[Tue Jan 31 11:37:55 2012] Detection parameters:
  Position = (101.5, 852.5) = 14 29 17.23 34 21 30.0
  Extent = 0.5" x 0.5", rotation angle = 9 degrees
  Source counts = 308.0 +/- 17.6
  Background counts = 1.0
  Rate = 0.01 +/- 0.0006

[Tue Jan 31 11:37:55 2012] Off-axis axis estimate = 1.09'
[Tue Jan 31 12:26:32 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Jan 31 12:26:32 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Jan 31 12:26:32 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.388
[Tue Jan 31 12:26:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Tue Jan 31 12:39:37 2012] fullrun_ccd3_acisf13133_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 31 12:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13133_pi14-548_cl_pass0_src1.csv
[Tue Jan 31 12:39:37 2012] fullrun_ccd3_acisf13133_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 31 12:39:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13133_pi14-548_cl_pass0_src1.csv
[Tue Jan 31 12:39:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13133_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13133_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 31 12:39:37 2012] fullrun_ccd3_acisf13133_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 31 12:39:37 2012] fullrun_ccd3_acisf13133_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 31 12:39:37 2012] Fit fullrun_ccd3_acisf13133_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 31 13:09:57 2012] Spatial fit model total counts = 312.000000, observed total counts = 312.000000
[Tue Jan 31 13:09:57 2012] Offset between fit and detection position for source 2 = 0.698431 pixels
[Tue Jan 31 13:09:57 2012] 312.003510 total counts/ 7.426510 bgd. counts: snr = 111.764716
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.698431 pixels
  Position = (102.0, 853.0) = 14 29 17.23 34 21 30.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 304.6 +/- 17.7
  Background counts = 7.4
  Rate = 0.01 +/- 0.0006
[Tue Jan 31 13:09:57 2012] Vigneting correction estimate = 1.000000
[Tue Jan 31 13:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 31 13:09:57 2012] Assessing source extent using major axis lower bound
[Tue Jan 31 13:09:57 2012] Source does appear to be extended
[Tue Jan 31 13:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 31 13:49:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 31 13:49:56 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Tue Jan 31 13:49:56 2012] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.508
[Tue Jan 31 13:49:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.44"
[Tue Jan 31 14:02:46 2012] fullrun_ccd3_acisf13133_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 31 14:02:46 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13133_pi14-548_cl_pass1_src1.csv
[Tue Jan 31 14:02:46 2012] fullrun_ccd3_acisf13133_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 31 14:02:46 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13133_pi14-548_cl_pass1_src1.csv
[Tue Jan 31 14:02:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13133_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13133_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 31 14:02:46 2012] fullrun_ccd3_acisf13133_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 31 14:02:46 2012] fullrun_ccd3_acisf13133_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 31 14:02:46 2012] Fit fullrun_ccd3_acisf13133_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 31 14:33:03 2012] Spatial fit model total counts = 311.000000, observed total counts = 311.000000
[Tue Jan 31 14:33:03 2012] Offset between fit and detection position for source 2 = 0.001155 pixels
[Tue Jan 31 14:33:03 2012] 310.922990 total counts/ 6.003990 bgd. counts: snr = 124.441291
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001155 pixels
  Position = (102.0, 853.0) = 14 29 17.23 34 21 30.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 304.9 +/- 17.6
  Background counts = 6.0
  Rate = 0.01 +/- 0.0006
[Tue Jan 31 14:33:03 2012] Vigneting correction estimate = 1.000000
[Tue Jan 31 14:33:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 31 14:33:03 2012] Assessing source extent using major axis lower bound
[Tue Jan 31 14:33:03 2012] Source does appear to be extended
[Tue Jan 31 14:33:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 31 14:58:04 2012] Writing source region out to fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2_src.reg
[Tue Jan 31 14:58:04 2012] Extracting stamp from image fullrun_ccd3_acisf13133_pi14-548_cl_sm2.00.img.gz, (82, 833) - (122, 873)
[Tue Jan 31 14:58:04 2012] Writing fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2.gif
[Tue Jan 31 14:58:06 2012] Size of ../../acisf13133/products/events/fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2_src.evt.gz[events] = 306 counts
[Tue Jan 31 14:58:06 2012] Mean chipx,y = (959.71, 896.41)
[Tue Jan 31 14:58:06 2012] Mean tdetx,y = (4235.59, 4020.71)
[Tue Jan 31 14:58:06 2012] chipx,y range = (943.00-980.00, 880.00-914.00)
[Tue Jan 31 14:58:06 2012] Size of ../../acisf13133/products/events/fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 7 counts
[Tue Jan 31 14:58:07 2012] rmf not found, will run specextract
[Tue Jan 31 14:58:07 2012] arf not found, will run specextract
[Tue Jan 31 14:58:41 2012] ../../acisf13133/products/spectra/fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2.warf not found
[Tue Jan 31 14:58:41 2012] ../../acisf13133/products/spectra/fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2.wrmf not found
[Tue Jan 31 14:58:41 2012] Removal of ../../acisf13133/products/spectra/fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2.soff failed
[Tue Jan 31 15:09:02 2012] Keeping rmf generated by specextract
[Tue Jan 31 15:09:02 2012] 202.254
[Tue Jan 31 15:10:47 2012] Updating aperture counts using extracted products
[Tue Jan 31 15:10:47 2012] Error reading totcts from fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Jan 31 15:10:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 31 15:10:47 2012] Using photon index=1.80, rate=0.0104, arf fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2.arf
[Tue Jan 31 15:10:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 31 15:10:47 2012] Updating source flux to 1.2e-13
[Tue Jan 31 15:11:03 2012] Reading fit data from acisf13133/analysis//spectral/fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2_pl.csv
[Tue Jan 31 15:11:03 2012] Spectral fit parameter nH value = 3.80277e+20
[Tue Jan 31 15:11:03 2012] Spectral fit parameter PhoIndex value = 2.1132
[Tue Jan 31 15:11:03 2012] Failed to get F(0.3-8.0) from acisf13133/analysis//spectral/fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jan 31 15:11:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 31 15:11:03 2012] Using Nh = 3.8e+20, photon index=2.11, rate=0.0104, arf fullrun_ccd3_acisf13133_pi14-548_pass1_cl_src2.arf
[Tue Jan 31 15:11:03 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 31 15:11:03 2012] Updating source flux to 1.1e-13