ../../acisf13136/products/spectra/fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2.wrmf not found
[Wed Feb 15 07:17:45 2012] Removal of ../../acisf13136/products/spectra/fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2.soff failed
[Wed Feb 15 07:24:09 2012] Spectrum 2 has only 20 counts, deleting rmf
[Wed Feb 15 07:24:09 2012] 78.5246
[Wed Feb 15 07:47:52 2012] Updating aperture counts using extracted products
[Wed Feb 15 07:47:52 2012] Error reading totcts from fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Feb 15 07:47:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 07:47:53 2012] Using photon index=1.80, rate=0.000498, arf fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2.arf
[Wed Feb 15 07:47:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 07:47:53 2012] Updating source flux to 1.4e-14
[Wed Feb 15 07:47:56 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 15 07:47:57 2012] acisf13136/analysis//spectral/fullrun_ccd0_acisf13136_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete