[Tue Jan 31 08:49:36 2012] Detection parameters:
  Position = (767.9, 324.7) = 14 33 10.24 33 54 21.8
  Extent = 2.8" x 1.7", rotation angle = 37 degrees
  Source counts = 242.1 +/- 16.1
  Background counts = 16.9
  Rate = 0.009 +/- 0.0006

[Tue Jan 31 08:49:36 2012] Off-axis axis estimate = 8.51'
[Tue Jan 31 09:00:19 2012] Using EEF radius (= 3.20 ")to estimate initial spatial extent for simple fitting
[Tue Jan 31 09:00:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 31 09:00:19 2012] Initial guess for spatial extent in simple fitting = 3.20"
[Tue Jan 31 09:00:19 2012] source mask rpix=6.5, npix_max = 196, mask sum = 196, frac = 0.999
[Tue Jan 31 09:00:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.20"
[Tue Jan 31 09:21:19 2012] fullrun_ccd1_acisf13134_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 31 09:21:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13134_pi14-548_cl_pass0_src1.csv
[Tue Jan 31 09:21:19 2012] fullrun_ccd1_acisf13134_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 31 09:21:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13134_pi14-548_cl_pass0_src1.csv
[Tue Jan 31 09:21:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13134_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13134_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 31 09:21:19 2012] fullrun_ccd1_acisf13134_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 31 09:21:19 2012] fullrun_ccd1_acisf13134_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 31 09:21:19 2012] Fit fullrun_ccd1_acisf13134_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 31 10:28:29 2012] Spatial fit model total counts = 260.862000, observed total counts = 260.000000
[Tue Jan 31 10:28:29 2012] Offset between fit and detection position for source 13 = 0.239426 pixels
[Tue Jan 31 10:28:29 2012] 261.495900 total counts/ 31.118900 bgd. counts: snr = 41.297808
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.239426 pixels
  Position = (767.7, 324.8) = 14 33 10.27 33 54 21.6
  Extent = 2.3 (2.1-2.6)", rotation angle = 0
  Source counts = 230.4 +/- 16.2
  Background counts = 31.1
  Rate = 0.008 +/- 0.0006
[Tue Jan 31 10:28:29 2012] Vigneting correction estimate = 1.000000
[Tue Jan 31 10:28:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 31 10:28:29 2012] Assessing source extent using major axis lower bound
[Tue Jan 31 10:28:29 2012] Source does appear to be extended
[Tue Jan 31 10:28:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 31 10:34:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 31 10:34:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 31 10:34:37 2012] Initial guess for spatial extent in simple fitting = 2.32"
[Tue Jan 31 10:34:37 2012] source mask rpix=4.7, npix_max = 108, mask sum = 110, frac = 1.015
[Tue Jan 31 10:34:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.32"
[Tue Jan 31 10:54:11 2012] fullrun_ccd1_acisf13134_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 31 10:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13134_pi14-548_cl_pass1_src1.csv
[Tue Jan 31 10:54:11 2012] fullrun_ccd1_acisf13134_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 31 10:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13134_pi14-548_cl_pass1_src1.csv
[Tue Jan 31 10:54:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13134_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13134_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 31 10:54:11 2012] fullrun_ccd1_acisf13134_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 31 10:54:11 2012] fullrun_ccd1_acisf13134_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 31 10:54:11 2012] Fit fullrun_ccd1_acisf13134_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 31 11:57:50 2012] Spatial fit model total counts = 254.297000, observed total counts = 252.000000
[Tue Jan 31 11:57:50 2012] Offset between fit and detection position for source 13 = 0.126411 pixels
[Tue Jan 31 11:57:50 2012] 254.633500 total counts/ 38.894500 bgd. counts: snr = 34.592708
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.126411 pixels
  Position = (767.6, 324.9) = 14 33 10.27 33 54 21.7
  Extent = 2.1 (1.9-2.4)", rotation angle = 0
  Source counts = 215.7 +/- 16.0
  Background counts = 38.9
  Rate = 0.008 +/- 0.0006
[Tue Jan 31 11:57:50 2012] Vigneting correction estimate = 1.000000
[Tue Jan 31 11:57:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 31 11:57:50 2012] Assessing source extent using major axis lower bound
[Tue Jan 31 11:57:50 2012] Source does appear to be extended
[Tue Jan 31 11:57:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 31 12:03:09 2012] Writing source region out to fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13_src.reg
[Tue Jan 31 12:03:09 2012] Extracting stamp from image fullrun_ccd1_acisf13134_pi14-548_cl_sm2.00.img.gz, (671, 228) - (864, 422)
[Tue Jan 31 12:03:09 2012] Writing fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13.gif
[Tue Jan 31 12:03:10 2012] Size of ../../acisf13134/products/events/fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13_src.evt.gz[events] = 243 counts
[Tue Jan 31 12:03:10 2012] Mean chipx,y = (477.12, 164.48)
[Tue Jan 31 12:03:10 2012] Mean tdetx,y = (4967.52, 4584.12)
[Tue Jan 31 12:03:10 2012] chipx,y range = (446.00-505.00, 136.00-191.00)
[Tue Jan 31 12:03:10 2012] Size of ../../acisf13134/products/events/fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 64 counts
[Tue Jan 31 12:03:11 2012] rmf not found, will run specextract
[Tue Jan 31 12:03:11 2012] arf not found, will run specextract
[Tue Jan 31 12:03:32 2012] ../../acisf13134/products/spectra/fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13.warf not found
[Tue Jan 31 12:03:32 2012] ../../acisf13134/products/spectra/fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13.wrmf not found
[Tue Jan 31 12:03:32 2012] Removal of ../../acisf13134/products/spectra/fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13.soff failed
[Tue Jan 31 12:07:53 2012] Keeping rmf generated by specextract
[Tue Jan 31 12:07:53 2012] 172.197
[Tue Jan 31 12:25:45 2012] Updating aperture counts using extracted products
[Tue Jan 31 12:25:45 2012] Error reading totcts from fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13_src.pi.gz
[Tue Jan 31 12:25:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 31 12:25:45 2012] Using photon index=1.80, rate=0.00779, arf fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13.arf
[Tue Jan 31 12:25:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 31 12:25:45 2012] Updating source flux to 1.1e-13
[Tue Jan 31 12:25:54 2012] Reading fit data from acisf13134/analysis//spectral/fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13_pl.csv
[Tue Jan 31 12:25:54 2012] Spectral fit parameter nH value = 1.58379e+21
[Tue Jan 31 12:25:54 2012] Spectral fit parameter PhoIndex value = 1.80421
[Tue Jan 31 12:25:54 2012] Failed to get F(0.3-8.0) from acisf13134/analysis//spectral/fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Tue Jan 31 12:25:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 31 12:25:54 2012] Using Nh = 1.6e+21, photon index=1.80, rate=0.00779, arf fullrun_ccd1_acisf13134_pi14-548_pass1_cl_src13.arf
[Tue Jan 31 12:25:54 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 31 12:25:54 2012] Updating source flux to 1e-13